Bissell Symphony User manual

BISSELL Confidential
DO NOT USE VINEGAR OR ANY OTHER SOLUTION OTHER THAN WATER OR BISSELL STEAM MOP
DEMINERALIZED SCENTED WATERS IN THE TANK.
1) Is the water tank empty? If so, fill the tank and attempt to steam.
2)
3) Make sure a steam setting is selected by pushing a steam level button.
Symphony Vac & Steam
No Steam
(
about 30 seconds). Wait until the light goes solid and attempt to steam.

BISSELL Confidential
to use the steam. If one of them is not lit,
4) Make sure you are pushing the trigger on the handle to steam.
5) Make sure the water filter** is installed properly.
ter.
A filter is required for this machine, just not a water filter, it is optional.
There should be no gap between the filter and the machine when it is
installed properly.
the machine will not steam.

BISSELL Confidential
6) Has a new filter been installed? If so, hold the trigger down to allow the filter to fill up with
water. It should then start steaming.
7) Take the foot off the machine, remove the foot tray and also the pad and ream the
steam tip on the foot as well as the foot tray with a paperclip to remove any
obstructions.

BISSELL Confidential
8) If the machine still has no steam after troubleshooting has been completed,
please refer the consumer to the nearest ASC. If there is not one nearby, set up
cut cord RA if the machine is still under warranty. Set up replacement per RA
Dest. Guide. Be sure to note issue in detail.