Bison ST83F User manual

1
P A R T S L I S T
Item Qty Description Item Qty Description
A 1 8’ Folding Table B 4 VelcroTM
C 1 Front Pad D 1 Right Pad
E 1 Left Pad F 4 Table Mounting Bracket
G 2 Corner Mounting Bracket H 24 1/4” X 1/2” Machine Screw
I 24 1/4” External Tooth Lock Washer
♦ Inspect all contents prior to installation. Report any missing parts to dealer immediately.
♦ Read all instructions before proceeding.
—— Instruction Manual ——
ST83F AND ST84F ASSEMBLY INSTRUCTION
School Spirit Activity Table
Date: 10/15/08 Rev: 1 B.A. N.J.C. File: \pub\ST8384.pub Ref#: 880022
Customer Service
[phone]
1. Install two Table Mounting Brackets (F) to the
top back side of Front Pad (C) using 1/4” X 1/2”
Machine Screws (H) and 1/4” External Tooth
Lock Washers (I). See Figure 1.
2. Install one Table Mounting Bracket (F) to the top
(29” ) back side of both the Right Pad (D) and
Left Pad (E) using 1/4” X 1/2” Machine Screws
(H) and 1/4” External Tooth Lock Washers (I).
See Figure 2.
3. Install one Corner Mounting Bracket (G) to the
back front edge of both the Right Pad (D) and
Left Pad (E) using 1/4” X 1/2” Machine Screws
(H) and 1/4” External Tooth Lock Washers (I).
See Figure 2.
Velcro
Table Mounting Bracket (F)
Velcro
Corner Mounting Bracket (G)
Velcro
F
HI
C
Figure 1

2
Note:
Make sure all surfaces are clean and dry prior to attaching VelcroTM strips
4. Attach one piece of Velcro (B) along the edge of
each end of the 8’ Folding Table (A) 3” from the
front. Attach two pieces of Velcro (B) along the
front edge 12 1/2” from each end. See Figure 3.
5. Hang Front Pad (C) to the front of 8’ Folding
Table (A) with equal amount of Front Pad (C)
extending off each side. See Figure 4.
6. Hang Left Pad (E) and Right Pad (D) on both sides
of 8’ Folding Table (A). Make sure Corner
Mounting Brackets (G) are secured to the Velcro
on Front Pad (C). See Figure 5.
G
F
DE
HI
Figure 2
Velcro B
A
Figure 3
Front Pad C
A
Figure 4
Figure 5