Bissell DEEPCLEAN ESSENTIAL 8852 Series User manual

©2013 BISSELL Homecare, Inc
Grand Rapids, Michigan
All rights reserved. Printed in China
Part Number 160-2968 Rev 08/13
For information about repairs or replacement parts,
or questions about your warranty, call:
BISSELL Consumer Care 1-800-237-7691
Monday – Friday 8 am - 10 pm ET
Saturday 9 am - 8 pm ET
Sunday 10 am - 7 pm ET
Or visit the BISSELL website www.bissell.com
4.
6.
5.
Phillips head screw driver is needed for assembly
Color and pack-ins vary by model
Package Cnts
1 Machine Base & Tank-in-Tank System
2 Upper Handle
3 5 screws (2 long, 3 short) - taped to handle
4 Tough Stain Tool
5 Upper Hose Assembly
6 Lower Hose Assembly
WARNING
Refer to the enclosed user guide for complete
instructions and important safety notices.
DEEPCLEAN
ESSENTIAL™
QUICK START GUIDE
8852 Series
1 2 3
1. While pressing the trigger, make one slow
forward wet pass and another one back
2. Release the trigger and make one slow forward
and backward pass over the same area. Repeated
passes will help aid in dry time
3. Continue passes until cleaning area is complete
4. When the formula and water solution is empty,
it is time to empty the dirty water tank
5. Empty dirty water by removing tank from base
of machine. Carry to utility sink to dispose of
water. Unlatch top of tank and pour dirty water
through rectangle shaped opening in corner
6. Refill as needed, following steps 4 & 5 under
“Before you begin cleaning”
1. Make sure handle of machine is locked in
upright position and the ReadyTools™ Dial is
turned towards Tools.
2. Attach the cleaning tool to the end of the hose
3. Clean by pressing the trigger to spray solution
onto the area to be cleaned
4. Slowly scrub the tool back and forth over the
soiled surface
5. Tilt the tool forward and release spray trigger
to suction liquid
Carpet Cleaning
Cleaning with Attachments
We c’t wait to ar from y!
Rate this product and let us (and millions
of your closest friends) know what you think!
www.BISSELL.com
4
5 6

1. Slide handle assembly onto
lower body and secure with two
long screws.
2. Attach upper hose rack to back
of handle assembly by guiding
the hook up into slot location and
pressing firmly upward until it is
seated flush with the back of the
machine. Secure 1 short screw
through the hole in the bottom
of the upper hose and cord rack.
3. Attach lower hose rack by
guiding the hook up into slot
location and pressing firmly
upward until it is seated flush
with the back of the machine.
Secure 2 short screws through
holes on either side of the
bottom hose and cord rack.
4. Attach Tough Stain tool to
end of hose.
5. Wrap flex hose around hose and
cord rack (as shown) and secure
it into notched out holder. Wrap
cord around opposite side of hose
and cord rack.
6. Place tank in the bottom of
the machine.
YOUR ASSEMBLY IS NOW COMPLETE. For complete user's guide, visit www.BISSELL.com
1. Move furniture to another area
if cleaning an entire room
2. Remove large dirt and debris
from carpet (See User’s Guide for
more details)
3. Pre-treat spots & stains and
heavy traffic areas (optional –
see User’s Guide)
4. Fill the clean water tank
4a. Unlatch the top by lifting up on
the latch at the back side of the tank.
4b. Remove the top
4c. Fill with hot tap water leaving
space at the top for formula (do not
boil or microwave water). Pour 2.5
ounces of formula into the heavy duty
bladder (fill the included measuring
cup to the indicated fill line).
4d. Re-attach top by hooking the
front of the lid in then locking in the
latch on the back side of the tank.
5. Plug into outlet, and turn the power
switch on
NOTE: Heatwave Technology™ helps
keep hot water hot while the machine
is in use. Simply turn the machine on
to activate Heatwave Technology.
Before you begin cleaningAssembly
1. 1b.
2. 3.
5.
5.
4c.
4b.
4d.