Bissell 16N5 Series User manual

ii ®
USER'S GUIDE
16N5SERIES
Instructions
_roduct View
)peration
andCare
Services

for buyinga BISSELLHealthyHomeVacuumTM
We're glad you purchased a BISSELLvacuum. Everything we know about floor
care went into the design and construction of this complete, nlgh-tech home
cleaning system. By purchasing this product you are helping BISSELLwith our
commitment to reducing our impact on the environment _nrougn an expanding
range of sustainable design efforts.
Your vacuum is well made, and we back it with a limited five year warranty.
We also stand behind it with a knowledgeable, dedicated Consumer Services
department, so, should you ever have a problem, you'll receive fast, considerate
assistance.
My great-grandfather invented the floor sweeper in 1876. Today, BISSELLis a
global leader in the design, manufacture, and service of high quality homecare
products like your carpet cleaner.
Thanks again, from all of us at BISSELL.
Mark J. Bissell
President and Chief Executive Officer
i2¸¸¸¸¸¸¸wwwbi sell00m 800.237.7691

TANTSAFETYINSTRUCTIONS
Whenusingan electrical appliance, basic
precautions should be observed, including
the following:
READ ALLINSTRUCTIONS
BEFOREUSINGYOUR
UPRIGHTVACUUM.
Alwaysconnectto a polarizedoutlet(oneslotis wider
thanthe other).Unplugfrom outlet whennotin useand
beforeconductingmaintenance.
WARNING:Toreduce
the risk of fire, electric shock,
orinjury:
• Donot modifythe polarizedplug to fit a
non-polarizedoutlet or extensioncord.
• Donot leavevacuum cleanerunattendedwhen it
is pluggedin.
• Unplugfrom outlet when notin use and
beforeservicing.
• Donot use outdoorsor on wet surfaces.
• Donot allowchildren to operatevacuum
cleaneror use as a toy.
• Closeattentionis necessarywhen used by or
nearchildren.
• Donotusefor anypurposeotherthandescribedin
thisUser'sGuide.
• Useonly manufacturer'srecommended
attachments.
• Donotusewithdamagedcordorplug.
• If applianceis notworking as it should, has been
dropped,damaged, left outdoors,or dropped
into water,have it repaired at an authorized
servicecenter.
• Donotpullor carry by cord,usecord as a handle,
close adoor on cord,or pull cord aroundsharp
edgesor corners. Donot runapplianceover cord.
Keepcord away from heatedsurfaces.
• Donot unplug by pulling on cord.To unplug,grasp
the plug,not the cord.
• Donothandlevacuum cleaneror plugwith
wethands.
• Donotputanyobjectintoopenings.Donotusewith
anyopeningblocked;keepopeningsfree ofdust,
lint,hair,andanythingthatmayreduceairflow.
• Keephair,looseclothing,fingers,andall partsof
bodyawayfrom openingsandmovingparts.
www.bissell.com
• Turnoff all controls beforeplugging or unplugging
vacuum cleaner.
• Use extra carewhencleaning stairs.
• Unplugbefore attachingthe TurboBrush.
• Do notpick upflammable materials(lighter fluid,
gasoline,kerosene,etc.) or use in the presenceof
explosiveliquidsor vapors.
• Do notpick uptoxic material(chlorinebleach,
ammonia,draincleaner,etc.).
• Donot usevacuumcleanerin an enclosedspace
filledwith vaporsgivenoff by oil basepaint,paint
thinner,some moth proofingsubstances,flammable
dust,or otherexplosiveor toxicvapors.
• Do notpick up hardor sharp objectssuch as
glass, nails,screws,coins, etc.
• Donotpickupanythingthatisburningor smoking,
suchas cigarettes,matches,or hotashes.
• Donotusewithoutfilters in place.
• Use onlyon dry,indoorsurfaces.
• Keepapplianceon a level surface.
• Donot carrythe vacuumcleanerwhile it is running.
• Brush may unexpectedlyrestart. Unplugfrom
outlet whencleaning or servicing.
SAVETHESE
INSTRUCTIONSFOR
FUTUREUSE
THISAPPLIANCEHAS
A POLARIZEDPLUG.
Toreducetheriskofelectricshock,thisappliancehasa
polarizedplug(onebladeiswiderthantheother).Thisplug
wiiifit ina polarizedoutletonlyone way.Iftheplugdoes
notfit fullyinthe outlet,reversethe plug.if it stilldoesnot
fit, contacta qualifiedelectricianto installa properoutlet.
Donotchangethe plugin anyway.
Thismodelisfor householduseonly.
800.237.7691

view
TurboBrush®
Height
Adjustment
Dial
FingertipPower
_gertipBrush
On/Off
Long
Hose
QuickRebaseTM
CordWrap
Brush
BrushWindow
Quick
CreviceTool
Telescoping
Wand
WandBase
FurnitureProtection
Guard Brush HandleRelease
Pedal
4www.bissell.com
FootHose
800.237.7691

Toolrequired:Phillipsscrewdriver
1, Slideupperhandleinto lower handleby
pushingforward.Inserttwo long screwsinto
the holesmarkedwith arrowsand tighten
bothuntil snug.
2,
3,
4,
Attachhoserack byplacingthe rack over
the centerback portionof the vacuum.
Besuretofeedthe powercordthrough
the hole inthe centerofthe rack.Line up
bothscrewsholesand usethe two smaller
screwsto attach.Tightenbothuntilsnug.
Attachhosebyplacingthe tabbedendinto
the lower left openingon cordedsideof the
vacuum.Makesurethe tab onthe hosecuff
andthe holein the vacuumlineup. Place
the workingend ofthe hoseintothe holeon
the sidewith the extensionwandguides.
Arrangethe hoseso it laysbetweenthe
vacuumandthe rack.
5, StoretheTurboBrushonthefrontofthehandle
byaligningthe slotonthebottomwiththetab
onthehandle.Snapintoplace.
6. Storethe CombinationBrushinthe slotshown.
7. Makesurethecrevicetool isinsidethe
extensionwand.Storetoolsonvacuumas
shown.
CAUTION:
Do not plug in your
vacuum cleaner until
you are familiar with
all instructionsand
operatingprocedures.
2a
2b
www.bissell,com 800,237.7691

Transportingyourcleaner
Usethe handleonthefronttocarrythe cleaner
orplacethe cleanerintheuprightpositionand
tipbacktorollonthe rearwheels.
Releasingthe powercord
Theupperand lowercordwrapsrotatetoallow
forquickand easyremovalofthepowercord.
Fingertip power switch
Thepowerbuttonis locatedat thetop ofthe
vacuumhandle.
Toturncleaneron,press_) buttononce.
ToturncleanerOFF,press(_) buttonagain.
Note:Therotatingbrushwill notturnon
unlesstheunitisin thereclinedposition
andthe brushswitchison.
Handle positions
Useyourfoottopullthehandlereleasepedal
backtoreclinethe vacuumcleaner.
Heightadjustment
Therearesevenheightsettingsavailablefor
variousfloorsurfaces.Turnthedialonthefootof
thecleanertothedesiredsetting.
Lowestsetting- Forlowpilecarpetorbare
floors.Topickupdebrisit maybenecessaryto
moveuponesetting.
Mediumsettings- Formediumpilecarpet.
Highsetting- Forhighpileandmostshagcarpet.
Note:Foroptimalcarpetcleaning
performance,adjusttothelowestpractical
setting.If yourcleanerisdifficulttopush,
adjusttothenexthighersetting.
Ifthedialisdifficulttoturn,tiltthecleaner
backslightlytotake theweightoffthefootwhile
turning.
6www.bissell.com
ATTENTION:
SomeBerbercarpetshavea
tendencytofuzzwith wear.
Repeatedstrokesinthesame
areamay aggravatethis
condition.Considersettingyour
cleanerona higherthan normal
setting for thistypeof carpet.
800.237.7691

Fingertip brush switch
Therotatingbrushisturnedonoroffusingthe
switchlocatedbelowthepowerswitchon the
topofthehandle.Thebrushwill startrotaUng
whentheunitisreclined.Thebrushshouldbe
onfor mostcarpetedfloors.Youmaywant to
turnthe brushofffor barefloor cleaningor other
delicatesurfaces.
ToturnthebrushON,press_buttononce.
ToturnthebrushOFF,press_) buttonagain.
Brushautoshut-offfeature
Whenyourcleanerisinthe uprightposition,the
brushwill notrotate.Thebrushwillrotateonly
whenthecleanerisinthereclinedpositionand
thebrushswitchison.
Microban®antimicrobialproduct protection
Microban®antimicrobialprotectionfightsthe
growthofodorcausingbacteria,moldand
mildewinyourvacuum.Itisbuilt-into key
componentsduringthemanufacturingprocess
andwon'twashoff orwearaway.Microban
providescontinuousantimicrobialproduct
protecUonfor theusefullifetimeofthe product
keepingyourvacuumcleanerandfresher.
Note:Thisshouldnot replacenormal
cleaningandmaintenanceprocedures.
Microban isa registered trademark of Microban Products Company.
www.bissell,com 800.237.7691

Using the tools
1 Make sure the cleaner is in the upright
position.
2. Removethe hosewand fromthe wand
base.This automaticallydivertsthe
suctionto the hose.Unwrapthe hosefrom
the cleaner.
3. Usethe hoseandwand aloneor attach
anyof thetools to the endof the hose
wand.
TurboBrush
Userotatingbrushactionfor smallareassuch
asstairsandupholstery.
Note:Pressgentlywhenusingthe
TurboBrushtogainmaximumcleaning.
Toomuchpressurecouldcausethebrush
tostoprotating.
ATTENTION:
Always place the vacuum
cleaneron the floor in its fully
upright position when using
tools.Placing thevacuum in
this position automatically
stopsthe rotatingbrush.
t
Combination brush
Uselongersoftbristlesfordusting.
Removelongbristleportionanduseshorterstiff
bristleswhenagitationisneededto removedebris.
Crevice tool
Useintightnarrowspaces
Telescopingextensionwand
Usewithdesiredattachmentfora longermac& To
extendthewand,twistthe collarto "Unlock" and
pushawayfromyou. Twistthe collarto "Lock"
to lockintoplace. Toretract,twist to unlock,pull
towardyouandtwistto relock.
Allavailableitemsmaynotbeincludedwithyour
model. Othertoolsare available;to order,please
referto page19.
i ¸8¸¸¸¸¸¸wwwbisselloom
,,qt,,,,,,D-
/ CAUTION:
Toavoid personal injury
and to prevent the cleaner
from falling when cleaning
stairs, always place it at
the bottomof the stairs.
800.237.7691

Emptyingthe dirtcontainer
Emptythedirtcontainerassoonasthedirt
reachesthe"Full" lineonthesideofthecontainer.
1. Pressthe releasebutton ontop ofthe
carryinghandleto removethe dirt container.
2, Choosean emptyingmethod.Method#2 is
recommendedfor allergysufferers.
Method#1 - holdthe dirt containerover
trashcan andpush the emptyingbuttonto
openthe bottom(2a).Closethe bottomafter
the dirt empties.
Method#2 - placea plasticbagovermebottom
ofthedirtcontainer.Pushthe emptyingbutton
throughtheplas'dctoopenthe bottom(2b).After
thedustsettles,closethe bottomandremove
thebagtodiscard.
3. Replacedirt containeroncleanerbyaligning
the bottomand pushingback untilit snaps
into place.
/ CAUTION:
Makesurevacuumcleaner
hasbeenswitchedoffand
unpluggedbeforeremoving
dirtcontainer.
2a
2b
www.bissell,com 800.237.7691

iintenance andcare
Cleaningthe dirt container
Additionalstepscanbetakento cleanthedirt
containerasnecessary.
1. Ensurethe dirt containerhasbeenemptied.
2.
3.
4.
5.
Removethe lower portionby pressingthe
front latchon the upperportionasshown.
Cleanthe screenwith acloth or soft brush
to removedustor debris.
Ifdesired,the lower dirt containermaybe
washedin warm water.Makesureit is
completelydry beforereassembling.Donot
put in dishwasher.
Toreassemble,holdthe carryhandleand
placethe upper portionintothe lower
portion,lining upthe front and backlatches.
Pushdownuntil bothlatchesclick intoplace.
Makesurethe dirt containeris securely
assembledbeforereplacingit on machine.
Cleaningthe pre-motorfilter
Thepre-motorfilter shouldbe checkedmonthly
andwashedasneededtomaintainperformance.
Moreor lessfrequent cleaningmaybe required
basedonindividualvacuuminghabitsandtypes
ofdebrispickedup.
1. Thefilter is locatedinthe doorlabeled
"Filter" behindthe dirt container.Pushthe
tab atthe top and swingthe doordownto
access.
2. Removefoamfilter andhold underrunning
waterto wash.Milddetergentmayalsobe
usedif desired.Wringexcesswaterfrom
filter.Air dry thoroughlybeforereplacing.
_/ iii _ !_iI i _i _
Z WARNING:
To reducethe risk of
electric shock,turn power
switch OFFand disconnect
polarizedplugfrom electri-
cal outlet beforeperform-
ingmaintenance or
troubleshootingchecks.
/ WARNING:
Donotoperatethecleanerwitha
damporwetfilter orwithoutall
thefilters inplace.
i¸ 10 www,bissell,com 800.237.7691

Maintenance andcare
Replacingthe HEPAfiltercartridge
The HEPAfiltercartridgeshouldbe
replacedif machineperformance is
noticeablydeclining. Moreor less
frequent replacingmaybe requiredbased
on individualvacuuminghabitsandtypes
of debrispicked up.
Note:Tohavethe benefitsofthe
Airetight®HEPASystem_youmust
usethe BISSELLHEPAfilter cartridge.
1. Removethe dirt container.
.
,
4.
Toremovethe HEPAfilter cartridge,
pushin onthefront ofthefilter doorto
unlatch. Lift upto access.
Tocheckor remove,unscrewthecenter
screw.
If necessary,replacethe usedHEPA
filter cartridgewith a newone.
Note:Toavoiddamagingthe HEPA
filter cartridgeandreducingits
filtration capabilities,becarefulnot
to touchthefilter material.TheHEPA
filter cartridgeisnotwashable.
,Toensureatightsealbesuretotighten
the filter cartridgescrewuntilsnug.
DONOTOVERTIGHTEN.
Makesurethefilter door latches
completely.
www.bissell=com 800,237.7691

iintenance andcare
Clearingclogs
Lowsuctionor poor pickup maybedueto
a clogin thevacuumcleaner.Ifyou notice
a changeinthe soundofthe motorora
reductionin thespinningactionin the dirt
container,checkfor a clog.
Ifthereisnosuctionor ifsuctionisreduced
atthehose,followthesestepstocheckfor
andcleartheclog:
.
2.
3.
.
.
6.
Turnpowerswitch off.
Unplugcleanerfrom electricaloutlet.
Checkthe pre-motorfilter andcleanas
necessary(seecleaningyourpre-motor
filter on page10).
Checkthe HEPAfilter cartridgeand
replaceif necessary(seereplacingthe
HEPAfilter cartridgeon page11).
Checkto seeif dirt containerisfull.
Emptyif needed.
Removelowerportionofdirt container.
Cleanthescreenandcheckcenter
tubesfor dirt accumulation.
.
8.
Whiledirtcontaineris removed,check
dirt inletfor clogs.
Removethehosefromthecleanerby
pushingonthetab.Straightenthehose
andcheckfor a clog.
Checkdiverterareaat backof machine
for diverterpositionandclogs.Whenthe
hosewandisremovedfromthe base,
the divertershouldbeupto theright.If a
clogisvisiblenearthediverter,theplas-
tic covermaybe removedto clearthe
clogbyremovingthe3 screwsasshown
(9b).
_ii ii iI i_i _ii i
i i i i
[A WARNING:
Toreducethe risk of
electricshock,turn power
switch offand discon-
nectpolarizedplugfrom
electricaloutletbefore
performingmaintenanceor
troubleshootingchecks.
Inlet
9a
9b
12 www.bissell.com 800,237.7691

Maintenance andcare
Clearingclogscontinued
Ifsuctionisnormalatthe hose,followthesesteps
tocheckfor andcleartheclogforfloorcleaning:
1. Checkdiverterareaatbackof machinefor
diverterposi'donandclogs.Whenthehose
wandisinsertedin the base,mediverter
shouldbetotheleft.Ifaclogisvisiblenearthe
diverter,theplasticcovermayberemovedto
cleartheclogbyremovingthe3 screws.
2, Checkthefoot hosefor clogs(1).Ifyouare
not abletotell from the outsideif aclog is
present,removethe bottom 3screwsfrom
the divertercoverto loosenandstraighten
the foot hose(2).
Removeanyclogsfoundand fully
reassemblethe cleanerbeforeattemptingto
checksuctionagainor usingthe cleaner.
Thermal motorprotection
Aninternalthermalprotectorhasbeendesigned
intoyourcleanertoprotectitfromoverheating.
Whenthethermalprotectoractivates,themain
vacuummotorwillstopoperating.Ifthishappens,
proceedasfollows.
1. Turnthe cleanerOFFand unplugfrom
electricaloutlet.
2,
3,
4.
Checkthe cleanerforthe sourceof
overheatingproblem(i.e.full dirt cup,dirty
filters or clog).
Fixthe problemby followingthe steps in the
maintenancesectionof the userguide.
Whenthe motorcoolsfor approximately
30 minutes,the thermal protector
automaticallyresetsandcleaningmay
continue.Ifthe cleanerwill not turn onor the
thermal protectorcontinuesto activate,your
cleanermayneedservicing.CallBISSELL
ConsumerServicesor visitthe websiteto
locatean authorizedServiceCenter.
Note:Thethermalprotectorcontrolsthe
mainvacuummotoronly,notthebrush
motor.If thethermalprotectoractivates,
the brushwillcontinuetooperatenormally;
however,therewill benosuction.
Diverter
FootHose
www.bissell.com 800.237.7691

iintenanceandcare
Brushreset
If somethingbecomeslodgedinthefootandthe
brushshutsoff,turnthe cleaneroffandunplug
fromtheoutlet.Removetheobstruction.The
brushwillautomaticallyresetwhenthe cleaner
ispluggedinandturnedbackon.
Brushmaintenance
Therotatingbrushshouldbecheckedregularly
foraccumulatingdebristhat mightreducethe
cleaningperformanceofyourvacuum.
1. Unplugcleanerfrom electricaloutlet.
2. Reclinethe handleandturn yourcleaner
overso the bottomsideis up.
3. Carefullycut awayanyvisible hair,fibers
or debrisfrom the brushroll.
Donotattempttodisassemblethevacuumfoot
ortoremovethe brushroll.If youfeel it needsto
becheckedor replaced,callBISSELLConsumer
Servicesorvisitthewebsitetolocatean
authorizedservicecenter.
/KCAUTION:
Toreducethe riskof injury
from movingparts,turnoff
thevacuumcleanerand
disconnectpowerplugfrom
electricaloutlet.
Belt maintenance
Thebrushbeltisdesignedtolasttheusefullife
ofthecleanerwhenusedaccordingto all
instructionsintheuserguideundernormal
householdconditions.Ifyoufeelthatitneedsto
becheckedorreplaced,callBISSELLConsumer
Servicesorvisitthewebsiteto locateanaulhorized
servicecenter.Donotattempttodisassemblethe
vacuumfoottochangethebelt.
14 www,bissell,com 800.237.7691

Maintenance and care
Changingthe lightbulb
1. Turnpowerswitch off.
2. Unplugcleanerfrom electricaloutlet.
3. Reclinehandlefor easieraccessto lightbulb
andremove2 screwsto lift off lens.
4, Removethe bulbby graspingbulbandpull-
ingstraightout of the socket.Installthe new
bulbby pushinggently intothe socketuntil
the bulb snapsinto place.
TurboBrushmaintenance
TheTurboBrushshouldbecheckedregularlyfor
clogsordebriswrappingaroundthebrush.
1. Removetool from hoseor front of vacuum.
2, Twistcollarso openingisat the top andlift
top coverto remove.
3. Removethe brushfrom the belt andclean
debris.
4. Replacethe brushinsidethe belt and place
endsintoslotson sidesas shown.
5, Repositiontop covermakingsureto line up
insidetab at the front with the openingon
the cover.Twistcollar untilopeningis at the
bottomto lock into place.
insideTab
5
www.bissell,com 800.237.7691

iubleshooting
Vacuumcleanerwon'tturnon
Possible causes
1. Powercordnotpluggedin
2. Blownfuse/trippedbreaker
3. Thermalprotectoractivated
4. Handlenotfully attached
iiiiiiiiiiiiiii
/ WARNING:
Toreducethe risk of electricshock,
turn power OFFanddisconnect
polarized plug from electricaloutlet
beforeperforming maintenanceor
troubleshooting.
Remedies
1. Checkelectricalplug
2. Check/replacefuseor resetbreaker
3. Allowcleanerto coolfor 30minutes,see
pg.13
4. Removehandleandreinstall
Brushnotrotating
Possible causes
1. Brushswitchturnedto"Off"
2. Vacuumisin uprightposition
3. Brushisjammed
4. Brushneedsto bereset
5, Handlenotfully attached
Remedies
1. Makesurebrushswitchis in "On"position
2. Reclinevacuumtooperatebrush
3. Removeobstructionordebris(pg.14),
unplugcleanertoresetbrush(pg.14)
4. Unplugcleanertoresetbrush(pg.14)
5. Removehandleandreinstall
Vacuumcleanerwon'tpick upor lowsuction
Possiblecauses
1. Incorrectheightsetting
2. Hosewandnotproperlypositioned
3. Dirtcontainernotinstalledproperly
4. Dirtcontainerfull
5. Clogin cleaner
6. Filtersaredirty
7. Hosenotproperlyattached
8. Fiberdoorandorgasketmissing
or notinstalledproperly
16 www.bissell.com
Remedies
1. Turndialtolowersetting
2. Makesurehosewandisfully seatedin
baseanddiverterisseatedtotheleft
3. Checkassemblydupperandlowerportions,
correctlypositionandsnapintoplace
4. Emptydirtcontainer
5. Followinstructionsonpg.12-13for
clearingclogs
6. Checkand cleanfoamfilter,checkand
replaceHEPAfilter cartridgeif needed
7, Makesurehosecollaris twistedto
lock position
8. Checkfilter doorandgasketto verify.
800,237.7691

Vacuumcleanerisdifficulttopush
Possible causes
1. Incorrectheightsetting
Remedies
1. Turndialtohighersetting
Visibledustescapingfrom cleaner
Possible causes
1. Filterdoorandorgasketmissing
or notinstalledproperly
2. Foamfiltermissingor notinstalledproperly
3. HEPAfiltercartridgemissingor notinstalledproperly
Remedies
1. Checkfilterdoorandgasket
2, Checkfoamfilterfor correctinstallation
3. CheckHEPAfiltercartridgefor
correctinstallation
4. Dirtcontainernotinstalledproperly 4.
5. Dirtcontainernotassembledproperly 5.
6. Hosenotinstalledproperly 6.
Makesuredirtcontaineris correctly
positionedandsnappedintoplace
Checkscreen,upperandlowerportionsof
thedirtcontainerfor properassembly
Makesurehosewandisfully seatedin
base,andthatthehoseisassembled
correctlyto meunit.Seepage5.
Alsomakesurefoothoseisproperly
attachedto diverterarea
7. Holeor crackin hose 7. Checkhosefor holesor cracksandreplace
if needed
Other maintenance or service not included in the manual should be performed by an
authorized service representative.
Thankyoufor selecting a BISSELLproduct.
Pleasedonotreturnthisproducttothestore.]
ForanyqueslJonsorconcerns,BISSELLishappytobeofservice.
Contactusdirectlyat 1-800-237-7691.
www bissell corn 800.237.7691

ConsumerServices
For information about repairs or replacement parts, or questions about your warranty,call:
BISSELLConsumerServices
1-800-237-7691
Monday - Friday 8 a.m. 10 p.m. EST
Saturday 9 a.m. 8 p.m. EST
Orwrits:
BISSELLHOMECARE,iNC
POBox3606
GrandRapidsMI49501
ATrN:ConsumerServices
Orvisitthe BISSELLwebsite- www,bissell,com
WhencontactingBISSELL,havemodelnumberofcleaneravailable.
PleaserecordyourModelNumber:
PleaserecordyourPurchaseDate:
NOTE:Pleasekeepyouroriginalsalesreceipt.It providesproofofdateofpurchaseintheevent
ofa warrantyclaim.SeeWarrantyonpage20fordetails.
Pleaseregisteryournew BISSELLproductat
www,bissell.com/productregistration
18 www,bissell,com 800,237,7691

Replacement partsandaccessories
Youmaypurchasepartsfromyourretailer,bycallingBISSELLConsumerServicesorby
visitingourwebsite.Belowisalistofcommonreplacementparts*.Whilenotall ofthese
partsmayhavecomewithyourspecificmodel,theyareavailablefor purchaseifdesired.
Pleasenote,allattachmentsmaynotstoreonboardyourvacuum.
Item PartNo. PartName
1 48G7 HEPAFilterCartridge
2 63M7 FoamFilter
3 203-1362 TurboBrush
4 203-1364 TelescopingWand
5 203-1365 CombinationBrush
6 203-1363 CreviceTool
7 203-1382 ContourTool
8 203-1485 Hose
9 203-1469 LightBulb
*Not all parts are included with every model. Other tools may be available.
Contact BISSELLConsumer Services or visit our website for more detail.
Earn Rewards Points!
Toqualify you for discounts,rebates, and other BISSELLperks,
Visit www,bissell,com/rewards to learn more,
www.bissell.com 800.237.7691
_i ii_iI

-BISSELLHealthy Home VacuumTM
Thiswarranty givesyou specific legalrights,and you may alsohaveother rights which may varyfrom stateto
state. Ifyou needadditional instructionregarding this warrantyor havequestionsregardingwhat it may cover,
pleasecontact BISSELLConsumerServicesby E-mail,telephone,or regularmail as described below.
LimitedFiveYearWarranty
Subjectto the *EXCEPTIONSAND EXCLUSIONSidentified below,uponreceipt ofthe product BISSELL
Homecare,Inc.will repair or replace(with newor remanufacturedcomponentsor products),at BISSELL'soption,
free of chargefrom the date of purchaseby the original purchaser,for five yearson any defectiveor
malfunctioning part.
See information belowon "If your BISSELLproductshould requireservice".
Thiswarrantyappliesto productusedfor personal,andnotcommercialor rentalservice.Thiswarrantydoesnotapply
tofansor routinemaintenancecomponentssuchasfilters,or brushes.Damageormalfunctioncausedby negligence,
abuse,neglect,unauthorizedrepair,or anyotherusenot in accordancewith the User'sGuideisnotcovered.
If your BISSELLproductshould require service:
ContactBISSELLConsumerServicesto locateaBISSELLAuthorizedServiceCenterinyourarea.
Ifyouneedinformationaboutrepairsor replacementparts,or if youhavequestionsaboutyourwarranty,
contactBISSELLConsumerServices.
Websiteor E-mail:
www.bissell.com
Usethe "CustomerService"tab.
OrCall:
BISSELLConsumerServices
1-800-237-7691
Monday- Friday8 a.m.- 10p.m.ET
Saturday9 a.m.- 8 p.m.ET
Orwrite:
BISSELLHomecare,Inc.
P0Box3606
GrandRapidsM149501
ATTN:ConsumerServices
BlSSELLHOMECARE,INC.ISNOTLIABLEFORINCIDENTALORCONSEOUENTIALDAMAGESOFANYNATURE
ASSOCIATEDWITHTHEUSEOFTHISPRODUCT.BlSSELL'SLIABILITYWILLNOTEXCEEDTHEPURCHASEPRICE
OFTHEPRODUCT.
Some statesdo notallow the exclusionor limitationof incidentalor consequentialdamages,sothe above
limitationor exclusionmay notapplyto you.
*EXCEPTIONSANDEXCLUSIONSFROMTHETERMSOFTHELIMITEDWARRANTY
THISWARRANTYIS EXCLUSIVEANDIN LIEUOFANYOTHERWARRANTIES
EITHERORALORWRITTEN.ANY IMPLIEDWARRANTIESWHICHMAYARISEBY Bi
OPERATIONOFLAW,INCLUDINGTHEIMPLIEDWARRANTIESOFMERCHANTABILITY
ANDFITNESSFORA PARTICULARPURPOSE,ARELIMITEDTO THEFIVEYEAR Ell
DURATIONFROMTHEDATEOFPURCHASEASDESCRIBEDABOVE.
Somestatesdo notallow limitationson howlong an impliedwarranty lasts,so
the abovelimitation may notapply to you.
20 www.bissell.com
@2009 BISSELLHomecare,lee
Grand Rapids,Michigan
AI]fights reserved.Printedin China
PartNumber 110-41O0
Rev 5/09
Visitour websJteat:
www.bLsseH.com
800.237.7691