Bissell 1422 Series User manual

CONFIDENTIAL
ANNA
32.4vDC / 120v AC
HYBRID UPRIGHT VACUUM CLEANER
WITH LIFT-OFF
Series 1422
USER GUIDE
1422
Series

This warranty gives you specific legal rights and you may also have other rights which may vary from state to state. If you need
additional instructions regarding this warranty or have questions regarding what it may cover, please contact BISSELL
Consumer Care by e-mail, telephone, or regular mail as described below.
Limited 5 Year Warranty
Subject to the *EXCEPTIONSAND EXCLUSIONS identified below, upon receipt of the product BISSELL will repair or replace
(with new or remanufactured components or products), at BISSELL’s option, free of charge from the date of purchase by the
original purchaser, for five years a defective or malfunctioning part.
See information below on how to return your BISSELL product for service.
This warranty applies to product used for personal, and not commercial or rental service. This warranty does not apply to
routine maintenance components such as filters, belts, or brushes. Damage or malfunction caused by negligence, abuse,
neglect, unauthorized repair, or any other use not in accordance with the User's Guide is not covered.”
If your BISSELL product should require service:
Contact BISSELL Consumer Care.
By phone (Toll-Free): (1)855-267-2662
Monday-Friday 8am-4:45pm EST
BISSELL IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY NATURE ASSOCIATED WITH THE
USE OF THIS PRODUCT. BISSELL’s LIABILITY WILL NOT EXCEED THE PURCHASE PRICE OF THE PRODUCT.
Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or
exclusion may not apply to you.
*EXCEPTIONS AND EXCLUSIONS FROM THE TERMS OF THE LIMITED WARRANTY
THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ANY OTHER WARRANTIES EITHER ORAL OR WRITTEN.ANY
IMPLIED WARRANTIES WHICH MAY ARISE BY OPERATION OF LAW, INCLUDING THE IMPLIED WARRANTIES OF
MERCHANTABILITYAND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE YEAR DURATION FROM THE
DATE OF PURCHASE AS DESCRIBED ABOVE.
Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you.
Warranty

HYBRID UPRIGHT VACUUM
CLEANER
Product View
STAIR TOOL
LIFT OFF
DOCKING
STATION
Product View
FOOT ASSEMBLY
LIFT-OFF CAPSULE

LIFT-OFF® RELEASE
PEDAL
BUMPER
BRUSH BAR WINDOW
Touch Control Panel
TELESCOPING HANDLE
TILT RELEASE
PEDAL
TELESCOPIC WAND
STORAGE/STANDBY
SWITCH
POWER ON/OFF
BATTERY CHECK
INDICATOR
HANDLE RELEASE LATCH
STRETCH HOSE
HOSE HANDLE
DUSTING BRUSH
CREVICE TOOL
EXHAUST AIR VENT
WHEEL
DIRT CUP DOOR LATCH
AC SOCKET
DIRT CUP RELEASE
LATCH
DIRT CUP
Product View

Brush bar ON/OFF:
Press this touch panel button to turn brush bar ON/OFF
Maximum suction:
Press this touch panel button to select max suction power
Medium suction:
Press this touch panel button to select medium suction power
Low suction:
Press this touch panel button to select low suction power
Preset Floor / Stairs
In floor clean mode the FLOOR preset can be pressed = Max
suction power + Brush Bar OFF. Use this setting on hard floor
surfaces.
In lift-off and parked mode the STAIRS preset can be pressed
= Med suction power. Use this setting when using the stair
tool on the end of the hose.
Preset Carpet / Crevice
In floor cleaning mode the CARPET preset can be pressed =
Max suction power + Brush Bar ON. Use this setting on
carpeted floors.
In lift-off and parked mode the CREVICE preset can be
pressed = Max suction power. Use this setting when using the
crevice tool at the end of the hose.
Battery indicator:
Displays the capacity level of the battery when the unit is in
standby and while the product is in use.
If a fault condition has occurred the fault can be identified by
reading number of LED’s illuminated and referencing the
fault indication information.
Battery check button:
Push this button to show battery capacity level.
If a fault has occurred press this to identify the fault condition.
Power Button:
Pushing this button turns the vacuum cleaner ON/OFF (unit
must be in standby mode)
Power Socket:
Allows connection to mains AC power
supply
Storage/Standby Switch:
Storage mode is complete power off
For charging the battery and putting into
standby mode slide switch to standby
position
Preset Rugs / Drapes
In floor clean mode the RUGS preset can be pressed = Low
suction power + Brush Bar OFF. Use this setting on loose rugs.
In lift-off and parked mode the DRAPES preset can be pressed =
Min suction. Use this setting when using tools to clean drapes
and other delicate fabrics.
POWER indicator:
Blue LED indicates that an AC plug is plugged in and live. No
illumination indicates AC is not connected.
OPERATIONS
SUCTION ADJUSTMENT
POWER INDICATORS
FLOOR SETTINGS

SLIDE SWITCH TO
STANDBY
PLUG IN POWER CORD
WHICH IS CONNECTED
TO LIVE 120vAC
CHARGING INDICATOR
ILLUMINATES, CHARGE
CYCLE ON BATTERY
INDICATOR WILL BE SHOWN
TO CHARGE THE UNIT
Operations

1. PULL BACK HANDLE
RELEASE
2. PULL UP HANDLE
CLICK
TO
LOCK
3. PULL BACK HANDLE
RELEASE TO PUT
HANDLE DOWN
4. PUSH DOWN
HANDLE TO PUT
HANDLE BACK
DOWN
USE TELESCOPIC
HANDLE
CLICK
TO
LOCK
Operations

1. Once the product
is fully charged,
UNPLUG THE AC
CABLE
4. PRESS FOOT PEDAL
AND RECLINE 5. ENJOY THE FREEDOM OF
CORDLESS VACUUMING
Operations- Cordless Mode
2. Slide Switch to standby
mode
3. Press the Power
Button to turn machine
on.

PRESS FOOT PEDAL
AND RECLINE VACUUM IN CORDED MODE
Operations- Corded Mode
1. Plug in the power
cord to the machine
and to the wall
3. Press the Power
Button to turn machine
on.
2. Slide Switch to standby
mode

RELEASE TELESCOPIC
WAND RELEASE DUSTING
BRUSH RELEASE CREVICE
TOOL
RELEASE STAIR TOOL
Operations- Tool Selection

1. Remove hose handle from docking foot
2. Attach desired cleaning tool to end of hose
3. Clean in corded or cordless mode following
operations instructions
CREVICE TOOL
DUSTING BRUSH
TELESCOPIC WAND
WITH TOOL
Operations- Above floor
cleaning

2. LIFT THE
REMOVABLE POD
3. TO RE-DOCK
PLACE REMOVEABLE POD ONTO
FOOT ALIGNING THE HOSE AND
DOCKING STATION
PUSH DOWN
CLICK
TO
LOCK
1. STEP ONTO FOOT RELEASE PEDAL
Operations- Lift-Off® Pod

PRESS LIFT-OFF® FOOT PEDAL AND
USE THE COMBINATION OF STRETCH
HOSE, TOOL AND CORDLESS
FREEDOM TO VACUUM WHERE YOU
WANT TO
LIFT-OFF® +
LIFT-OFF® +
TELESCOPIC WAND +
TOOL
CREVICE TOOL
DUSTING BRUSH
LIFT-OFF® +
Operations- Lift-Off® Pod
Above Floor Cleaning

REMOVE STAIR TOOL
FROM FOOT
ATTACH STAIR TOOL
TO HOSE
VACUUM THE STAIRS
Operations- Lift-Off® Pod
Stairs

3. EMPTY DIRT INTO
TRASH BIN
1. PUSH BIN RELEASE LEVER AND PULL OUT BIN 2. PRESS LATCH TO OPEN DIRT CUP DOOR AND RELEASE DEBRIS
Maintenance & Care- Empty Dirt Bin

3. Remove filter and tap
off large debris. Replace
filter by inserting and
turning counterclockwise
(until the arrows on the
filter and dirt bin align).
1. PUSH BIN RELEASE LEVER AND PULL OUT BIN
Maintenance & Care- Clean Filters
2. Rotate the tabs on the top of the dirt bin clockwise

LOCK
UN-LOCK
Maintenance & Care- Clean Dirt Bin
1. Separate by twisting the top and
bottom in opposite directions.
2. Wipe the cyclone clean with a
damp cloth.
NOTE: Make sure the cyclone is fully
dry before replacing and operating.

1. UN-SCREW HOSE END TO CHECK
AND REMOVE BLOCKAGES
Maintenance & Care- Clogs

1. REMOVE HOSE FROM
HOUSING TO ACCESS AND
REMOVE BLOCKAGES
2. PUSH HOSE BACK INTO
LOCATION
3. ENSURE THE LARGER
HOUSING RIB ALIGNS WITH
THE SLOT AND CAPTURES
THE HOSE
REMOVE BLOACKAGES FROM
DUCT LOCATED ON THE
UNDERSIDE OF THE FOOT
Maintenance & Care- Clogs