Bison Sharpshooter BA187 User manual

1
 Inspect all contents prior to installation. Report any missing parts to dealer immediately.
 Read all instructions before proceeding.
—— Instruction Manual ——
BA187
Sharpshooter™ Ballcart
1. Use 1/2"Button Head Cap Screws (F) to install the three Short Horizontal Bars (E) between the Tall
Frame Side (A) and Short Frame Side (B). Hand tighten hardware. See Figure 1.
2. Use 1/2"Button Head Cap Screws (F) and 1/2"Hex Nuts (G) to attach Long Horizontal Bar Bracket (C)
to Short Frame Side (B). Hand tighten hardware. See Figure 1.
3. Use 1/2"Button Head Cap Screws (F) to attach the Long Horizontal Bars (D) between the Tall Frame
Side (A) and Long Horizontal Bar Bracket (C). Hand tighten hardware. See Figure 1.
4. Insert the Casters (I) into the bottom of Tall Frame Side (A) and Short Frame Side (B). See Figure 1.
5. Place assembled ball cart on a smooth flat surface. Use the 5/16” Allen Wrench (H) to tighten all
hardware.
See Figure 1
Date: 7/11//2018 Rev: 2 B.A. N.J.C. File: \\bisonserver\publisher\BA187.pub Ref#:950498
Customer Service
[phone]
P A R T S L I S T
Item Qty Description Item Qty Description
A 1 Tall Frame Side F 12 1/2” Button Head Cap Screw
B 1 Short Frame Side G 2 1/2" Hex Nut
C 1 Long Horizontal Bar Bracket H 1 5/16” Allen Wrench
D 2 Long Horizontal Bar I 4 Caster
E 3 Short Horizontal Bar

2
Figure 1