Mocka Eliza Desk User manual

Eliza Desk
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
1
Wall Strap
x2
washer
Z
Y
wall
anchor
x1
X
safety
strap x1
WV
screw
x1
wall
screw
x1
WARNING: Any furniture that is not anchored to a wall has the potential to tip over in certain
circumstances, i.e. if a child attempts to climb up on the furniture or in the event of an earthquake.
Accordingly, we recommend that all furniture is anchored to a wall. We supply a free safety wall anchor
with all furniture sold and we recommend these are used to prevent your product tipping. The fixing device
provided should fit most wall types, but please note that different wall materials may require different fixing
devices from those supplied.
bolt
x14
x4
AB C D E F G H
JKLM N O
Hardware Supplied
dowel
x12
P
long
bolt
x6
screw
x24
slide
rail x2
slide
rail x2
slide
rail x2
slide
rail x2
locking
nut x14
screw
x6
x4
I
wedge
x2
handlescrew small bolt
x3 x8
screw
key x1
Allen
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
Phillips & Flathead screwdrivers
long
*We recommend using a Flathead screwdriver to tighten all locking nuts 100% before first use.
Please clear any loose wood from the locking nut holes before inserting the nut to ensure it locks 100%.
Q
bolt
x8

Eliza Desk
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
2
12
Attach 1x slide rail (F) and 1x slide rail (G) to panels [3] and [4] as
shown and secure with 6x screws (E). Tighten with a screwdriver.
Attach 1x slide rail (G) and 1x slide rail (F) to panel [5] as shown
and secure with 6x screws (E). Tighten with a screwdriver.
F
F
CL
E
F
CL
E
G
G
CR
E
G
G
CR
E
E
E
E
E
E
E
E
E
E
E
E
F
E
5
5
3
4
FLIP

Eliza Desk
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
3
3 4
Insert 6x bolts (C) into panel [1] as shown. Tighten with a screwdriver. Attach panels [3], [4] and [5] to the panel [1] with 6x dowels (A) and
secure with 6x locking nuts (D). Tighten with a screwdriver.
1
1
3
4
5
C
C
C
C
C
C
A
A
A
D
D
D
A
A
A
D
D
D

Eliza Desk
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
4
65
Slide panel [6] down along the grooves between the panels [3] and [4]. Attach panel [2] to panels [3], [4] and [5] with 6x dowels (A) and
secure with 6x long screws (B). Tighten with a screwdriver.
B
B
B
A
B
B
A
B
B
A
A
3
3
2
5
6
4
4

Eliza Desk
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
5
7 8
Attach panels [7] and [8] to panels [9], [10] and [11] with 6x long bolts (P).
Tighten with an allen key (N).
Attach panels [7], [8], [9] and [10] to panel [2] with 8x bolts (Q).
Tighten with an allen key (N).
Q
Q
Q
Q
Q
N
Q
Q
Q
N
2
7
7
8
8
10
10
99
P
P
P
P
P
P
P
11

Eliza Desk
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
6
9 Drawers x2 10 Drawers x2
Assembly Instructions
Insert 4x bolts (C) into panels [12]/[13]. Tighten with a screwdriver.
Attach panels [14] and [15] to front panels [12]/[13] and secure
with 4x locking nuts (D). Tighten with a screwdriver.
Slide panel [16] along the grooves between the side panels [14] and
[15] to form the base of the drawer. Attach panels [14], [15] and
[17] as shown using 4x screws (M). Tighten with a screwdriver.
DD
MM
M
M
CC
CC
DD
12
13
14
14
14
15
15
16
17
15
12
13
12
13
12
13

Eliza Desk
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
7
1211 Drawers x2
Attach slide rail (I) and slide rail (H) to the underside of the side
panels as shown. Secure with 4x screws (E) and tighten with a
screwdriver. Attach handle (O) to panels [12]/[13] and secure with 2x
screws (E). Tighten with a screwdriver.
Insert the assembled drawers into the corresponding compartments as
shown. Ensure the drawers slide easily along the rails.
E
E
OE
E
E
E
H
I
14
15
12
12
13
13
12
13

Eliza Desk
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
8
13 14
Attach 4x wedges (J) into the corners of the back of the unit and secure
with 4x screws (K). Tighten with a screwdriver. Attach 1x safety strap (V)
to the top of the back side of the unit as shown using 1x washer (Z) and
1x screw (W). Tighten with a screwdriver. Attach panels [18] to panels [7]
and [8] with 3x small bolts (L). Tighten with an allen key (N).
Once assembled lift furniture into place, do not drag. Use a drill to
create a small hole lining up with the top of the safety strap (V).
Fasten to the wall using 1x washer (Z), 1x wall anchor (X) and
1x wall screw (Y). Ensure unit is balanced and steady before use.
You’re done, enjoy!
V
Z
W
K
J
X
Y
Z
L
L
L
K
J
V
Z
W
wall
anchor
screw
strap
washer
7
8
18
18
L
N