Birlea Arlo 2 Drawer Bedside User manual

Assembly Instructions
Thank you for
purchasing a
Birlea product.
For a chance to win a Love 2 Shop
voucher simply post a picture of your
new product on your preferred social
channels tagging Birlea Furniture and
using the hashtag #ShareYourStyle
and #Birlea. One winner will be
selected at random each month.
To view our full terms and conditions please visit www.birlea.com
Are you happy with your purchase?
Yes: That’s great, we would love to hear more from you. Please leave us a review on our
social media channels or Trustpilot. Your feedback will be greatly appreciated.
No: If for any reason there is something missing, indifferent or incorrect with your order,
please contact the retailer you purchased the item from. We will work with the retailer
to resolve your issue as quickly as possible.

Arlo - 2 Drawer Bedside
Assembly Instructions
Page 2 of 8
For Care and Maintenance of your
bedside...
• Always assemble in your desired room of use.
• Always check all screws and fixings periodically
to ensure they are still secure.
• Do not push or pull this bedside as it will cause
damage.
• Always lift this bedside with a second person to
prevent damage or injury.
• Keep any sharp objects away from this bedside.
• Do not use any power tools as this will void your
guarantee.
For your Health and Safety...
• Assemble this product laying flat, not upright.
• Do not use this product if you find missing,
damaged or worn parts. Please contact your
retailer.
• Please do not use this product until you have fully
secured all fixings.
• Please keep all small components away from
children.
• Please ensure this product is on an even, level
surface.
Also...
If your desired room of choice has a non-carpeted surface please ensure that you use some form of
protection and do not place directly on the wooden floor. This will prevent the product from moving and
therefore collapsing which will void your guarantee..
Before you begin...
1. Please check you have received the correct product.
2. Unpack all boxes and lay out each component on the floor.
3. Check your product for any damage that may be immediately obvious. If damage is identified,
please contact your retailer.
4. Please read through these instructions thoroughly to ensure you have constructed your bed
correctly.

Page 3 of 8
Parts
01. Top Panel (x1)
Hardware
02. Bottom Panel (x1) 03. Left Side Panel (x1) 04. Right Side Panel (x1)
05. Back Panel (x1) 06. Drawer Front (x2) 07. Drawer Side (x4) 08. Drawer Back (x2)
09. Drawer Bottom (x2)
A1. Cam Lock (x4) A2. Minifix Screw (x4) A3. Plastic Cap (x4) B. M8x30mm Wood Dowel (x8)
C. M6x50mm Wood Screw (x4) D. M4 Allen Key (x1) E. M3x12mm C.B Screw (x4)
F. M3.5x16mm C.B Screw (x40) G. M4x38mm C.B Screw (x16) H. 5/8 Nail (x28) I. Handle (x2)
K. Metal Leg (x4)
J1. 14" Drawer Runner - Left/Right (x4) J2. 14" Drawer Runner - Left/Right (x4)

Page 4 of 8
Step 1
Unpack all components from the boxes and check you are not missing anything. Please check these against the list on
page 3. Should you identify any missing components, please contact the retailer you purchased the bed from.
Step 2
Firstly, attach 4x Minifix Screw (A2) to 1x Top Panel (01). Please do not use any power tools for this assembly as it will
void your guarantee.
A2 x4
01

Page 5 of 8
Step 3
Attach 2x 14" Drawer Runner - Left (J1) to 1x Left Side Panel (03) using 6x M3.5x16mm C.B Screw (F). Next attach 2x
14" Drawer Runner - Right (J1) to 1x Right Side Panel (04) using 6x M3.5x16mm C.B Screw (F).
J1
FF
F
J1
J1
A1
A1
B
B
x2
x2
x4
x4
03
04
x4 x4
x4
Step 4
Attach 8x M8x30mm Wood Dowel (B) to either end of 1x Left Side Panel (03) and 1x Right Side Panel (04). Finally, at-
tach 2x Cam Lock (A1) to 1x Left Side Panel (03) and 2x Cam Lock (A1) to 1x Right Side Panel (04).
J1
FF
F
J1
J1
A1
A1
B
B
x2
x2
x4
x4
03
04
x4 x4
x4
FOR UP
1st HOLE
MARKING
FOR FRONT
Top
Front
Top
Front

Page 6 of 8
Step 5
Attach 1x Left Side Panel (03) and 1x Right Side Panel (04) to 1x Top Panel (01) using 4x Cam Lock (A1) and 4x Minifix
Screw (A2) pre-attached in the previous step using a Screwdriver (Not Provided). Then cover 4x Minifix Screw (A2)
using 4x Plastic Cap (A3).
A1 A2
A1
A3
01
03
04
Step 6
Attach 1x Bottom Panel (02) to 1x Left Side Panel (03) and 1x Right Side Panel (04) using 4x M6x50mm Wood Screw (C)
and 1x M4 Allen Key (D).
C
D
01
02 03
04

Page 7 of 8
Step 7
Attach 1x Back Panel (05) to the entire body using 12x 5/8 Nail (H) and a Hammer (Not Provided).
Step 8
Attach 4x Metal Leg (K) to 1x Bottom Panel (02) using 16x M3.5x16mm C.B Screw (F) and Screwdriver (Not Provided).
Step 9
Attach 1x Handle (I) to 1x Small Drawer Front (06) using 2x M3.5x16mm C.B Screw (E). Then, attach 4x Drawer Side (07)
using 16x M4x38mm C.B Screw (G). Finally, attach 2x Drawer Bottom (09) to the drawer bodies using 16x 5/8 Nail (H) and
a Hammer (Not Provided).
H
02 03
05
K
F
02
03
05
K
K
K
06
I
06
07
07
08
06
07
07
08
09

Page 8 of 8
Step 10
Attach 2x 14" Drawer Runner - Left (J2) to the base of the drawer bodies using 6x M3.5x16mm C.B Screw (F). Then
attach 2x 14" Drawer Runner - Right (J2) to the base of the small drawer body using 6x M3.5x16mm C.B Screw (F).
FF
F
F
F
F
F
08
08
07
09
13
Step 11
Assemble the drawer's along the drawer slides as shown below.
01
03
06
I
K
K
06
I
J2
J2
J2
J2
J2
J2