Biostar B760MZ-E PRO User manual

FCC Informaon and Copyright
This equipment has been tested and found to comply with the limits of a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protecon
against harmful interference in a residenal installaon. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instrucons,
may cause harmful interference to radio communicaons. There is no guarantee that interference
will not occur in a parcular installaon.
The vendor makes no representaons or warranes with respect to the contents here and
specially disclaims any implied warranes of merchantability or tness for any purpose. Further
the vendor reserves the right to revise this publicaon and to make changes to the contents here
without obligaon to nofy any party beforehand.
Duplicaon of this publicaon, in part or in whole, is not allowed without rst obtaining the
vendor’s approval in wring.
The content of this user’s manual is subject to be changed without noce and we will not be
responsible for any mistakes found in this user’s manual. All the brand and product names are
trademarks of their respecve companies.
Dichiarazione di conformità sinteca
Ai sensi dell’art. 2 comma 3 del D.M. 275 del
30/10/2002
Si dichiara che questo prodoo è conforme
alle normave vigen e soddisfa i requisi
essenziali richies dalle direve
2004/108/CE, 2006/95/CE e 1999/05/CE
quando ad esso applicabili
Short Declaraon of conformity
We declare this product is complying with the
laws in force and meeng all the essenal
requirements as specied by the direcves
2004/108/CE, 2006/95/CE and 1999/05/CE
whenever these laws may be applied
The terms HDMI and HDMI High-Denion Mulmedia Interface, and the HDMI Logo are trademarks or
registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.

2 | Table Of Contents
Table Of Contents
FCC Informaon and Copyright ������������������������������������������������������������������������������� 1
Chapter 1: Introducon������������������������������������������������������������������������������������������� 3
1.1 Before You Start.................................................................................................................. 3
1.2 Package Checklist................................................................................................................ 3
1.3 Specicaons...................................................................................................................... 4
1.4 Rear Panel Connectors........................................................................................................ 6
1.5 Motherboard Layout .......................................................................................................... 8
Chapter 2: Hardware installaon��������������������������������������������������������������������������� 12
2.1 Install Central Processing Unit (CPU) ................................................................................ 12
2.2 Install a Heatsink............................................................................................................... 14
2.3 Connect Cooling Fans ....................................................................................................... 15
2.4 Install System Memory ..................................................................................................... 16
2.5 Expansion Slots ................................................................................................................. 17
2.6 Jumper & Switch Seng................................................................................................... 20
2.7 Headers & Connectors...................................................................................................... 21
2.8 LEDs .................................................................................................................................. 26
Chapter 3: UEFI BIOS & Soware��������������������������������������������������������������������������� 27
3.1 UEFI BIOS Setup................................................................................................................ 27
3.2 BIOS Update...................................................................................................................... 27
3.3 Soware............................................................................................................................ 32
Chapter 4: Useful help������������������������������������������������������������������������������������������� 35
4.1 Driver Installaon ............................................................................................................. 35
4.2 AMI BIOS Beep Code......................................................................................................... 36
4.3 AMI BIOS post code .......................................................................................................... 36
4.4 Troubleshoong................................................................................................................ 38
APPENDIX I: Specicaons in Other Languages ����������������������������������������������������� 39
Arabic...................................................................................................................................... 39
German................................................................................................................................... 41
Spanish ................................................................................................................................... 43
Thai ........................................................................................................................................ 45
Japan....................................................................................................................................... 47

Chapter 1: Introducon | 3
B760MZ-E PRO | B760MX-E PRO | B760MH-E PRO | B760MP-E PRO
Chapter 1: Introducon
1�1 Before You Start
Thank you for choosing our product. Before you start installing the motherboard, please make
sure you follow the instrucons below:
• Prepare a dry and stable working environment with sucient lighng.
• Always disconnect the computer from power outlet before operaon.
• Before you take the motherboard out from an-stac bag, ground yourself properly
by touching any safely grounded appliance, or use grounded wrist strap to remove the
stac charge.
• Avoid touching the components on motherboard or the rear side of the board unless
necessary. Hold the board on the edge, do not try to bend or ex the board.
• Do not leave any unfastened small parts inside the case aer installaon. Loose parts
will cause short circuits which may damage the equipment.
• Keep the computer from dangerous area, such as heat source, humid air and water.
• The operang temperatures of the computer should be 0 to 45 degrees Celsius.
• To avoid injury, be careful of:
Sharp pins on headers and connectors
Rough edges and sharp corners on the chassis
Damage to wires that could cause a short circuit
1.2 Package Checklist
• Serial ATA Cable x2
• Rear I/O Panel for ATX Case x1
• WIFI antenna accessories x1
• Quick Installaon Guide x1
• Fully Setup Driver DVD x1
• M.2 Anchor x1
Note
»
»The package contents may be dierent due to the sales region or models in which it was sold. For
more informaon about the standard package in your region, please contact your dealer or sales
representave.

4 | Chapter 1: Introducon
1�3 Specifications
Specicaons
CPU Support
Support for 12th / 13th Generaon Intel® Core™ i9/ i7/ i5/ i3 processors and Intel® Penum® processors/
Intel® Celeron® processors in the LGA1700 package
* Please refer to www.biostar.com.tw for CPU support list.
Chipset Intel® B760
Memory
Supports Dual Channel DDR5 - 6000+(OC) / 6000(OC) /5800(OC) / 5600(OC)/ 5400(OC)/
5200(OC)/ 5000(OC)/ 4800
4x DDR5 DIMM Memory Slot, Max. Supports up to 128 GB Memory
Each DIMM supports non-ECC 8/16/32GB DDR5 module
Support Intel® Extreme Memory Prole (XMP) memory modules
* Please refer to www.biostar.com.tw for Memory support list.
Storage
-- Total supports 2x M.2 socket and 4x SATA III (6Gb/s) ports
4x SATA III Connector (6Gb/s) : Supports AHCI, RAID 0, 1, 5, 10 & Intel® Rapid Storage Technology
1x M.2 (M Key) Socket (M2M_CPU):
Supports M.2 Type 2280 SSD module
Supports PCI-E 4.0 x4 (64Gb/s) - NVMe SSD
1x M.2 (M Key) Socket (M2M_SB):
Supports M.2 Type 2242/2260/2280 SSD module
Supports PCI-E 4.0 x4 (64Gb/s) - NVMe SSD
RAID Supports RAID 0, 1, 5,10 for SATA storage devices
LAN Realtek RTL8125B
10/ 100/ 1000/ 2500 Mb/s auto negoaon, Half / Full duplex capability
Audio Codec ALC897
7.1 Channels, High Denion Audio, Hi-Fi(Front)
USB
1x USB 3.2 (Gen2) Type-C port (1 via internal header)
5x USB 3.2 (Gen1) port (3 on rear I/Os and 2 via internal header)
6x USB 2.0 port (2 on rear I/Os and 4 via internal header)
Expansion Slots
1x PCIe 4.0 x16 Slot (x16 mode)
1x PCIe 3.0 x16 Slot (x4 mode)
1x PCIe 3.0 x1 Slot
Rear I/Os
B760MZ-E PRO
2x WIFI Antenna Port
1x PS/2 Keyboard/ Mouse Port
1x HDMI
1x DP
1x VGA
1x DVI Port
3x USB 3.2 (Gen1) Port
2x USB 2.0 port
1x LAN port
3x Audio Jack
B760MX-E PRO
2x WIFI Antenna Port
1x PS/2 Keyboard/ Mouse Port
1x HDMI
1x VGA Port
1x DVI Port
3x USB 3.2 (Gen1) Port
2x USB 2.0 port
1x LAN port
3x Audio Jack
B760MH-E PRO
2x WIFI Antenna Port
1x PS/2 Keyboard/ Mouse Port
1x HDMI
1x VGA Port
3x USB 3.2 (Gen1) Port
2x USB 2.0 port
1x LAN port
3x Audio Jack
B760MP-E PRO
2x WIFI Antenna Port
1x PS/2 Keyboard/ Mouse Port
1x DP
1x HDMI
1x DVI Port
3x USB 3.2 (Gen1) Port
2x USB 2.0 port
1x LAN port
3x Audio Jack

Chapter 1: Introducon | 5
B760MZ-E PRO | B760MX-E PRO | B760MH-E PRO | B760MP-E PRO
Specicaons
Internal I/Os
4x SATA III Connector (6Gb/s)
1x M.2 (E Key) Socket : Supports 2230 type Wi-Fi & Bluetooth module and Intel® CNVi
2x USB 2.0 Header (each header supports 2 USB 2.0 ports)
1x USB 3.2 (Gen1) Header (each header supports 2 USB 3.2 (Gen1) ports)
1x USB 3.2 (Gen2) Type-C Header (each header supports 1 USB 3.2 (Gen2) ports)
1x 8-Pin Power Connector
1x 24-Pin Power Connector
1x CPU Fan Connector
1x CPU water cooling connector (CPU_OPT)
1x System Fan Connector
1x Front Panel Header
1x Front Audio Header
1x Internal Stereo Speaker Header
1x Clear CMOS Header
1x COM Port Header
1x TPM Header
2x LED Header (5V)
1x LED Header (12V)
* M.2 (E key) Wi-Fi card is not provided
Form Factor uATX Form Factor, 244 mm x 244 mm
OS Support Windows 10(64bit) / Windows 11(64bit)
* Biostar reserves the right to add or remove support for any OS with or without noce.

6 | Chapter 1: Introducon
1.4 Rear Panel Connectors
B760MZ-E PRO
B760MX-E PRO

Chapter 1: Introducon | 7
B760MZ-E PRO | B760MX-E PRO | B760MH-E PRO | B760MP-E PRO
B760MH-E PRO
B760MP-E PRO
Note
»
»VGA/ HDMI/ DVI/ DP ports only work with an Intel® integrated Graphics Processor.
»
»Maximum resoluon
HDMI: 4096 x 2160 @30Hz
VGA: 1920 x 1200 @60Hz
DVI: 1920 x 1200 @60Hz
DP: 1920 x 1200 @60Hz
»
»The mainboard supports three onboard display outputs at same me and the display output
conguraon can be selected in Intel graphics driver ulity.
»
»When using the front HD audio jack and plug in the headset / microphone , the rear sound will be
automacally Disabled.
»
»The WiFi antenna port allows you to connect to the E KEY module and use the WiFi & Bluetooth
funcon.

8 | Chapter 1: Introducon
1.5 Motherboard Layout
B760MZ-E PRO
Note
»
» represents the 1st pin.

Chapter 1: Introducon | 9
B760MZ-E PRO | B760MX-E PRO | B760MH-E PRO | B760MP-E PRO
B760MX-E PRO
Note
»
» represents the 1st pin.

10 | Chapter 1: Introducon
B760MH-E PRO
Note
»
» represents the 1st pin.

Chapter 1: Introducon | 11
B760MZ-E PRO | B760MX-E PRO | B760MH-E PRO | B760MP-E PRO
B760MP-E PRO
Note
»
» represents the 1st pin.

12 | Chapter 2: Hardware installaon
Chapter 2: Hardware installaon
2.1 Install Central Processing Unit (CPU)
Step 1: Locate the CPU socket on the motherboard
Note
»
»Remove pin cap before installaon, and make good preservaon for future use. When the CPU is
removed, cover the pin cap on the empty socket to ensure pin legs won’t be damaged.
»
»The motherboard might equip with two dierent types of pin cap. Please refer below instrucon to
remove the pin cap.
Step 2: Open ILM Lever and then load plate using nger tab.
Step 3: Align and seat processor package on socket.

Chapter 2: Hardware installaon | 13
B760MZ-E PRO | B760MX-E PRO | B760MH-E PRO | B760MP-E PRO
Step 4: Close the load plate.
Step 5: Remove and save cover.
Step 6: Close ILM Lever and latch
Note
»
»Ensure that you install the correct CPU designed for LGA1700 socket.
»
»The CPU ts only in one correct orientaon. Do not force the CPU into the socket to prevent
damaging the CPU.

14 | Chapter 2: Hardware installaon
2.2 Install a Heatsink
Step 1: Place the CPU fan assembly on top of the installed CPU and make sure that the four
fasteners match the motherboard holes. Orient the assembly and make the fan cable is closest
to the CPU fan connector.
Step 2: Press down two fasteners at one me in a diagonal sequence to secure the CPU fan
assembly in place. As each fastener locks into posion a click should be heard.
Note
»
»Apply the thermal interface material on the CPU before heatsink installaon, if necessary.
»
»Do not forget to connect the CPU fan connector.
»
»For proper installaon, please kindly refer to the installaon manual of your CPU heatsink.

Chapter 2: Hardware installaon | 15
B760MZ-E PRO | B760MX-E PRO | B760MH-E PRO | B760MP-E PRO
2.3 Connect Cooling Fans
These fan headers support cooling-fans built in the computer. The fan cable and connector
may be dierent according to the fan manufacturer.
CPU_FAN/ CPU_OPT: CPU Fan Header
Pin Assignment
1 Ground
2 +12V
3FAN RPM rate sense
4 AI Fan Control
SYS_FAN: System Fan Header
Pin Assignment
1 Ground
2 +12V
3FAN RPM rate sense
4 AI Fan Control
Note
»
»CPU_FAN, CPU_OPT, SYS_FAN support 4-pin and 3-pin head connectors. When connecng with
wires onto connectors, please note that the red wire is the posive and should be connected to
pin#2, and the black wire is Ground and should be connected to pin#1(GND).
»
»CPU Fan Header (CPU_OPT): Support water cooling fan and CPU fan.

16 | Chapter 2: Hardware installaon
2.4 Install System Memory
DDR5 Modules
Step 1: Unlock a DIMM slot by pressing the retaining clips outward. Align a DIMM on the slot
such that the notch on the DIMM matches the break on the slot.
Step 2: Insert the DIMM vercally and rmly into the slot unl the retaining clips snap back in
place and the DIMM is properly seated.
Note
»
»If the DIMM does not go in smoothly, do not force it. Pull it all the way out and try again.

Chapter 2: Hardware installaon | 17
B760MZ-E PRO | B760MX-E PRO | B760MH-E PRO | B760MP-E PRO
Memory Capacity
DIMM Socket Locaon DDR5 Module Total Memory Size
DDR5_A1 8GB/16GB/32GB
Max is 128GB.
DDR5_A2 8GB/16GB/32GB
DDR5_B1 8GB/16GB/32GB
DDR5_B2 8GB/16GB/32GB
Dual Channel Memory Installaon
Please refer to the following requirements to acvate Dual Channel funcon:
Install memory module of the same density in pairs, shown in the table.
Dual Channel Status DDR5_A1 DDR5_A2 DDR5_B1 DDR5_B2
Enabled X O X O
Enabled O O O O
(O means memory installed, X means memory not installed.)
Note
»
»When installing more than one memory module, we recommend to use the same brand and
capacity memory on this motherboard.
2.5 Expansion Slots
PCIEG4X16: PCI-Express Gen4 x16 Slots (x16 mode)
• PCI-Express 4.0 compliant.
• The maximum bandwidth of the PCIe slot is 64GB/s.
PCIEG3X4: PCI-Express Gen3 x16 Slots (x4 mode)
• PCI-Express 3.0 compliant.
• The maximum bandwidth of the PCIe slot is 4GB/s.
PCIEG3X1: PCI-Express Gen3 x1 Slots
• PCI-Express 3.0 compliant.
• Data transfer bandwidth up to 1GB/s per direcon; 2GB/s in total

18 | Chapter 2: Hardware installaon
M2M_CPU: M.2 (M Key) Socket
• The M.2 slot supports M.2 Type 2280 SSD module. When installing M.2 SSD module,
please place the M.2 Anchor to correct posion.
• Supports M.2 PCI Express module up to Gen4x4 (64Gb/s) - NVMe SSD.
M2M_SB: M.2 (M Key) Socket
• The M.2 slot supports M.2 Type 2242/ 2260/ 2280 SSD module. When installing M.2 SSD
module, please place the M.2 Anchor to correct posion.
• Supports M.2 PCI Express module up to Gen4x4 (64Gb/s) - NVMe SSD
M2E_WIFI: M.2 (E Key) Socket (M.2 (E key) Wi-Fi card is not provided)
• Support M.2 socket 2230 type module.
• Supports WiFi/ Bluetooth module and Intel® CNVi (Integrated WiFi/ BT).

Chapter 2: Hardware installaon | 19
B760MZ-E PRO | B760MX-E PRO | B760MH-E PRO | B760MP-E PRO
Install M.2 Anchor
1. Lock the M.2 Anchor into the motherboard hole which you use for type of M.2 SSD.
2. Insert the M.2 SSD into the M.2 socket.
3. Insert the pin on the M.2 Anchor into the hole on itself.
Install an Expansion Card
You can install your expansion card by following steps:
• Read the related expansion card’s instrucon document before install the expansion
card into the computer.
• Remove your computer’s chassis cover, screws and slot bracket from the computer.
• Place a card in the expansion slot and press down on the card unl it is completely
seated in the slot.
• Secure the card’s metal bracket to the chassis back panel with a screw. (This step is only
for installing a VGA card.).
• Replace your computer’s chassis cover.
• Power on the computer, if necessary, change BIOS sengs for the expansion card.
• Install related driver for the expansion card.

20 | Chapter 2: Hardware installaon
2.6 Jumper & Switch Setting
The illustraon shows how to set up jumpers. When the jumper cap is placed on pins, the
jumper is “close”, if not, that means the jumper is “open”.
Pin opened Pin closed Pin 1-2 closed
JCMOS: Clear CMOS Jumper
The jumper allows users to restore the BIOS safe seng and the CMOS data. Please carefully
follow the procedures to avoid damaging the motherboard.
Pin 1-2 Open:
Normal Operaon (Default)
Pin 1-2 Short:
Clear CMOS data
Clear CMOS Procedures:
1. Remove AC power line.
2. Set the jumper to “Pin 1-2 short”, you can use a metal object like a screwdriver to touch the
two pins.
3. Wait for ve seconds.
4. Aer clearing the CMOS values, be sure the jumper is “Pin 1-2 open”.
5. Power on the AC.
6. Load Opmal Defaults and save sengs in CMOS.