BJ Live SHX Stars User manual

c.Mare de Déu del Coll, 70,Local|08023|Barcelona|Spain|t.+34 93 285 04 37|fax + 34 93 553 56 34| [e-mail] | www.bjliveat.com
BJ-EX43 SHX Stars
Instructions manual

Instructions manual
BJ-EX41 SHX Stars
BJ-EX41 SHX Stars
Page 2
1_Components of SHX Stars
Star projector Enabler Socket+
2_Configuration of Projector and Enabler Socket+
Remove the product's packaging in a suitable way
Please read the whole manual to familiarise yourself with the characteristics
before using the device.
1.1_Contents
Unpack the products from their boxes and check the contents. The star projector
should contain a 6V (DC) adapter, a UK-European adapter and instruction manual,
with the enabler socket+ they should be a 3.5 mm male jack-jack cable and an
instruction manual. It is recommended to keep the boxes for the duration of the
warranty period in case you need to use them again. If you want to dispose of the
packaging, please do so responsibly.
If you find any damage or any material is missing when you unpack the kit, please
contact your distributor for assistance. Any damage or breakage caused during
transport must be notified within three days of receipt.
The star projector can only be used where there is a power socket.

Instructions manual
BJ-EX41 SHX Stars
BJ-EX41 SHX Stars
Page 3
1.2_Star Projector Specifications
Transformer 240V (AC) 50Hz to 6V (DC)
2_ Instructions for use
The star projector is ready for use so you just have to connect the adapter and then the
adapter to the socket plus+ so it can be used with the SHX system.
The Enabler Socket+ used for the SHX Stars should have the blue selector in
position 3 and the yellow selector in position 0 (Latch operation mode)
The configuration of the Enabler Socket+ is preset in the SHX control software:
Act code 31
On code 77
Off code 61

Instructions manual
BJ-EX41 SHX Stars
BJ-EX41 SHX Stars
Page 4
3_Cleaning and Maintenance
Clean the surface of the star projector regularly to ensure maximum visual effect and
good hygiene. It must be disconnected from the power supply before cleaning. Clean
using soapy water and a soft cloth (wrung out). Never use chemical or abrasive
products for cleaning. Thoroughly dry the surface and wait one hour to connect to the
power supply.
4_Regular Inspections
The product should always be used under adult supervision.
A periodic inspection of the devices is recommended; if any faults are detected contact
your distributor for assistance.
5_Safety Guidelines
Correct and supervised use of this equipment will ensure it can be used for a long time.
The star projector is designed to create an optical effect, it is not designed for direct
use with users so it should never be shaken, overturned or hit with hard objects.
IMPORTANT: Never leave users without adult supervision while using this product.
Suitable for use in therapies with several users simultaneously.