Biontech Btm-303d User manual

* There is a protection lm on the control panel of this product.

* Please read each section thoroughly for proper unit usage.

* Keep the manual in a safe place and refer to it whenever needed.

* The manufacture and distribution company will not be held responsible for any

malfunction or accidents resulting from incorrect installation or improper handling.

BIONTECH Co., Ltd.

OPERATION MANUAL

Model : BTM-303D

BTM-303D (영).indd 1 2016-08-31 오후 1:26:05

Table of contents

Please have the Ionizer installed according to the directions in this manual.

It is advisable that a competent plumber perform the installation.

Installation and operation should be carried out in conformance with building and construction

codes, running water regulations and city ordinances.

During the nal inspection, be sure to check for leakage, ow rate and full operation of all functions.

After completing the installation, read the manual and take a pH measurement with supplied pH test

reagent drop (See Page 19).

Depending on local water quality, pH of the water may vary, particularly in areas where well water is

supplied as tap water.

1. Parts ............................................................................................................................................................

2. Name and description of each part ........................................................................................................

3. Safety preparations ...................................................................................................................................

4. Installing Your Ionizer ...............................................................................................................................

•Precautions for Installation..........................................................................................................................

•lnstallation Directions..................................................................................................................................

5. Prior to Use ............................................................................................................................................

•Precautions for using the product .............................................................................................................

•Using the product appropriately for each purpose .....................................................................................

•Directions for Storage and Maintenance After Use ...................................................................................

6. Producing Ionized Water ........................................................................................................................

•Selecting Alkaline Ionized Water ..............................................................................................................

•Selecting Acidic Ionized Water .................................................................................................................

•Selecting Puried Water ..........................................................................................................................

•Self Cleaning ...........................................................................................................................................

•pH(Ion Concentration) Measurement ......................................................................................................

7. Filter Replacement ....................................................................................................................................

•Filter Replacement Period .....................................................................................................................

•Filter Replacement Procedure ................................................................................................................

8. Using the Cleaning Filter ....................................................................................................................

9. Using Ionized Water..................................................................................................................................

10. Support ....................................................................................................................................................

•Questions and Answers (Q&A) .................................................................................................................

•About after service (A/S)...........................................................................................................................

11. Product Specications ............................................................................................................................

Table of contents

BTM-303D (영).indd 2 2016-08-31 오후 1:26:05

Parts

● The following components need to be checked before installation.

● The illustration shows basic components, their shapes may appear different

from the actual components

Diverter Valve(Optional) Adaptor(Small)

Flexible Alkaline Faucet

Wall-mountion Nails and Fuse

Hose

Hose Band Sagety Clip

Installation Drawing pH Comparison Sheet

Owner’s Manual

For Mounted Wall For Water Outlet

(Optional Item)

Acidic

Water

Outlet

pH Test Solution

Water Supply Valve Cover

X1 X1

X2 X1

2 Nails 2 Wall Plug

2 Screws 1 Fuse

Ø 7x9 PVC hose: 1m

1/4” standard hose: 2m (PE Reinforced hose)

Water outlet

● The supplied standard parts should be used, Installing parts that are not covered

in the warranty may be physically harmful and/or cause property damage.

* There is a protection lm on the control panel of this product.

* Please read each section thoroughly for proper unit usage.

* Keep the manual in a safe place and refer to it whenever needed.

* The manufacture and distribution company will not be held responsible for any

malfunction or accidents resulting from incorrect installation or improper handling.

BIONTECH Co., Ltd.

OPERATIONMANUAL

Model : BTM-303D

BTM-303D (영).indd 1 2016-08-26 오후 4:55:45

BTM-303D (영).indd 3 2016-08-31 오후 1:26:06

Front View

Bottom View

Rear View

Name and description

of each part

Acidic Water Outlet

Hose

Safety pin

For One-Touch

Fitting(1/4” X M10)

Tap Water

Hose

Safety pin

Back Panel

Control Panel

Ionized Water Outlet

Fornt Panel

Filter Cover

Bottom Panel

Acidic Water Outlet

Water Inlet

Fuse Holder

Audio Speaker

Audio Volume Control

Water Supply Control Valve

Electric Cord

Wall-mounting Groove

Cover for circuit board and internal ionizer parts.

Function controls and display.

Outlet for either alkaline or acidic water (user-selected.)

Circuit apparatus and devices.

Filter protection cover.

Transformer,electric cord,and devices for xing parts.

Outow of acidic water(control of acidic water quantity).

Tap water supply.

For wall mounting using nails.

Fuse.

Voice and Melody.

Loudness control.

Ionizer operation and water ow adjustment(On/Off).

Electric cord for connecting with the electric wall socket.

Number Name Function

BTM-303D (영).indd 4 2016-08-31 오후 1:26:07

Control Panel

Alkaline Water

Indication Lamp

- Lights up when alkaline

water is selected.

Acidic Water

Indication Lamp

- Lights up when Acidic

water is selected.

Filtered Water

Indication Lamp

- Lights up when ltered

water is selected.

Cleaning

Indication Lamp

- Lights up while cleaning and

cuts off automatically when

nished.

Drain

Indication Lamp

- Lights up after cleaning

when water is draining.

[Puried Water]

Selection Button

- Selecting Puried

Water only.

[Acidic Water]

Selection Buttons

-Selecting Acidic water:

[ Acidic ]

Phone No.

to order lters

- service center

information

[Alkaline Water]

Selection Buttons

-Selecting Alkaline

Water

(Alkaline 1,2,3,4)

Error Indication

- Electrolyzer overheat

- Failure of cleaning

- Overow indication

Indication light for

ow volume.

High indication light.

Indicating when the ow

volume is higher than the

appropriate level

Standard indication light

Indicating when the ow

volume is normal, and the

indication level is varies

depending on the ow

volume

Low Indication Lamp

Indicating when the ow

volume is lower than the

appropriate level

Filter Life Indication

IMPORTANT:

When seeing 3.5 on the display and the melody is playing please do Not drink the water until the melody

stops playing or you select a different setting.

BTM-303D (영).indd 5 2016-08-31 오후 1:26:07

Safety Preparations

Description of the symbol marks

The following describes the precautionary items that can prevent the potential damage to the

body or the property. The cases of misapplication and resultant risks are divided into Warning

and Caution items. You are required to read thoroughly and comply with the descriptions

considering they are related to your safety.

-Caution - You should read the documents marked with the following symbols.

- Prohibition

- Instruction

Marks

Classication

Description

●Indicates that deadly effect can be caused to the body if you use the product wrongly because of

your disregard for the items.

●Indicates the general items to be prohibited.

●Indicates the possibility of the product or components catching res due

to external sources of re.

●Indicates the possibility of the product causing electric shocks due to electric

leakage if it is submerged.

●Indicates the possibility of the product causing electric shocks if it is

disassembled

●Items related to the general behaviors of users.

●The plug needs to be disconnected from the wall socket if

there is a possibility of malfunctioning or lightening.

●Indicates that injury to the body or damage to the property can be caused. if you use the product

wrongly because of your disregard for the items.

Warning

Caution

General items to

be prohibited

Fire sources to be

prohibited

Showering to be

prohibited

Disassembly to

be prohibited

General

Disconnecting the plug

from the wall socket.

BTM-303D (영).indd 6 2016-08-31 오후 1:26:08

WEEE Directive

● Do not apply any different power voltage other than the indicated power voltage.

If not followed, res or electric shocks can be caused.

● Do not use any other fuse with different capacity.

● Stop using the product immediately when any malfunctioning is found.

● Do not handle the electric plug or operate the power button with wet hands.

If not followed, electrical shocks can be caused.

● Should hold the electric plug when inserting it into the wall socket or removing it from the socket.

● Damage to the electric cord, res or electrical shocks can be caused when if the cord is pulled.

● Clean the wall socket after removing the electric plug.

-When there are lots of dusts settled on it, re can be caused.

● Do not connect multiple cords to one single wall socket.

When a wall socket is shared, abnormal heat can be generated, possibly causing a re.

●

Electrical shocks, short-circuiting, ignition of res can be caused if a damaged electric cord or plug is used.

● Do not damage, process or forcibly wind or pull the electric cord.

-The cord can be damaged, possible leading to res or electric shocks.

● Do not x the electric cord by using a stapler.

-The cord can be damaged, possible leading to res or electric shocks.

● Electric shocks can be caused if the product is dropped into water by mistake.

The following measures need to be taken.

Remove the electric plug from the wall socket.

Recover the product from the water.

Contact the sales shop or the main ofce for advice.

● Should not arbitrarily modify, disassemble or repair the product.

If not followed, res and electric shocks can be caused.

The company will not be held responsible for any accidents generated from such activities.

- Warning - Should be followed for your safety.

BTM-303D (영).indd 7 2016-08-31 오후 1:26:08

Installing Your lonizer

Caution - Malfunction or accidents can be occured

● Do not place any other objects on the product.

● Do not install the product in the areas described as the following.

●If the product is dropped, electric shocks can be caused due to the internal malfunction following the

impact from the dropping. The product needs to be taken to the sales shop or the main ofce in order

for you to request an inspection.

●The purication lter can be broken due to freezing if the product is used in a place where it is freezing

cold, requiring the product, if not used, to be stored in a place where the breaking due to freezing can be

prevented, but after the purication lter is removed rst.

■ Installation Precautions

Caution

Reguiring you to check the rated voltage

before connecting the electric cord.

Should connect the product to the cool

water pipe (If connected to the warm

water pipe, the purication lter and the

electrolytic bath can be damaged)

Avoid any place where heat of re can be

directly contacted Do not modify the product arbitrarily.

Should hold the bottom plate of the

main case

Do not use the product in a place full

of moisture or dusts

■If not followed, the case can be

transformed, possibly leading to water

leakage

■If not followed, damage to the product or

risk to your safety can be caused.

■If not followed, the life span of the lter

will be shortened.

■It will be safe to move the product by

holding the product at the bottom plate.

■If not followed, damage to the product or

risk to your safety can be caused.

Do not install the product in a place where

the sunlight comes in directly or the

temperature goes below zero.

Precautions for connecting the acidic water

hose.

■If not followed, the case can be

transformed or broken due to freezing.

■Install the acidic water hose lower than the

main case.

■If the hose is longer than necessary or higher

than the main case, the ion generation can be

affected, possibly leading to a change in

the taste of water.

No warm water

BTM-303D (영).indd 8 2016-08-31 오후 1:26:08

●If the product is dropped, electric shocks can be caused due to the internal malfunction following the

impact from the dropping. The product needs to be taken to the sales shop or the main ofce in order

for you to request an inspection.

●The purication lter can be broken due to freezing if the product is used in a place where it is freezing

cold, requiring the product, if not used, to be stored in a place where the breaking due to freezing can be

prevented, but after the purication lter is removed rst.

■If not followed, damage to the product or

risk to your safety can be caused.

■Install the acidic water hose lower than the

main case.

■If the hose is longer than necessary or higher

than the main case, the ion generation can be

affected, possibly leading to a change in

the taste of water.

1. Disconnect the water tap from the water pipe.

2. Rotating the angle stop adaptor into the water pipe. (Single-water tap)

3. Assemble the water tap back into the adaptor. (Single-water tap)

4. Install the standard compliant adaptor between the water pipe and the water branch pipe.

Then install the which needs to be connected to the water ionizer to the cold water pipe, while

connecting the balancing adaptor to the warm water pipe. (Water taps for cold and warm water)

5. Place the rubber gaskets between the water pipes, water tap, and adaptor, and should

apply the Teon tape to the connection parts to assemble them.

6. Insert the inlet hose into the one-touch tting installed to the adaptor and then fasten the safety pin.

7. Adjust the water pressure control screw of the adaptor to a appropriate level

(Alkaline water ow standard: 1.5 ± 0.5 ℓ/min)

Should use the standard inlet hose (1/4”) and x the valve cover in the direction of the hose to

prevent the hose from being bent or the fastening nut from being loosened.

■ How to install

Caution

● Check whether the components to be installed at the water tap are appropriate.

● Should use the standard hose (1/4”), supplied by the company for the connection.

Use the one- touch adapter to fasten the hose before xing the safety pin as illustrated in Page 3.

- If the standard hose is not used, damage due to water pressure can be caused, possibly leading

to water leakage

● Do not connect the product to a warm water pipe.

- Degradation of purication capacity and malfunctioning can be caused.

Balance maintenance

water pressure control screw

Hot water

side

Cold

water

side

1. Wall mounted water tap

reducer tting

safety pins

BTM-303D (영).indd 9 2016-08-31 오후 1:26:08

[Drawing 1]

[Drawing 2]

Place of hole drilled

Connect the standard connection hose (1/4”) to the adapter

installed with one touch tting of union. (Drawing 3~4)

Insert the inlet hose into the one touch tting and insert

the safety pin as in drawing.

( Pls check if the hose has been securely tted to the end of one

thouch tting. if not, it causes water leakage for water pressure )

After the connection, adjust the

water pressure control

screw

of the adaptor

to an appropriate level.

(Alkaline water ow standard : 1.5±0.5ℓ/min )

8. Check any possible water leakage at the connection parts

after the installation

Groover

Cold water

1. Prepare the tools for installation as drawing : Electric drill,

Hole cutter, Pipe wrench or spanner, General screwdriver,

Teon tape 1pc (Drawing 1.)

2. Turn off the water valves before installation under the

sinkdeck.

3. Disconnet the water tap from the cold water pipe.

4. Drill a hole for the 1/4” hose appropriate place

somewhere in sinkdeck and make the connection to the

inlet of the product

5. Find the cold water pipe inside the sink deck and connect

the adapter to the cold water pipe (Drawing 2.) ■Should use the standard inlet hose (1/4”) and x the

valve cover in the direction of the hose to prevent the

hose from being bent or fastening nut from being loosened.

[Drawing 4]

■ The following tools ate necessary for installation work

Pipe wrench

or spanner

General

screwdriver

Teon tape

Electric drill

Hole cutter

Size:

Diameter1/4”

2. Deck type sink mounted water tap

Hot water

Water valve of Cold water

Ring nut

Water pipe

Steel Hose

[Optional]

Acidic Water Outlet

Water pressure control

screw (Spindle)

Running water line

connection Adaptor(small)

[Drawing 3]

BTM-303D (영).indd 10 2016-08-31 오후 1:26:09

Connect the standard connection hose (1/4”) to the adapter

installed with one touch tting of union. (Drawing 3~4)

Insert the inlet hose into the one touch tting and insert

the safety pin as in drawing.

( Pls check if the hose has been securely tted to the end of one

thouch tting. if not, it causes water leakage for water pressure )

After the connection, adjust the

water pressure control

screw

of the adaptor

to an appropriate level.

(Alkaline water ow standard : 1.5±0.5ℓ/min )

8. Check any possible water leakage at the connection parts

after the installation

3. Diverter Valve

4. Hose Connected Method

How to assemble the valve to the faucet

After nishing of connection, cover the water supply valve cover part with screws again.

valve cover

Tap water Hose

Safety pin

Hose

Diverter

valve

Nut

Assembly method of valve

for Deck-sink water taps

▲Take the little screen out

▲Tighten the screws with screw

driver, after inserting the rubber seal

* Water ows into ionizer when the lever is turned to side

* Water ows down ward when the lever is turned to down

Cold water inlet Nut

Cold water inlet Nut Cold water inlet Nut

Screw

The Adapter Screw

The Adapter

▲

▲Tighten the screws with

screw driver, after inserting

the rubber seal

▲Tighten the screws with

screw driver, after inserting

the rubber seal

BTM-303D (영).indd 11 2016-08-31 오후 1:26:10

Caution

● Do not install the product in the following areas:

- If not followed, malfunctioning can be caused.

•If vibration and impact can be fel

•If horizontality can not be acquired

•If direct sunlight comes in •If bathroom is installed or winds and rains can affect

•If there are lots of moisture or dust

•If there is a risk of breaking due to freezing

•lf heat of re can be felt

•lf damage can be caused to the product

● You are required to contact the sales shop or the specialized installer for queries when

you attach the product to the wall.

● Improper mounting may result in the product falling of, accident or mal-function.

Should use the standard inlet hose (1/4”) and x the valve cover in the direction of the hose to prevent the hose

from being bent or the fastening nut from being loosened. The safety pin needs to be inserted before using the

water.

●The product can be used conveniently by placing it on any place by applying the wall mounting or stand type

(Turn table) depending on the place of installation.

●After installation, connect the product to the power line.

●When the water ows through the product, the power will be turned on automatically. Then, select Puried

Water menu to enable the water branch pipe to open and close repeatedly to allow the water to ow for 2~3

minutes freely. Then push the pH button to set the desired concentration and compare it with pH comparison

sheet. The black water that will come out is the lter dusts owing with water, not dangerous to the body.

(Refer to How to measure the pH value in Page 18)

● First of all, assembling the flexible pipe to the half-moon shaped alkaline water outlet at the

upper part by turning it clockwise.

1. Measure the distance between the place for installation and the adapter installed to the water tap and then

cut the hose with an extra length.

2.Cut the PVC hose for the acidic water into the length of 50~70cm and place it lower than the product.

A) When installing the product onto the wall

● Apply water to the installation drawing and place it onto the wall

while keeping the horizontality

● Of those nailing positions at the width (1~3) or the height (2 ~4),

choose the convenient ones for driving 2 nails

● Place the hanging holes of the product onto the nails

:Positions of nails

1. Using Flat-head driver, adjust the loundness.

2. Screwing yellow nail to left, volume will be up.

Screwing it to opposite, Volume will be down.

B) When placing the product on the sink deck and its supports.

-Place the main case of the product on an appropriate position.

● When the above steps are nished, use the hose to connect the

valve cock of the adapter to the inlet pipe at the bottom of the

main case of the water ionizer

5. Steps for assembling the component before installing them

6. How to install in different places

7. Audio volume control

BTM-303D (영).indd 12 2016-08-31 오후 1:26:10

Important safeguards

Danger - To reduce the risk of electrocutions

Warning - To reduce the risk of burns, electrocution, re, or injury to persons

the appliance is not to be used by children or persons with reduced with reduced physical, sensory or mental

capabilities,or lack of experience and knowledge, unless they have been given superviision or instruction

2. children being supervised not to play with the appliance

■ In case of power failures.

• Turn off the water branch pipe in case of power failures.

(When letting water ow through, puried water will come out)

• Use the product normally when the power is recovered.

■ In case of suspension of water supply.

• Do not use the product.

• Stop the water from owing through when the water supply is suspended in the middle of using the product

Prior to Use

8. In case of power failures or suspension of water supply

When the water supplied is resumed, let the water ow sufciently for direct water supply or showering in

order to help the inside air and other materials come out. Without going through such steps, the water still

can be used normally, but with the risk of drastic decrease of the life span of the lter when allowing air or

other materials ow through the main body.

Precautions for use

When using electrical products, especially when children are present, basic safety precautions

should always be followed, including the followung:

READ ALL INSTRUCTIONS BEFORE USING

1. Always unplug this product immendiately after using.

2. Do not use while bathing.

3. Do not place or store product where it can fall or be pulled into a tub or sink.

4. Do not place in or drop into water or other liquid.

5. Do not reach for a product that has fallen into water. Unplug immediately.

1. A product should never be left unattended when plugged in.

2. Close supervision is necessary when this product is used by, on, or near children or invalids.

3. Use this product only for its intended use as described in this manual. Do not use attachments

not recommended by the manufacturer.

4. Never operate this product if it has a damaged cord or plug, if it is not working properly,

if it has been dropped or damaged, or dropped into water.

Return the product to a service center for examination and repair

5. Keep the cord away from heated surfaces.

6. Never block the air openings of the product or place ot on a soft surface, such as a bed or couch,

where the air openings may be blocked. keep the air openings free of lint, hair, and the like.

BTM-303D (영).indd 13 2016-08-31 오후 1:26:10

•Do not hold up the main case while holding the outlet exible pipe. (Cause for breakage)

•Do not operate the strong alkaline ionized water (level 5) continuously for a long period of time.

If you use the product in such manner, the system protective circuit (Temperature sensor) may be started,

depending on the quality of water, and the electrolysis can be suspended.

When using the product in a place where the water hardness is high.

•Before using the water initially daily, push the acidic water button to allow the acidic water to ow

through for about 1 minute.

•In case of tap water, in places where the water is used a lot. You need to push the acidic water button one time

daily to allow the water to ow through for the manual rinsing. (By selecting the acidic water button).

In places where the water hardness is high or compounds of calcium are abundant, there can be white

sedimentation inside the case, requiring additional purifying system to be used depending the level of the

sedimentation.

Caution

Do not use the following water, as problems may arise:

- Turbid and contaminated water

- Water with high concentration of red rust

Do not use any substance other than the designated glycerate calcium (electrolysis-stimulating)

calcium) or calcium sulte (chlorine-neutralized) in the calcium container unless obtained from

ionizers.

Turn off the water supply valve when replenishing the calcium otherwise, water leakage

may result.

Check for secure connetion of the calcium container cap, to avoid water leakage.

●Use tap water only.

- This machine is manufactured for drinking water based on standard tap water.

●Do not use the following water, as problems may arise:

•Turbid and contaminated water •Water with high hardness

•Very salty water •Water with high concentration of red rust

●Do not ll the calcium container with no other substances than the designated.

- Glycerin acid calcium (Electrolysis facilitating calcium) or calcium sulte

(Removal of chloride.)

●Should turn off the water pipe when ling the calcium.

- If not followed, water leakage can be caused.

●Check where the calcium container cap is surely fastened.

- If not fastened surely, water leaksge can be caused when the water ows through.

Precautions for using the product

7. Never use while sleeping or drowsy

8. Never drop or insert any object into any opening or hose.

9. Do not use outdoors or operate where aerosol (spray) products are being used

or where oxygen is being administered.

BTM-303D (영).indd 14 2016-08-31 오후 1:26:10

•Do not hold up the main case while holding the outlet exible pipe. (Cause for breakage)

•Do not operate the strong alkaline ionized water (level 5) continuously for a long period of time.

If you use the product in such manner, the system protective circuit (Temperature sensor) may be started,

depending on the quality of water, and the electrolysis can be suspended.

When using the product in a place where the water hardness is high.

•Before using the water initially daily, push the acidic water button to allow the acidic water to ow

through for about 1 minute.

•In case of tap water, in places where the water is used a lot. You need to push the acidic water button one time

daily to allow the water to ow through for the manual rinsing. (By selecting the acidic water button).

In places where the water hardness is high or compounds of calcium are abundant, there can be white

sedimentation inside the case, requiring additional purifying system to be used depending the level of the

sedimentation.

●Use tap water only.

- This machine is manufactured for drinking water based on standard tap water.

●Do not use the following water, as problems may arise:

•Turbid and contaminated water •Water with high hardness

•Very salty water •Water with high concentration of red rust

●Do not ll the calcium container with no other substances than the designated.

- Glycerin acid calcium (Electrolysis facilitating calcium) or calcium sulte

(Removal of chloride.)

●Should turn off the water pipe when ling the calcium.

- If not followed, water leakage can be caused.

●Check where the calcium container cap is surely fastened.

- If not fastened surely, water leaksge can be caused when the water ows through.

Use the product appropriately for each purpose

pH level selection Indicated

pH value instructed

10.0 ±0.5

Alkaline 4

Alkaline 3

Alkaline 2

Alkaline 1

Puried

Acidic

•When infusing vegetables to remove their bitter taste

•When washing vegetables

•Use it for drinking after consulting the doctor

•Recommendable for medical and culinary usage

•Recommendable for drinking and cooking

•Recommendable for daily drinking

•Recommendable for initial drinking or dissolving

powdered milk

•For washing dishes

•Strong acidic sanitary or rinsing water can come

out when the water volume is adjusted

•Rinsing with Acidic water to eliminating Viruses Bacilli

The pH value instructed is acquired by taking into consideration the source water based on Seoul, Korea

(Concentration of pH 7.0 ± 0.5, the water ow standard of 1.5ℓ/m (±0.5ℓ).

The pH values of the alkaline and acidic ionized water may not fall into the range of the pH value

instructed of the table above depending on the water quality and water ow volume.

9.5 ±1.0

9.0±1.0

8.5±1.0

3.5+1.0

▲

High

Alkalinity

Low

Acidity

High

▼

Caution - Usage of the product

● Do not use ammable materials like benzene or sprays for the product.

- Malfunctioning can be caused.

● Sufcient attention needs to be paid when a child of young age uses the product.

● Run tap water for 10 to 15 seconds prior to initial ionizer use each day.

● If ionizer is not used for several days, run water for at least 30 seconds prior to use.

● Contact the sales shop or the main ofce for advice when the generated water smells.

● Do not drop the product or apply strong impact to it.

- Dropping or impact can cause malfunctioning.

● Do not block the water outlet. If blocked, water leakage or malfunctioning can be caused.

● Should place the outlet hose (Acidic water outlet) below the main case.

● Do not use the water which is above 30°C (86°F) If not followed, malfunctioning can be

caused.

BTM-303D (영).indd 15 2016-08-31 오후 1:26:10

Should keep the water ow volume at an appropriate level in

order to prevent the alkaline ionized water from being

generated with difference in the pH value compared with

the set pH value due to the difference in the water ow volume.

Do not use the product in a place, like a bathroom, where

temperature or humidity is high.

Use the product in a place where there is no slope.

Directions for Storage and Maintenance After Use

Turn off the power before moving the product

Do not let water come inside the main body.

Do not block the outlet nozzle or the drainage hose arbitrarily. Do not bend or twist the hose arbitrarily.

Turn off the source water supply valve when the system will not be used for a long period of time.

Disconnect the electric cord from the wall socket when the system will not be used for a long period of time.

Clean the surface of the main body with soft cloth soaked with soap water.

1. How to store and manage the product after using it.

2. Precautions for using it.

(1) Precautions to be taken when using the ionizer.

(2) Pay attention to the following items regarding the

use environment and conditions.

Cap

Non-woven fabric

UF Membrane Filter

General activated

carbon

Water Outlet

General activated carbon

Calcium sulte

Remarks

Place of origin

Korea

Classication

UF Membrane Filter Special Fiber Pad

Non-woven fabric

●Pay attention to the following items when drinking the alkaline ionized water generated through the electrolysis.

Consult a doctor before drinking the strong alkaline water of level 5.

Those people with achlorhydria need to take the advice from a doctor for drinking the treated water

Do not use any type of water that can not meet the water quality requirements for the drinking water

The product is designed exclusively for the water of normal temperature, so warm water should not be used.

Do not drink the alkaline ionized water together with medicine.

Those people who just started using the water need to begin with small amount of nearly pH neutral water. They need

to consult a doctor for drinking the strong alkaline water.

Stop drinking the water and consult a doctor if you feel abnormality after drinking the water, or if there is no alleviation

of symptoms felt in the stomach even after continuously drinking the water.

Those people who currently go through medical treatment need to consult a doctor before drinking the water.

Those people with problems with the kidney, such as renal failure, calcium excretion failure, should not drink the water.

Those people who drink the alkaline ionized water need to check, once a month since after the initial drinking, whether the

pH value is still within the range for drinking, through utilizing a glass electrode type pH device or colorimetry before

they continue to drink the water.

Drink after the initial alkaline water ows through.

Avoid any metal container if possible and drink the water within a day while keeping it cold.

BTM-303D (영).indd 16 2016-08-31 오후 1:26:10

Operation indication panel Alkaline Level Buttons

Alkaline Level Buttons

Indication of operation

in progress

Indication of operation

in progress

Selecting Alkaline lonized Water

Selecting Acidic Ionized Water

1. Open the water supply control valve to let the water

ow in.

2. Use the pH button to select a stage.

- The value of selected pH stage is indicated.

- In case of"alkaline", any value between stage 1~4

will be indicated.

- When normally started, the system provides the

alkaine ionized water with previously set alkaline

value.

3.The product is ready to used.

Voice guidance:"Alkaline lonized Water on Process."

■ When the water supply control valve is turned off after

selecting and using "Strong""alkaline",the setting

will return to the previously set value of "Alkaline".

■ Do not use the product in the "Strong alkaline" state

for a long period of time.

The power can be turned off due to the operation of

the system protective circuit depending on the

quality of water.

■ Indication light for water inow.

When the tap water ows in, the water inow indication light indicates 'L' when the water

pressure is low and 'H' when it is high.You are required to adjust and keep the water pressure

to make the indication light stay at the center of "NORMAL".

When the indication light stays at the standard level, about 1.5l+ 0.5l/min.

of water will ow through.

When the acidity pH selection button for the operation is pushed, the acidic

ionized water will ow through the alkaline ionized water outlet.

1. Open the water supply control valve to let the water ow in.

2. Use the acidity pH selection button for selecting

(Melody comes out while the product is being used)

Voice guidance: "Acidic lonized Water on process."

3. When the water supply control valve is turned off in the middle of the

water being used, the setting will return to the previously set

value of 'Alkaline'. In order to stop the operation in the middle of the use,

other selection buttons need to be pushed to select other functions.

Producing lonized Water

BTM-303D (영).indd 17 2016-08-31 오후 1:26:11

Caution

● Acidic ionized water is not for drinking, so do not drink it.

● Use the water after letting the water ow through for about 5 seconds right after the generation

is initiated.

● Use the water initially daily after letting the water ow through for 10 ~ 15 seconds by opening

the water tap completely

● Use the water after letting the water ow through for more than 30 seconds when using the

product after not using it for a few days.

● Should not remove the purication lter when letting the water ow through the main case.

● Do not drink the acidic water.

Puried water indicating button

Indication of operation in progress

Indication of operation

in progress

1. Open the water supply control valve to let the water ow in to generate

the alkaline ionized water of the set value.

2. Push the puried water indicating button.

- Indication light for puried water selection

Voice guidanc "Crystal clear water on precess"

3. Use the puried water.

4.When the water supply control valve is turned off in the middle of

the water being used, the selection of the puried water is called

off and the setting will return to the previously set value of Alkaline .

In order to stop the operation in the middle of the use, other

selection buttons need to be pushed to select other functions.

■ When the indication light for the puried water is turned off.

When there is a change in the water pressure leading to the lowering

of the water level, the indication light will be turned off and the setting

will be returns to the previously set value of ‘Alkaline’. Use the

product by setting the value again after adjusting the water pressure.

Automatic Self-Cleaning inside the main body will be performed in the following cases in order for the cleaning of the

electrolysis bath and sustaining of water generation function.

■Do not let the water ow through while the rinsing is progressed .

(Err 7 will be indicated if the water is allowed to ow through)

■ When the rinsing is in progress, the indication light will be blinking

and the melody will be heard.

The rinsing process will be repeated until the Self-Cleaning is

completed if the water is allowed to ow through while the rinsing

is progressed.

■ Even when there is more than 10ℓ of water owing through, the automatic

rinsing will not be performed if an operation is in progress. The automatic

rinsing will be performed when the water stops owing through.

Please take note

- There can be ‘water dripping’ from the outlet pipe in the middle of the rinsing process,

which is not an abnormal situation.

- The operation will stop automatically when the indication light for the rinsing is turned off after the rinsing is nished.

Voice guidance:“ Self Cleaning.”

Selecting Puried Water

Self Cleaning

When the water ow volume of the

alkaline or acidic ionized water

reaches about 10ℓ.

Rinsing will be performed for about

30 seconds after the water supply

control valve is turned off.

When the water supply control valve is

opened after the rinsing, about 0.2ℓ of

water will be drained.

BTM-303D (영).indd 18 2016-08-31 오후 1:26:12

The pH values (Ion concentration) of the generated alkaline or acidic ionized water can be measured.

■ Check the generated water after adjusting the water pressure to meet the standard water ow volume (1.5

+ 0.5

/Min.)

according to the ionized water generation method.

(The pH values can vary depending on the quality of water and the ow volume)

■ Materials to be prepared: The pH Reagent - parts

■ How to measure

1. Let the generated water (Alkaline or Acidic ionized water) ow through for about 10 seconds.

2. After lling a transparent glass with 1/3 of the water, put 2~3 drops of the pH reagent into the water and shake it.

3. Compare it with the pH colorimetry.

Please take note

■ The color of the test solution will change as time goes by. (Compare the color of the test solution with the pH colorimetry

before too much time passes by after dropping the test solution into the water)

■ When disposing of the undiluted test solution, you need mix it with water to make it light before letting it ow out.

■ When the pH concentration is measured, the color of the test solution can come out differently compared with the pH

colorimetry due to the effect of various substances dissolved in the water such as carbonic acid gas.

■ The pH color of the alkaline or acidic ionized varies depending on the pH level.

Caution

● Do not let the pH regent contact the eyes and do not drink it.

- In case of drinking it by mistake, you need to drink lots of water. In case of the test solution contacting

the eyes, you need to clean your eyes with sufcient water and then consult a doctor.

● Do not place it near any heat of re. If not followed, re can be caused.

● Do not store the regent in a place where it can be reached easily be children. Avoid any place where

the temperature or moisture level is high

pH (ion concentration) Measurement

Indication light for water draining

Filter Replacement Period

Indication for lter replacement

The pH test solution is an expendable item. It can be purchased at the sales shop or the main ofce.