Biostar M7VIW-D User manual

M
M
M7
7
7V
V
VI
I
IW
W
W-
-
-D
D
D
i
FCC Statement and Copyright
This equipment has been tested and found to comply with the limits of a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. There is no guarantee that
interference will not occur in a particular installation.
The vendor makes no representations or warranties with respect to the contents
here of and specially disclaims any implied warranties of merchantability or
fitness for any purpose. Further the vendor reserves the right to revise this
publication and to make changes to the contents here of without obligation to
notify any party beforehand.
Duplication of this publication, in part or in whole is not allowed without first
obtaining the vendor’s approval in writing.
The content of this user’s is subject to be changed without notice and we will not
be responsible for any mistakes found in this user’s manual. All the brand and
product names are trademarks of their respective companies.

C
C
Co
o
on
n
nt
t
te
e
en
n
nt
t
ts
s
s
ii
ENGLISH.....................................................................................................1
M7VIW-D Features ..........................................................................................................1
Package contents ...........................................................................................................2
Layout of M7VIW-D.........................................................................................................3
CPU Installation ..............................................................................................................4
DDR DIMM Modules: DDR1-2.........................................................................................5
Jumpers, Headers, Connectors & Slots ........................................................................6
ESPAÑOL..................................................................................................12
Características del M7VIW-D........................................................................................12
Contenidos del Paquete...............................................................................................13
Disposición del M7VIW-D.............................................................................................14
Instalación del CPU ......................................................................................................15
DDR DIMM Modules: DDR1-2.......................................................................................16
Conectores, Cabezales, Puentes y Ranuras...............................................................17
DEUTSCH..................................................................................................24
Merkmale des M7VIW-D................................................................................................24
Verpackungsinhalt........................................................................................................25
Layout des M7VIW-D ....................................................................................................26
Installation der CPU......................................................................................................27
DDR-DIMM-Modules: DDR1-2.......................................................................................28
Jumpers, Headers, Connectors & Slots ......................................................................29
WARPSPEEDER.......................................................................................35
Introduction...................................................................................................................35
System Requirement....................................................................................................35
Installation.....................................................................................................................36
Usage.............................................................................................................................37
TROUBLE SHOOTING .............................................................................46
SOLUCIÓN DE PROBLEMAS..................................................................47
PROBLEMLÖSUNG..................................................................................48

M
M
Mo
o
ot
t
th
h
he
e
er
r
rb
b
bo
o
oa
a
ar
r
rd
d
d
D D
De
e
es
s
sc
c
cr
r
ri
iip p
pt
t
ti
iio o
on
n
n
1
English
M7VIW-D Features
CPU
- Supports single Socket-A for an AMD® Athlon/ Duron Family processor.
- Running at 200/ 266 MHz Front Side Bus.
Chipset
- North Bridge: VIA KT266A.
- South Bridge: VT8235.
Main Memory
- Supports up to 2 DDR devices.
- Supports 200/ 266 MHz (without ECC) DDR devices.
- The largest memory capacity is 2GB.
Slots
- Five 32-bit PCI bus master slots.
- One CNR slot (Type B only).
- One AGP 4X slot.
On Board IDE
- Supports four IDE disk drives.
- Supports PIO Mode 4, Master Mode and Ultra DMA 33/66/100/133 Bus
Master Mode.
LAN Chip – VT6103 (Optional)
- Supports Half and Full Duplex.
- Supports dual speed- 100/ 10 Mbps.
- Auto Negotiation: 10/ 100, Full/ Half Duplex.
Audio
- AC97 2.2 compatible.
- PC99 complaint.
- Supports 2 speaker out channels.
On Board Peripherals
- Supports 360K, 720K, 1.2MB, 1.44MB and 2.88MB floppy disk drivers.
- Supports 2 serial ports.
- Supports 1 multi-mode parallel port. (SPP/EPP/ECP mode)
- Supports PS/2 mouse and PS/2 keyboard.
- Supports horizontal audio ports.
- Supports 1 game port.
- Supports 2 back USB2.0 ports and 4 front USB2.0 ports. (Optional)

M
M
Mo
o
ot
t
th
h
he
e
er
r
rb
b
bo
o
oa
a
ar
r
rd
d
d
D D
De
e
es
s
sc
c
cr
r
ri
iip p
pt
t
ti
iio o
on
n
n
2
BIOS
- AWARD legal Bios.
- Supports APM1.2.
- Supports ACPI.
- Supports USB Function.
Operating System
- Offers the highest performance for Windows NT, Window 98SE, Windows
2000, Windows Me, Windows XP and LINUX.
Dimensions
- ATX Form Factor: 20cm X 30.5cm (W X L).
Package contents
- HDD Cable X 1
- FDD Cable X 1
- Fully Setup Driver CD X 1
- User’s Manual X 1
- USB Cable X 2 (Optional)
- Rear I/O Panel for ATX Case X 1 (Optional)
- SPDIF Out Cable X1 (Optional)

M
M
Mo
o
ot
t
th
h
he
e
er
r
rb
b
bo
o
oa
a
ar
r
rd
d
d
D D
De
e
es
s
sc
c
cr
r
ri
iip p
pt
t
ti
iio o
on
n
n
3
Layout of M7VIW-D
CPU
Socket A
KT266A
VT8235
JATXPWR1
JKBV1
1
JUSBV1
1
AGPSLOT
PCI1
PCI2
PCI SLOT
PCI SLOT
PCI3
PCI4
PCI5
PCI SLOT
PCI SLOT
PCI SLOT
CNR1
JWOL1
CNR SLOT
1
JAUDIO1
Codec
JPANEL1
JSFAN1
1
1
223 24
JUSB2
1
2
9
10
BAT1
JCMOS1
1
JUSBV2
1
GAME Port
SP-OUTMIC-IN LINE-IN
1
JUSB3
1
2
9
10
IDE1IDE2
FDD1
ITE I/O
1
1
JGAME1
BIOS
2
1413
1
LAN Chip
1
JCI1
1
1

M
M
Mo
o
ot
t
th
h
he
e
er
r
rb
b
bo
o
oa
a
ar
r
rd
d
d
D D
De
e
es
s
sc
c
cr
r
ri
iip p
pt
t
ti
iio o
on
n
n
4
CPU Installation
1. Pull the lever sideways away from the socket then raise the lever up to
90-degree angle.
2. Locate Pin A in the socket and lock for the white dot or cut edge in the CPU.
Match Pin A with the white dot/cut edge then insert the CPU.
3. Press the lever down. Then Put the fan on the CPU and buckle it and put the
fan’s power port into the JCFAN1, then to complete the installation.
CPU/ System Fan Headers: JCFAN1/ JSFAN1
CPU
JSFAN1
Ground
12V
Sense
1
JCFAN1
1Ground
12V
Sense

M
M
Mo
o
ot
t
th
h
he
e
er
r
rb
b
bo
o
oa
a
ar
r
rd
d
d
D D
De
e
es
s
sc
c
cr
r
ri
iip p
pt
t
ti
iio o
on
n
n
5
DDR DIMM Modules: DDR1-2
DRAM Access Time: 2.5V Unbuffered/ Registered DDR 200 MHz (PC1600)/
DDR 266 MHz (PC2100) Type required.
DRAM Type: 64MB/ 128MB/ 256MB/ 512MB/ 1GB DIMM Module (184 pin)
DIMM Socket
Location DDR Module Total Memory Size (MB)
DDR 1 64MB/128MB
/
256MB/512MB/1GB
*1
DDR 2 64MB/128MB/256MB/512MB/1GB
*1
Max is
2GB
 The list shown above for DRAM configuration is only for reference.
How to install a DIMM Module
DDR DIMM Module
1. The DIMM socket has a “ Plastic Safety
Tab”, and the DIMM memory module has
an “Asymmetrical notch”, so the DIMM
memory module can only fit into the slot in
one direction.
2. Push the tabs out. Insert the DIMM
memory modules into the socket at a
90-degree angle, then push down
vertically so that it will fit into the place.
3. The Mounting Holes and plastic tabs
should fit over the edge and hold the
DIMM memory modules in place.

M
M
Mo
o
ot
t
th
h
he
e
er
r
rb
b
bo
o
oa
a
ar
r
rd
d
d
D D
De
e
es
s
sc
c
cr
r
ri
iip p
pt
t
ti
iio o
on
n
n
6
Jumpers, Headers, Connectors & Slots
Hard Disk Connectors: IDE1/ IDE2
The motherboard has a 16-bit Enhanced IDE Controller that provides PIO Mode
0~4, Bus Master, and Ultra DMA 33/ 66/ 100/ 133 functionality. It has two HDD
connectors IDE1 (primary) and IDE2 (secondary).
The IDE connectors can connect a master and a slave drive, so you can connect
up to four hard disk drives. The first hard drive should always be connected to
IDE1.
Floppy Disk Connector: FDD1
The motherboard provides a standard floppy disk connector that supports 360K,
720K, 1.2M, 1.44M and 2.88M floppy disk types. This connector supports the
provided floppy drive ribbon cables.
Accelerated Graphics Port Slot: AGP1
Your monitor will attach directly to that video card. This motherboard supports
video cards for PCI slots, but it is also equipped with an Accelerated Graphics
Port (AGP). An AGP card will take advantage of AGP technology for improved
video efficiency and performance, especially with 3D graphics.
Communication Network Riser Slot: CNR1
The CNR specification is an open Industry Standard Architecture, and it defines a
hardware scalable riser card interface, which supports audio, network and
modem only.
Peripheral Component Interconnect Slots: PCI1-5
This motherboard is equipped with 5 standard PCI slots. PCI stands for
Peripheral Component Interconnect, and it is a bus standard for expansion cards,
which has, supplanted the older ISA bus standard in most ports. This PCI slot is
designated as 32 bits.
Power Connectors: JATXPWR1
JATXPWR1
(ATX Main Power Conn.)
JATXPWR1
(ATXPower Conn.)

M
M
Mo
o
ot
t
th
h
he
e
er
r
rb
b
bo
o
oa
a
ar
r
rd
d
d
D D
De
e
es
s
sc
c
cr
r
ri
iip p
pt
t
ti
iio o
on
n
n
7
Wake On LAN Header:
JWOL1
Front USB Header: JUSB2/3
5V/ 5VSB Selection for USB/KB: JUSBV1/JUSBV2/
JKBV1
Front Panel Connector:
JPANEL1
SPK
PWR_LED
HLED
SLP
RST
224
IR
123
IRON/OFF
SPK ==> Speaker Conn.
HLED ==> Hard Driver LED
RST ==> Reset Button
IR ==> Infrared Conn.
SLP ==> Sleep Button
PWR_LED ==> Power LED
ON/ OFF ==> Power-on Button
(+) (-)
(+) (-)(+)
JUSB2/ 3
2
1
Pin Assignment Pin Assignment
12
43
56
87
910
+5V +5V
Data (-)Data (-)
Data (+) Data (+)
Ground Ground
Key NA
1
JKBV1
Pin 1-2 on ==> 5V (For Normal Function)
Pin 2-3 on ==> 5V_SB (For S3 Wake-up Function)
1
JUSBV1/2
JWOL1
1
5V_SBWake up
Ground

M
M
Mo
o
ot
t
th
h
he
e
er
r
rb
b
bo
o
oa
a
ar
r
rd
d
d
D D
De
e
es
s
sc
c
cr
r
ri
iip p
pt
t
ti
iio o
on
n
n
8
CPU Clock Selection: JCLK1
Audio Subsystem: JAUDIO1/ JCDIN1/ JCDIN2
•JAUDIO1 with 14 pins only support Codec 6CH, CMI9739A/ 9760 (Optional)
12
JAUDIO1
(Front Audio Header)
1
1
JCDIN2
(CD-ROM Audio-In Header)
JCDIN1
(CD-ROM Audio-In Header)
2
JAUDIO1
1
213
14
Pin
1
3
5
7
9
11
13
Pin
2
4
6
8
10
12
14
Mic In
Mic Power
RT Line Out
Reserved
LFT Line Out
RT Line In
LFT Line In
Assignment Ground
Audio Power
RT Line Out
NC
RT Line In
LFT Line In
Assignment
LFT Line Out
1
JCLK1
Pin 1-2 ==> 133 MHz
(default)
Pin 2-3 ==> 100 Mhz

M
M
Mo
o
ot
t
th
h
he
e
er
r
rb
b
bo
o
oa
a
ar
r
rd
d
d
D D
De
e
es
s
sc
c
cr
r
ri
iip p
pt
t
ti
iio o
on
n
n
9
•JAUDIO1 with 10 pins only support Codec 2CH, VIA VT1612A (Optional)
12
Front Panel AudioConnector/ JumperBlock
910 Audio line out signals are routed
to the back panel audio line out connector.
Pin 5 and 6
Pin 9 and 10
Pin11 and 12
Pin13 and 14
Audio line out and mic in signals are
available for front panel audio connectors.
11 12
13 14
3
5
7
4
6
12
910
11 12
13 14
3
5
7
4
6No jumpers
installed
Jumper Setting Configuration
12
JAUDIO1
(Front Audio Header)
1
1
JCDIN2
(CD-ROM Audio-In Header)
JCDIN1
(CD-ROM Audio-In Header)

M
M
Mo
o
ot
t
th
h
he
e
er
r
rb
b
bo
o
oa
a
ar
r
rd
d
d
D D
De
e
es
s
sc
c
cr
r
ri
iip p
pt
t
ti
iio o
on
n
n
10
Digital Audio Connector: JSPDIF1
JSPDIF1
1GND
Pin Assignment
1
2
3
VCC5
SPDIF_OUT
2
JAUDIO1
1
29 10
Pin
1
3
5
7
9
Pin
2
4
6
8
10
Mic In
Mic Power
RT Line Out
Reserved
LFT Line Out
Assignment Ground
Audio Power
RT Line Out
NC
Assignment
LFT Line Out
12
Front Panel AudioConnector/ JumperBlock
910 Audio line out signals are routed
to the back panel audio line out connector.
Pin 5 and 6
Pin 9 and 10
Audio line out and mic in signals are
available for front panel audio connectors.
3
5
7
4
6
12
910
3
5
7
4
6No jumpers
installed
Jumper Setting Configuration

M
M
Mo
o
ot
t
th
h
he
e
er
r
rb
b
bo
o
oa
a
ar
r
rd
d
d
D D
De
e
es
s
sc
c
cr
r
ri
iip p
pt
t
ti
iio o
on
n
n
11
Clear CMOS Jumper: JCMOS1
Case Open Connector: JCI1
Back Panel Connectors
PS/2
Keyboard
PS/2
Mouse
COM1
Parallel Game Port
JPRNT1 JGAME1
JCOM1
JKBMS1
USB
LAN(Optional)
JUSBLAN1
Speaker
Out Line In Mic In
COM2
JCOM2
JCMOS1
Clear CMOS
Data
Pin 1-2 on
Normal
Operation
(default)
Assignment
1
Pin 2-3 on
1
JCI1
Case Open
No jumper
installed
Normal
Operation
(default)
Assignment
1
Pin 1-2 on
1

M
M
Mo
o
ot
t
th
h
he
e
er
r
rb
b
bo
o
oa
a
ar
r
rd
d
d
D D
De
e
es
s
sc
c
cr
r
ri
iip p
pt
t
ti
iio o
on
n
n
12
Español
Características del M7VIW-D
CPU
- Soporta familia de procesadores single Socket-A para AMD® Athlon/ Duron.
- Corriendo a 200/ 266 MHz Front Side Bus.
Chipset
- North Bridge: VIA KT266A.
- South Bridge: VT8235.
Memoria Principal
- Soporta hasta 2 dispositivos DDR.
- Soporta dispositivos DDR 200/ 266 MHz (sin ECC).
- Capacidad máxima de memoria 2GB.
Ranuras
- Cinco ranuras PCI bus master de 32-bit.
- Una ranura CNR (solamente Tipo B).
- Una ranura AGP 4X.
IDE Onboard
- Soporta cuatro discos duros IDE.
- Soporta Modo PIO 4, Modo Master y Ultra DMA 33/66/100/133 Bus Mode
Master.
LAN Chip – VT6103 (Opcional)
- Soporta Half and Full Duplex.
- Soporta dual speed- 100/ 10 Mbps.
- Auto Negociación: 10/ 100, Full/ Half Duplex.
Audio
- AC97 2.2 compatible.
- PC99 compatible.
- Soporta 2 canales de salida del altavoz.
Periféricos Onboard
- Soporta disquetera de 360K, 720K, 1.2MB, 1.44MB y 2.88MB.
- Soporta 2 puertos serie.
- Soporta 1 puerto paralelo multi-mode. (modo SPP/EPP/ECP)
- Soporta ratón PS/2 y teclado PS/2.
- Soporta puertos de audio horizontal.
- Soporta 1 puerto de juego.
- Soporta 2 puertos USB2.0 traseros y 4 puertos USB2.0 frontales.
(Opcional)

M
M
Mo
o
ot
t
th
h
he
e
er
r
rb
b
bo
o
oa
a
ar
r
rd
d
d
D D
De
e
es
s
sc
c
cr
r
ri
iip p
pt
t
ti
iio o
on
n
n
13
BIOS
- AWARD legal Bios.
- Soporta APM1.2.
- Soporta ACPI.
- Soporta función USB.
Sistemas Operativos
- Ofrece el más alto funcionamiento para Windows NT, Window 98SE,
Windows 2000, Windows Me, Windows XP y LINUX.
Dimensiones
- Forma de Factor ATX: 20cm X 30.5cm (W X L).
Contenidos del Paquete
- Cable HDD X 1
- Cable FDD X 1
- Completa Configuración del Driver CD X 1
- Manual del Usuario X 1
- Cable USB X 2 (Opcional)
- Panel Trasero I/O para carcasa ATX X 1 (Opcional)
- Cable SPDIF Out X1 (Opcional)

M
M
Mo
o
ot
t
th
h
he
e
er
r
rb
b
bo
o
oa
a
ar
r
rd
d
d
D D
De
e
es
s
sc
c
cr
r
ri
iip p
pt
t
ti
iio o
on
n
n
14
Disposición del M7VIW-D
CPU
Socket A
KT266A
VT8235
JATXPWR1
JKBV1
1
JUSBV1
1
PCI1
PCI2
PCI3
PCI4
PCI5
CNR1
JWOL1
1
JAUDIO1
Codec
JPANEL1
JSFAN1
1
1
223 24
JUSB2
1
2
9
10
BAT1
JCMOS1
1
JUSBV2
1
Puerto de Juego
Salida del Altavoz
Entrada del MIC Entrada
de Linea
1
JUSB3
1
2
9
10
IDE1IDE2
FDD1
ITE I/O
1
1
JGAME1
BIOS
2
1413
1
LAN Chip
1
JCI1
1
1

M
M
Mo
o
ot
t
th
h
he
e
er
r
rb
b
bo
o
oa
a
ar
r
rd
d
d
D D
De
e
es
s
sc
c
cr
r
ri
iip p
pt
t
ti
iio o
on
n
n
15
Instalación del CPU
1. Tire de la palanca del lado del zócalo, luego levante la palanca hasta un
ángulo de 90 grados.
2. Sitúe el contacto A del zócalo y busque el punto blanco o corte el borde en la
CPU. Empareje el contacto A con el punto blanco/ corte del borde, luego
inserte la CPU.
3. Presione la palanca para abajo. Ponga el ventilador en la CPU y abróchelo.
Luego ponga el puerto de corriente del ventilador en el JCFAN1. Y ya
habrá completado su instalación.
CPU/ Cabezal del Sistema de Ventilación: JCFAN1/ JSFAN1
CPU
JSFAN1
Tierra
12V
Sense
1
JCFAN1
1Tierra
12V
Sense

M
M
Mo
o
ot
t
th
h
he
e
er
r
rb
b
bo
o
oa
a
ar
r
rd
d
d
D D
De
e
es
s
sc
c
cr
r
ri
iip p
pt
t
ti
iio o
on
n
n
16
DDR DIMM Modules: DDR1-2
DRAM Tiempo de Acceso: 2.5V Unbuffered/ Registered DDR 200 MHz
(PC1600)/ DDR 266 MHz (PC2100) Tipo requerido.
DRAM Tipo: 64MB/ 128MB/ 256MB/ 512MB/ 1GB Módulo DIMM (184 contactos)
Localización
del Socket
DIMM
Módulo DDR Total del
Tamaño de
Memoria (MB)
DDR 1 64MB/128MB/256MB/512MB/1GB
*1
DDR 2 64MB/128MB/256MB/512MB/1GB
*1
Máxima 2GB
 La lista de arriba para la configuración DRAM es solamente para
referencia.
Cómo instalar un módulo DIMM
Módulo DDR DIMM
1. El zócalo DIMM tiene una lengüeta
plástica de seguridad y el módulo de
memoria DIMM tiene una muesca
asimétrica, así el módulo de memoria
DIMM puede caber solamente en la ranura
de una sóla dirección.
2. Tire la lengüeta hacia afuera. Inserte
los módulos de memoria DIMM en el
zócalo a los 90 grados, luego empuje
hacia abajo verticalmente de modo que
encaje en el lugar.
3. Los agujeros de montaje y las lengüetas
plásticas deben caber por sobre el borde y
sostenga los módulos de memoria DIMM
en el lugar.

M
M
Mo
o
ot
t
th
h
he
e
er
r
rb
b
bo
o
oa
a
ar
r
rd
d
d
D D
De
e
es
s
sc
c
cr
r
ri
iip p
pt
t
ti
iio o
on
n
n
17
Conectores, Cabezales, Puentes y Ranuras
Conectores del Disco Duro: IDE1/ IDE2
La placa madre tiene un controlador de 32-bit PCI IDE que proporciona Modo
PIO 0~4, Bus Master, y funcionalidad Ultra DMA 33/ 66/ 100/ 133. Tiene dos
conectores HDD IDE1 (primario) y IDE2 (secundario).
El conector IDE puede conectar a un master y un drive esclavo, así puede
conectar hasta cuatro discos rígidos. El primer disco duro debe estar siempre
conectado al IDE1.
Conector para el Disquete: FDD1
La placa madre proporciona un conector estándar del disquete (FDC) que
soporta 360K, 720K, 1.2M, 1.44M y 2.88M tipos de disquete. Éste conector utiliza
los cables de cinta proporcionados por el disquete.
Ranura del Puerto Acelerado para Gráficos: AGP1
Su monitor se fijará directamente a la tarjeta de video. Ésta placa madre
soporta tarjetas de video para PCI, pero también está equipada con puerto AGP.
La tarjeta AGP tomará ventaja de la tecnología del AGP para el mejoramiento de
la eficiencia y funcionamiento del video, especialmente con gráficos 3D.
Ranura de Banda de Suspensión de Comunicación y Red:
CNR1
La especificación CNR es una abierta Industria de Arquitectura Estándar, que
define una tarjeta de interface escalable del hardware en el que soporta audio y
modem.
Ranura de Interconexión del Componente Periférico: PCI1-5
Ésta placa madre está equipada con 5 ranuras estándar PCI. PCI es la sigla para
Interconexión del Componente Periférico, y es un bus estándar para tarjetas de
expansión en el que suplanta a la antigua bus estándar ISA, en su mayoría de
las partes. Ésta ranura PCI está diseñado con 32 bits.
Conector de Corriente: JATXPWR1
JATXPWR1
(Conector de
Corriente ATX)

M
M
Mo
o
ot
t
th
h
he
e
er
r
rb
b
bo
o
oa
a
ar
r
rd
d
d
D D
De
e
es
s
sc
c
cr
r
ri
iip p
pt
t
ti
iio o
on
n
n
18
Cabezal Wake On LAN: JWOL1
Cabezal Frontal USB: JUSB2/3
5V/ 5VSB Selección para USB/KB: JUSBV1/JUSBV2/
JKBV1
WOL1
1
5V_SBWake up
Tierra
JUSB2/ 3
2
1
Contactos Asignacion Contactos Asignacion
12
43
56
87
910
+5V +5V
Data (-)Data (-)
Data (+) Data (+)
Tierra Ground
Key NA
1
JKBV1
Contacto 1-2 on ==> 5V (Para Funcion Normal)
Contacto 2-3 on ==> 5V_SB (Para Funcion S3 Wake-up)
1
JUSBV1/2