Birlea BERLIN 4’6 BED User manual

Vendor: S000145
Page 1 of 4
ASSEMBLY INSTRUCTIONS
BERLIN 4’6 BED
IMPORTANT: READ THESE INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING OR USING YOUR BERLIN 4’6 BED
FRAME.
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.
HEALTH & SAFETY:
DO NOT jump on this bed frame.
DO NOT use this bed frame if any parts are missing, damaged or worn.
DO NOT use this bed frame unless all fixings are secured.
Please keep small parts out of reach of children.
lways use on a level, even surface.
WARNING: If th s bed s placed on a non-carpeted floor you must place some protect on under all legs to stop
the bed frame from mov ng. If th s s not adhered to there s no guarantee f the bed frame collapses.
CARE & MAINTENANCE:
ssemble in the room of use.
Periodically check all screws & fixings to ensure they are secure.
DO NOT push the bed frame as this will damage the legs.
lways lift the bed with two people to reposition.
Keep any sharp objects away from the frame.
www.birlea.com

Vendor: S000145
Page 2 of 4
Parts L st Hardware L st (found n box 2)
Part Descr pt on Box Qty Part Descr pt on Qty
1 Headend 1 1 A M8 x 30 mm Bolt 12
2 Footend 2 1 B M8 x 40 mm Bolt 4
3 Side Rail 2 2 C M8 x 13 mm Nut 4
4 Centre Rail 3 1 D Spring Washer 8
5 Support Leg 3 2 E Flat Washer 8
6 Slat 3 26 F
M5 llen Key
1
7 Leg 3 4 G Spanner 1
** You w ll need a screwdr ver (not prov ded). H M8 x 70 mm Bolt 4
I M4 x 70 mm Screw 4
J Single Slat Cap 26
K Double Slat Cap 13

Vendor: S000145
Page 3 of 4
Step 1: ttach the legs (7) to the headend and footend (2) using hardware parts F, H and I with a screwdriver
(not provided).
DO NOT use any power tools as th s may damage the frame and w ll nval date any cla m.
Step 2: ttach the support legs (5) to the centre rail (4) using hardware parts B, C, F and G.
DO NOT use any power tools as th s may damage the frame and w ll nval date any cla m.

Vendor: S000145
Page 4 of 4
Step 3: ttach the side rails (3) and centre rail (4) to the headend (1) and footend (2) using hardware parts ,
D, E and F.
DO NOT use any power tools as th s may damage the frame and w ll nval date any cla m.
Step 4: Place hardware part J onto the end of each slat (4) then join the slats together with hardware part K.
Press firmly into the side rails (3) and centre rail (4).
DO NOT use any power tools as th s may damage the frame and w ll nval date any cla m.
Additional Information:
• For complete product information, images and dimension diagrams please visit the
website www.birlea.com
• If you have any issues with your item please contact the retailer directly you
purchased it from who will be able to resolve any issues with Birlea.
• Why don’t you send us photos of your assembled furniture to [email protected] to be
shared in our #birleahome feature on Instagram.