Birlea STRATUS User manual

1 OF 4
ASSEMBLY INSTRUCTIONS
IMPORTANT: READ THESE INSTRUCTIONS CAREFULLY BEFORE
ATTEMPTING TO ASSEMBLE OR USE YOUR OTTOMAN BED
FRAME.
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE
HEALTH & SAFETY:
DO NOT jump on this bed frame
DO NOT use this bed frame if any parts are missing, damaged or worn
DO NOT use this bed frame unless all fixings are tightly secured
Always use on a level, even surface
WARNING: IF THIS BED FRAME IS ON A LAMINATED FLOOR YOU MUST PLACE SOME
PROTECTION UNDER ALL LEGS TO STOP THE BED FRAME FROM MOVING. IF THIS IS NOT
ADHERED TO THERE IS NO GUARANTEE IF THE BED FRAME COLLAPSES
CARE & MAINTENANCE:
Periodically check all screws & fixings to ensure they are tightly secured
DO NOT push the bed frame as this will damage the legs.
Always lift the bed with 2 people whenever you need to change the bed frames position
Keep any sharp objects away from the bed frame
STRATUS OTTOMAN 4 6 BED'
Please keep small parts out of reach of children.
WARNING:Take care when assembling the base,assemble the ottoman as close
to its final position.The Ottoman has a powerful mechanism and after assembly
should only be opened when the mattress is in place.

DO NOT USE ANY POWER TOOLS AS THIS MAY DAMAGE THE BED
FRAME AND WILL INVALIDATE ANY CLAIMS.
To fix the legs(6) to the headboard(1)and footboard(2).
To fix the side rails(3) to the headboard(1) and footboard(2) you will need to
use hardware parts (B),(C),(D) with the M5 allen key(A).
DO NOT FULL TIGHTEN AT THIS STAGE.
1
2Footboard x 1
(M8x30mm) x 8
Bolts
B
CSpring washer x 8
DFlat washer x 8
M5 Allen Key
A
Legs x 4
6
Headboard x 1
3Side rails x 2
2 OF 4
Step 1
32
1
6
PARTS LIST HARDWARE LIST
No No
Qty Qty
1
2
3
4
5
6
7
8
9
1
1
2
26
A
B
C
D
E
F
G
H
I
J
K
1
8
16
14
1
14
2
18
Item Item
Footboard
Headboard
Side Rails
Cross Bar
Slats
Pull Strap
Single Slat Caps
4
L
M5 Allen Key
Bolts(M8x30mm)
Spring Washer(M8)
Flat Washer(M8x22mm)
Nuts(M8x14mm)
Spanner(M14)
Bolts(M8x45mm)
10
11
12
Support Leg
M
Bolts(M8x65mm)
26
Bolts(M8x16mm)4
Centre Slat Caps 13
Centre Support Bar 1
Legs 4
13
Woven Fabric
14
Front Frame Rail
1
15
Back Frame Rail
1
Left Frame Rail
1
Right Frame Rail
1
Cross Support Bar
2
Bolts(M6x16mm)
Hydraulic part 2
NBatten 2
OM4 Allen Key
1
Box
1
1
2
1
2
1
1
1
1
1
1
1
2
2
1
1
1
1
1
1
Box
1
1 1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
- BOX 1

H
H
A
A
H
A
5
8
E
F
E
F
F
E
13
11
12
J
A
A
A
14
J
A
J
J
To attach the front frame rail(11)and back frame rail (12) to the left frame rail (13) and
right frame rail(14), you will need hardware parts (J) with the M5 allen key(A).
To attach the centre support bar(5) to the front frame rail(11)and back frame rail(12), you
will need hardware parts (H) and (E) with the M5 allen key(A) and the spanner(F).
To attach the support leg (8) to the centre support bar(5),you will need hardware
parts (H) and (E) with the M5 allen key(A) and the spanner(F).
DO NOT USE ANY POWER TOOLS AS THIS MAY DAMAGE THE BED
FRAME AND WILL INVALIDATE ANY CLAIMS.
2
Headboard x 1
Footboard x 1
1
Cross Bar x 1
Bolts (M8x45mm) x 6
H
M5 Allen Key
Hydraulic part x 2
M
Bolts(M6x16mm) x 2
C
D
Spring Washer x 6
Flat Washer x 6
G
4
A
3 OF 4
To attach the hydraulic part(M) and batten(N) to the headboard(1),footboard(2) you will need to
use hardware parts (H) and (C) and (D) with the M5 allen key(A).
To fix the cross bar(4) to the side rails(3)you will need to use hardware parts (G) with (O)
Step 2
12
13
11
8
HBolts(M8x45mm)x 6
ENuts x 6
FSpanner x 1
AM5 Allen Key x1
JBolts(M8x16mm)x 4
Front Frame Rail x 1
Back Frame Rail x 1
Centre Support Bar x 1
Support Leg x 1
Left Frame Rail x 1
Right Frame Rail x 1
14
5
Step 3
DO NOT USE ANY POWER TOOLS AS THIS MAY DAMAGE THE BED FRAME
AND WILL INVALIDATE ANY CLAIMS.
NBatten x 2
3Side rails x 2H
A
DC
H
A
DC
H
A
DC
MN
4
G
3
2
1
Do not try to press down the gas lift hinge now.
It is hard because of the resistance of gas lift
struts.Please go to next step to assemble the
metal frame.
OM4 Allen Key x 1
HEADBOARD

Additional Information :
.
For complete product information ,images and dimension diagrams please visit the website www.birlea.com
.
If you have any issues with your item please contact the retailer directly you purchased it from who will be
able to resolve any issues with Birlea.
.
Why don't you send us photos of your assembled furniture to [email protected] to be shared in our
#birleahome feature on instagram.
10
To attach the metal frame(11/12/13/14) to the hydraulic parts(M),you will need to
use hardware parts (H)、(E) with the M5 allen key(A) and the M14 spanner(F).
To attach the cross support bar(15) to the left frame rail(13) and the right frame
rail(14),you will need,you will need to use hardware parts (I)、(E) with the M5 allen
Step 4
key(A) and the M14 spanner(F).
DO NOT USE ANY POWER TOOLS AS THIS MAY DAMAGE THE BED FRAME
AND WILL INVALIDATE ANY CLAIMS.
Step 5
To attach the pull strap(9) to the left or right frame rail (13/14) you will place the pull strap(9)
beneath the metal frame and then pull the strap on the inner side of the frame through the
To assemble the slats(7) place a single plastic caps(K) onto each end of every slat then need
push the centre slat caps(L) into the metal frame.
Tilt the bedframe on to its side and attach the fabric base10.( )
K
L
10
7
Centre Slat Caps x13
Pull Strap x 1
Slats x 26
Woven Fabric x1
9
Single Slat Caps x 26
strape on the outer side of the frame to form a knot.
DO NOT USE ANY POWER TOOLS AS THIS MAY DAMAGE THE BED FRAME AND
WILL INVALIDATE ANY CLAIMS.
15
I
H
A
F
E
Cross Support Bar x 2
M5 Allen Key
Bolts (M8x65mm) x 4
Nuts x 10
Spanner
Bolts (M8x45mm) x 6
3
2
1
15
A
I
F
E
Gas Lift Pre-fixed
E
FF
FE
E
A
H
H
A
H
18
15
HEADBO ARD
4 OF 4
9
14
9
7
7
K
K
L