Fisher-Price DTM19 User manual

1
DTM19
T5508
fisher-price.com
Keep this instruction sheet for future reference, as it contains important information.
Adult assembly is required.
Tool needed for assembly: Phillips Screwdriver (not included).
Requires three C (LR14) alkaline batteries (not included) for operation.

2
Consumer Information
US Standard Product Packaging International Packaging & Instructions
& limited space US Packaging
US Instructions
CONSUMER ASSISTANCE
1-800-432-5437 (US & Canada)
1300 135 312 (Australia)
Fisher-Price, Inc., 636 Girard Avenue, East Aurora, NY 14052.
Hearing-impaired consumers: 1-800-382-7470.
Outside the United States:
Canada: Mattel Canada Inc., 6155 Freemont Blvd.,
Mississauga, Ontario L5R 3W2; www.service.mattel.com.
Great Britain: Mattel UK Ltd, Vanwall Business Park,
Maidenhead SL6 4UB. Helpline: 01628 500303.
www.service.mattel.com/uk
Mattel Europa B.V., Gondel 1, 1186 MJ Amstelveen, Nederland.
Australia: Mattel Australia Pty. Ltd., 658 Church Street,
Locked Bag #870, Richmond, Victoria 3121 Australia.
New Zealand: 16-18 William Pickering Drive,
Albany 1331, Auckland.
CONSUMER ASSISTANCE
1-888-892-6123 (US & Canada)
1300 135 312 (Australia)
CONSUMER ASSISTANCE
1-888-892-6123 (US & Canada)
1300 135 312 (Australia)
CONSUMER ASSISTANCE
1-800-432-5437 (US & Canada)
1300 135 312 (Australia)
CONSUMER ASSISTANCE
1-800-432-5437 (US & Canada)
1300 135 312 (Australia)
CONSUMER ASSISTANCE
1-800-432-5437 (US & Canada)
1300 135 312 (Australia)
CONSUMER ASSISTANCE
1-800-432-5437 (US & Canada)
1300 135 312 (Australia)
US Tech Product Packaging
US
Power Wheels Packaging & Instructions
3LA (US English/Canada French/LAAM Spanish)
Power Wheels Packaging & Instructions
CONSUMER ASSISTANCE
1-800-348-0751 (US & Canada)
Fisher-Price, Inc., 636 Girard Avenue, East Aurora, NY 14052.
Hearing-impaired consumers: 1-800-382-7470.
BabyGear Instructions 3LA
CONSUMER ASSISTANCE
ATENCIÓN AL CLIENTE
SERVICE À LA CLIENTÈLE
1-800-432-5437 (US & Canada)
Fisher-Price, Inc., 636 Girard Avenue, East Aurora, NY 14052.
Hearing-impaired consumers/Clientes con problemas auditivos/
Pour les malentendants : 1-800-382-7470.
Centro de Servicio en México:
59-05-51-00 Ext. 5206 ó 01-800-463-59-89
BabyGear Instructions English & Spanish
CONSUMER ASSISTANCE
ATENCIÓN AL CLIENTE
1-800-432-5437 (US)
Fisher-Price, Inc., 636 Girard Avenue, East Aurora, NY 14052.
Hearing-impaired consumers/Clientes con problemas auditivos
1-800-382-7470.
Centro de Servicio en México:
59-05-51-00 Ext. 5206 ó 01-800-463-59-89
CONSUMER ASSISTANCE
ATENCIÓN AL CLIENTE
SERVICE À LA CLIENTÈLE
1-800-348-0751 (US & Canada)
Fisher-Price, Inc., 636 Girard Avenue, East Aurora, NY 14052.
Hearing-impaired consumers/Clientes con problemas auditivos/
Pour les malentendants : 1-800-382-7470.
Centro de Servicio en México:
59-05-51-00 Ext. 5206 ó 01-800-463-59-89
Update: 1/21/2016
CAN ICES-3 (B)/NMB-3 (B)
Operation is subject to the following two conditions: (1) this device may not cause interference,
and (2) this device must accept any interference, including interference that may cause undesired
operation of the device.
L’utilisation de ce dispositif est autorisée seulement aux conditions suivantes : (1) il ne doit pas
produire de brouillage et (2) il doit pouvoir tolérer tout brouillage radioélectrique reçu, même si
ce brouillage est susceptible de compromettre son fonctionnement.
©2016 Mattel. All Rights Reserved. DTM19-0970
PRINTED IN CHINA 1101148712-DOM

3
Main Assembly
SHOWN ACTUAL SIZE
Note: Tighten and loosen all screws
with a Phillips Screwdriver. Do not
over-tighten the screws.
M3,5 x 1,6 cm Screw - 14
Lower Arm
Leg with Button
Base
Upper Arm
Leg
Home PlateTether
Assembled Parts

4
Leg with Button
Socket
• Align the rib on the upper post to the groove
in the lower post (on the main assembly.
Slide the upper post into the lower post.
Hint: This will require some force.
• Push the lever into one of the slots on the
side of the upper post.
• Feed the plug on the end of the lower post
down through the hole in the base.
• "Snap" the lower post into the base.
Lever
• Turn the assembly on its side.
• Fit the base onto the leg with the button.
• Insert four screws into the bottom of the leg
and tighten.
• Fit the plug coming from the underside of
the base into the socket in the leg with
the button.
Upper
Post
Plug
Base
Plug
BOTTOM VIEW
• Fit the other leg to the assembly.
• Insert six screws into the leg and tighten.
Leg
Lower
Post
Assembly
1
3
4
5
2
IMPORTANT!
Follow this
step carefully.

5
• Turn the assembly upright.
• Place home plate over the the button on
the leg assembly for either a left or
right-handed batter.
Place Home
Plate Here for
a Left-Handed
Hitter
Place Home
Plate Here for
a Right-Handed
Hitter
• Turn the assembly on its side.
• Insert four screws into the leg assembly
and tighten.
BOTTOM VIEW
• "Snap" the upper arm to the lower arm.
Lower Arm
Upper Arm • "Snap" the tether up into the arm.
Tether
• "Snap" the arm assembly to the top of the
main assembly.
6
7
8
9
10
Assembly

6
Battery Safety
Information
Battery
Installation
• Locate the battery compartment on the toy.
• Loosen the screws in the battery
compartment door and remove the door.
• Insert three C (LR14) alkaline batteries.
Hint: We recommend using alkaline batteries
for longer battery life.
• Replace the battery compartment door and
tighten the screws.
• If this product begins to operate erratically,
you may need to reset the electronics. Turn
the power switch off and then back again to
turn on.
• When sounds or motion become faint or
stop, it's time for an adult to change
the batteries!
1,5V x 3
C (LR14)
• Protect the environment by not
disposing of this product with
household waste (2012/19/EU).
Check your local authority for
recycling advice and facilities.
In exceptional circumstances, batteries may
leak fluids that can cause a chemical burn
injury or ruin your product. To avoid
battery leakage:
• Do not mix old and new batteries or batteries
of different types: alkaline, standard (carbon-
zinc) or rechargeable (nickel-cadmium).
• Insert batteries as indicated inside the
battery compartment.
• Remove batteries during long periods of
non-use. Always remove exhausted batteries
from the product. Dispose of batteries safely.
Do not dispose of this product in a fire. The
batteries inside may explode or leak.
• Never short-circuit the battery terminals.
• Use only batteries of the same or equivalent
type, as recommended.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the
product before charging.
• If removable, rechargeable batteries are
used, they are only to be charged under
adult supervision.

7
Step-up to the Plate!
• Load the balls into the cage.
• Turn the power switch to ON.
• Lift the lever and raise or lower the post to
the appropriate height for your child.
• Push the lever into one of the slots on the
side of the upper post to secure the height.
Lever
• Tap home plate with the end of your bat to
load a ball.
Hint: For best results, make sure the balls are
clean and dry.
• Swing and hit the ball.
• Tap home plate again to load another ball.
• When you're finished playing with the toy,
turn the power switch to OFF.
IMPORTANT! Only use balls supplied with this toy.
1
4
5
2
3

8
Consumer Information
Tips
• We recommend that this toy be used
outdoors.
• Do not use outdoors when it is raining
or there is wet grass. The balls will not
load properly.
• Be sure that when your child is batting,
there are no other children in or around the
batting area, including directly in front of
the toy.
• This toy is designed for use with soft balls
and plastic bat (both included). It is not
designed for use with wooden or metal bats,
or regulation baseballs or softballs. Use of
these balls and bats may damage this toy.
• Hold the bat with hands together, about one
or two inches (2,5 - 5 cm) from the knob at
the end of the bat.
- Right-handed batters should have the right
hand on top of the left hand.
- Left-handed batters should have the left
hand on top of the right hand.
• Stand with feet about shoulder width apart.
• Swing with a smooth and level motion.
Care
• Do not leave this product outdoors. Store
this product indoors when not in use.
• This product may be wiped clean using
a mild cleaning solution and a damp cloth.
Do not use bleach. Do not use harsh or
abrasive cleaners. Rinse clean with water
to remove residue. Do not immerse
this product.
• Periodically inspect this product for wear
and damage and replace any cracked parts.
FCC STATEMENT (UNITED STATES ONLY)
This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC
rules. These limits are designed to provide
reasonable protection against harmful
interference in a residential installation.This
equipment generates uses and can radiate
radio frequency energy and, if not installed
and used in accordance with the instructions,
may cause harmful interference to radio
communications.However, there is no
guarantee that interference will not occur
in a particular installation.If this equipment
does cause harmful interference to radio or
television reception, which can be determined
by turning the equipment off and on, the user
is encouraged to try to correct the interference
by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the
equipment and receiver.
• Consult the dealer or an experienced radio/
TV technician for help.
NOTE: Changes or modifications not expressly
approved by the manufacturer responsible for
compliance could void the user’s authority to
operate the equipment.
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that
may cause undesired operation.