Epson PowerLite 535W Specification sheet

Quick Setup
Before using the projector, make sure you read the safety instructions in the
online User’s Guide.
Connect the projector
Choose from the following connections. See the sections below or the online
User’s Guide for details.
Computer
USB cable
HDMI cable
VGA cable
Stereo mini cable
USB port
Connect the square end of a USB cable to the projector’s USB-B (square) port.
Connect the flat end of the cable to any USB port on your computer.
Windows®XP or later: After turning on the projector, follow the on-screen
instructions to install the Epson®USB Display software (EMP_UDSE.EXE; only
on first connection). If the software screen does not display automatically,
open My Computer or Computer, then double-click EPSON_PJ_UD.
OS X 10.5.8 or higher: After turning on the projector, the setup folder for
USB Display appears in the Finder. Double-click USB Display Installer and
follow the on-screen instructions to install the Epson USB Display software
(only on first connection).
Computer port
Connect one end of a VGA cable to the projector’s Computer1 or
Computer2 ports, and the other end to your computer’s monitor port.
If you are using a laptop, switch it to external display (see “Troubleshooting”).
You can also connect an audio cable.
HDMI port
Connect one end of an HDMI cable to the projector’s HDMI port and the other
end to an HDMI port on your computer.
Wired network
You can connect the projector to your network using an Ethernet cable. See
“Project over a wired network” for instructions.
Video device
Connect multiple video devices and use the Source Search button on the
projector or remote control to switch between them.
Component video to VGA cable
HDMI cable
RCA video cable (composite video)
S-Video cable
RCA Audio cable
Camera, USB device, or Epson DC-06 document camera
Connect a digital camera, USB flash drive, USB storage device, or Epson DC-06
document camera to the projector’s USB-A (flat) port.
If you connect a digital camera, USB flash drive, or USB storage device, you can
use the projector’s PC Free feature. You can also connect other Epson document
cameras to the projector. See the online User’s Guide for details.
Turn on your equipment
1Turn on your computer or video source.
2Plug in the projector. The power light on the projector turns blue.
3
Press the power button on the projector or remote control. The
projector beeps, and the Status light flashes blue and then stays on.
Note: To shut down the projector, press the power button twice, then
unplug it. You don’t have to wait for the projector to cool down.
4The default language of the menu system is English. To select another
language, press the Menu button on the projector or remote control.
Select Extended and press . Select Language and press .
Select your language and press .Press the Menu button to exit
the menu system.
Adjust the image
1If you don’t see an image, press the Source Search button on the
projector or the remote control to select the image source.
Note: If you still see a blank screen or have other display problems, see
the troubleshooting tips on the back of this sheet.
2To raise the image, press the foot release button and lift the front of the
projector. Release the button to lock the foot in position.
3Press the Wide or Tele buttons on the projector to reduce or enlarge the
image.
4Turn the focus ring to sharpen the image.
5If your image looks like or , you may have placed the projector
off to one side of the screen at an angle. Place the projector directly in
front of the center of the screen, facing the screen squarely. If you
can’t move the projector, press the or button on the projector to
open the keystone correction menu then use the Wide or Tele buttons to
correct the image.
6If your image looks like or , you can press the or
button on the projector to correct it.
Using the remote control
Make sure the batteries are installed as shown (two AA batteries).
Choose which
source to display
Turn projector
on and off
Access projector
menus
Turn off projector
display Get solutions to
common problems
Navigate projector
menus
Switch between computer and
interactive pen
For more information on using the remote control, see the online User’s
Guide.
Project wirelessly from a
computer
Follow the steps here to connect the projector over a wireless network. You
will need the optional wireless LAN module (part number V12H418P12).
1
To install the optional wireless LAN module, first remove the screw as
shown.
2Connect the wireless LAN module to the USB-A (flat) port.
3To configure your projector for wireless projection, do one of the
following:
•If you’re using the optional Quick Wireless Connection USB key
(Windows only, part number V12H005M09), press the LAN button on
the remote control. When you see SSID and IP address information
on the screen, remove the wireless LAN module and connect the
key to the projector’s USB-A port. Look for the displayed message,
remove the key, and connect it to a USB port on your computer.
Follow your computer’s on-screen instructions to install the driver,
then reconnect the wireless LAN module to the projector’s USB-A
port. For details, see the online User’s Guide.
•If you’re not using the key, continue with step 4.
PowerLite®520/525W/530/535W
4127945 Rev.0
1-F C
4127945 Rev.0
1-F M
4127945 Rev.0
1-F Y
4127945 Rev.0
1-F K

Quick Setup
Before using the projector, make sure you read the safety instructions in the
online User’s Guide.
Connect the projector
Choose from the following connections. See the sections below or the online
User’s Guide for details.
Computer
USB cable
HDMI cable
VGA cable
Stereo mini cable
USB port
Connect the square end of a USB cable to the projector’s USB-B (square) port.
Connect the flat end of the cable to any USB port on your computer.
Windows®XP or later: After turning on the projector, follow the on-screen
instructions to install the Epson®USB Display software (EMP_UDSE.EXE; only
on first connection). If the software screen does not display automatically,
open My Computer or Computer, then double-click EPSON_PJ_UD.
OS X 10.5.8 or higher: After turning on the projector, the setup folder for
USB Display appears in the Finder. Double-click USB Display Installer and
follow the on-screen instructions to install the Epson USB Display software
(only on first connection).
Computer port
Connect one end of a VGA cable to the projector’s Computer1 or
Computer2 ports, and the other end to your computer’s monitor port.
If you are using a laptop, switch it to external display (see “Troubleshooting”).
You can also connect an audio cable.
HDMI port
Connect one end of an HDMI cable to the projector’s HDMI port and the other
end to an HDMI port on your computer.
Wired network
You can connect the projector to your network using an Ethernet cable. See
“Project over a wired network” for instructions.
Video device
Connect multiple video devices and use the Source Search button on the
projector or remote control to switch between them.
Component video to VGA cable
HDMI cable
RCA video cable (composite video)
S-Video cable
RCA Audio cable
Camera, USB device, or Epson DC-06 document camera
Connect a digital camera, USB flash drive, USB storage device, or Epson DC-06
document camera to the projector’s USB-A (flat) port.
If you connect a digital camera, USB flash drive, or USB storage device, you can
use the projector’s PC Free feature. You can also connect other Epson document
cameras to the projector. See the online User’s Guide for details.
Turn on your equipment
1Turn on your computer or video source.
2Plug in the projector. The power light on the projector turns blue.
3
Press the power button on the projector or remote control. The
projector beeps, and the Status light flashes blue and then stays on.
Note: To shut down the projector, press the power button twice, then
unplug it. You don’t have to wait for the projector to cool down.
4The default language of the menu system is English. To select another
language, press the Menu button on the projector or remote control.
Select Extended and press . Select Language and press .
Select your language and press .Press the Menu button to exit
the menu system.
Adjust the image
1If you don’t see an image, press the Source Search button on the
projector or the remote control to select the image source.
Note: If you still see a blank screen or have other display problems, see
the troubleshooting tips on the back of this sheet.
2To raise the image, press the foot release button and lift the front of the
projector. Release the button to lock the foot in position.
3Press the Wide or Tele buttons on the projector to reduce or enlarge the
image.
4Turn the focus ring to sharpen the image.
5If your image looks like or , you may have placed the projector
off to one side of the screen at an angle. Place the projector directly in
front of the center of the screen, facing the screen squarely. If you
can’t move the projector, press the or button on the projector to
open the keystone correction menu then use the Wide or Tele buttons to
correct the image.
6If your image looks like or , you can press the or
button on the projector to correct it.
Using the remote control
Make sure the batteries are installed as shown (two AA batteries).
Choose which
source to display
Turn projector
on and off
Access projector
menus
Turn off projector
display Get solutions to
common problems
Navigate projector
menus
Switch between computer and
interactive pen
For more information on using the remote control, see the online User’s
Guide.
Project wirelessly from a
computer
Follow the steps here to connect the projector over a wireless network. You
will need the optional wireless LAN module (part number V12H418P12).
1
To install the optional wireless LAN module, first remove the screw as
shown.
2Connect the wireless LAN module to the USB-A (flat) port.
3To configure your projector for wireless projection, do one of the
following:
•If you’re using the optional Quick Wireless Connection USB key
(Windows only, part number V12H005M09), press the LAN button on
the remote control. When you see SSID and IP address information
on the screen, remove the wireless LAN module and connect the
key to the projector’s USB-A port. Look for the displayed message,
remove the key, and connect it to a USB port on your computer.
Follow your computer’s on-screen instructions to install the driver,
then reconnect the wireless LAN module to the projector’s USB-A
port. For details, see the online User’s Guide.
•If you’re not using the key, continue with step 4.
PowerLite®520/525W/530/535W
4127945 Rev.0
1-F C
4127945 Rev.0
1-F M
4127945 Rev.0
1-F Y
4127945 Rev.0
1-F K

8
If your network assigns addresses automatically, turn on the DHCP
setting. If not, turn off the DHCP setting and enter the projector’s IP
Address, Subnet Mask, and Gateway Address, as needed. Then
press Esc.
9
To prevent the IP address from appearing on the network standby screen,
set the IP Address Display setting to Off.
10
When you are finished, select Complete and press , then press
again to save your settings.
11 Press the Menu button to exit the menu system.
12 See “Install network software” for additional instructions.
Install network software
Computer
Install the EasyMP®Network Projection software on each computer that will
project over the network. Use the CD labeled Epson Projector Software to
install the program.
For instructions on installing and using your network software, click the icon
on your desktop to access the online EasyMP Network Projection Operation
Guide (requires an Internet connection). If you don’t see the EasyMP Network
Projection Guide icon, you can install it from the projector CD or go to the
Epson website, as described on the right.
To monitor and control your projector over the network, download and install
the EasyMP Monitor software and manual from the Epson support web site.
You can install a link to the downloads page from the projector CD or go to the
Epson website, as described on the right.
Mobile device
To project from an iOS or Android™ device,
download and install the Epson iProjection™ app.
Visit epson.com/projectorapp (U.S.) or
epson.ca/projectorapp (Canada) for
more information.
Troubleshooting
If you see a blank screen or the No signal message after turning on your
computer or video device, check the following:
•Make sure the Status light on the projector is blue and not flashing.
•Press the Source Search button on the projector or the remote control to
switch to the correct image source, if necessary.
•If you’re using a Windows laptop, press the function key on your keyboard
that lets you display on an external monitor. It may be labeled CRT/LCD or
have an icon such as . You may have to hold down the Fn key while
pressing it (such as Fn + F7). Wait a moment for the display to appear.
•If you’re using a Mac laptop, open System Preferences and select
Displays. Click the Arrangement tab and select the Mirror Displays
checkbox.
4
Attach the wireless LAN module cover and secure it using the screw you
removed.
5Press the Menu button on the remote control, select the Network menu,
and press .
6Choose Network Configuration and press .
7Select the Wireless LAN menu and press .
8Choose Connection Mode, press , select Quick (for a direct
connection to a computer, tablet, or smartphone) or Advanced (for
a connection to a router or access point), then press again. When
you’re finished, press Esc to return to the Wireless LAN menu.
9If you chose the Advanced connection mode, select Search Access Point,
press and select your network from the list. If your network does not
appear on the list, select SSID, press and enter your network name
(SSID) on the screen that appears.
•To select a number or character, use the arrow buttons on the remote
control to highlight it, then press .
•To switch between uppercase and lowercase letters, select CAPS and
press .
•To change the displayed symbols, select SYM1 or SYM2 and
press .
When you’re finished entering the SSID, select Finish and press .
10 If you chose the Advanced connection mode, select IP settings and
press .
If your network assigns addresses automatically, turn on DHCP. If not,
turn off DHCP and enter the projector’s IP Address, Subnet Mask, and
Gateway Address, as needed.
To enter numbers, use the arrow buttons on the remote control to
highlight a number, then press . When you’re finished entering
an address, highlight Finish, then press . Press Esc.
11 To prevent the SSID and IP address from appearing on the network
standby screen, set the SSID Display and IP Address Display
settings to Off.
EPSON, PowerLite, and EasyMP are registered trademarks, Epson iProjection is a trademark, and EPSON Exceed
Your Vision is a registered logomark of Seiko Epson Corporation. PrivateLine is a registered trademark of Epson
America, Inc.
Mac and OS X are trademarks of Apple Inc., registered in the U.S. and other countries.
General Notice: Other product names used herein are for identification purposes only and may be trademarks
of their respective owners. Epson disclaims any and all rights in those marks.
This information is subject to change without notice.
© 2014 Epson America, Inc., 8/14
Printed in XXXXXX CPD-41698
12 When you’re finished selecting settings in the Wireless LAN menu,
press Esc.
13 If you are connecting the projector to a secure network, select the
Security menu and press . Then select settings and press Esc when
you’re finished.
14 Select Complete and press, then select Yes and pressagain to
save your settings.
15 See “Install network software” for additional instructions.
Project over a wired
network
Follow the steps here to configure your projector for your wired network using
the projector’s menu system.
1 Plug in and turn on the projector.
2
Press the Menu button on the remote control, select the Network menu,
and press .
3 Select Network Configuration and press .
4 Select the Basic menu and press .
5
Select the Projector Name setting and enter a name (up to 16 characters
long) to identify your projector over the network.
Use the displayed keyboard to enter characters. Press the arrow buttons
on the remote control to highlight the characters and press to select
them.
Note: See the online User’s Guide for information on adding passwords.
6 Select the Wired LAN menu and press .
7 Choose IP Settings and press .
Where to get help
Manuals
For more information about using the projector, click the icons on your
desktop to access the online manuals (requires an Internet connection). If you
don’t have icons to the manuals, you can install them from the projector CD or
go to the Epson website, as described below.
Telephone support services
To use the Epson®PrivateLine®Support service, call [phone]. This service
is available for the duration of your warranty period. You may also speak with
a support specialist by calling [phone] (U.S.) or [phone] (Canada).
Support hours are 6 am to 8 pm, Pacific Time, Monday through Friday, and 7
am to 4 pm, Pacific Time, Saturday. Days and hours of support are subject to
change without notice. Toll or long distance charges may apply.
Internet support
Visit epson.com/support (U.S.) or epson.ca/support (Canada) for solutions
to common problems. You can download utilities and documentation, get
FAQs and troubleshooting advice, or e-mail Epson.
Registration
Register today to get product updates and exclusive offers. You can use the CD
included with your projector or register online at epson.com/webreg.
Optional accessories
For a list of optional accessories, see the online User’s Guide.
You can purchase screens or other accessories from an Epson authorized
reseller. To find the nearest reseller, call 800-GO-EPSON (800-463-7766). Or you
can purchase online at epsonstore.com (U.S. sales) or epson.ca (Canadian
sales).
4127945 Rev.0
1-B C
4127945 Rev.0
1-B M
4127945 Rev.0
1-B Y
4127945 Rev.0
1-B K

8
If your network assigns addresses automatically, turn on the DHCP
setting. If not, turn off the DHCP setting and enter the projector’s IP
Address, Subnet Mask, and Gateway Address, as needed. Then
press Esc.
9
To prevent the IP address from appearing on the network standby screen,
set the IP Address Display setting to Off.
10
When you are finished, select Complete and press , then press
again to save your settings.
11 Press the Menu button to exit the menu system.
12 See “Install network software” for additional instructions.
Install network software
Computer
Install the EasyMP®Network Projection software on each computer that will
project over the network. Use the CD labeled Epson Projector Software to
install the program.
For instructions on installing and using your network software, click the icon
on your desktop to access the online EasyMP Network Projection Operation
Guide (requires an Internet connection). If you don’t see the EasyMP Network
Projection Guide icon, you can install it from the projector CD or go to the
Epson website, as described on the right.
To monitor and control your projector over the network, download and install
the EasyMP Monitor software and manual from the Epson support web site.
You can install a link to the downloads page from the projector CD or go to the
Epson website, as described on the right.
Mobile device
To project from an iOS or Android™ device,
download and install the Epson iProjection™ app.
Visit epson.com/projectorapp (U.S.) or
epson.ca/projectorapp (Canada) for
more information.
Troubleshooting
If you see a blank screen or the No signal message after turning on your
computer or video device, check the following:
•Make sure the Status light on the projector is blue and not flashing.
•Press the Source Search button on the projector or the remote control to
switch to the correct image source, if necessary.
•If you’re using a Windows laptop, press the function key on your keyboard
that lets you display on an external monitor. It may be labeled CRT/LCD or
have an icon such as . You may have to hold down the Fn key while
pressing it (such as Fn + F7). Wait a moment for the display to appear.
•If you’re using a Mac laptop, open System Preferences and select
Displays. Click the Arrangement tab and select the Mirror Displays
checkbox.
4
Attach the wireless LAN module cover and secure it using the screw you
removed.
5Press the Menu button on the remote control, select the Network menu,
and press .
6Choose Network Configuration and press .
7Select the Wireless LAN menu and press .
8Choose Connection Mode, press , select Quick (for a direct
connection to a computer, tablet, or smartphone) or Advanced (for
a connection to a router or access point), then press again. When
you’re finished, press Esc to return to the Wireless LAN menu.
9If you chose the Advanced connection mode, select Search Access Point,
press and select your network from the list. If your network does not
appear on the list, select SSID, press and enter your network name
(SSID) on the screen that appears.
•To select a number or character, use the arrow buttons on the remote
control to highlight it, then press .
•To switch between uppercase and lowercase letters, select CAPS and
press .
•To change the displayed symbols, select SYM1 or SYM2 and
press .
When you’re finished entering the SSID, select Finish and press .
10 If you chose the Advanced connection mode, select IP settings and
press .
If your network assigns addresses automatically, turn on DHCP. If not,
turn off DHCP and enter the projector’s IP Address, Subnet Mask, and
Gateway Address, as needed.
To enter numbers, use the arrow buttons on the remote control to
highlight a number, then press . When you’re finished entering
an address, highlight Finish, then press . Press Esc.
11 To prevent the SSID and IP address from appearing on the network
standby screen, set the SSID Display and IP Address Display
settings to Off.
EPSON, PowerLite, and EasyMP are registered trademarks, Epson iProjection is a trademark, and EPSON Exceed
Your Vision is a registered logomark of Seiko Epson Corporation. PrivateLine is a registered trademark of Epson
America, Inc.
Mac and OS X are trademarks of Apple Inc., registered in the U.S. and other countries.
General Notice: Other product names used herein are for identification purposes only and may be trademarks
of their respective owners. Epson disclaims any and all rights in those marks.
This information is subject to change without notice.
© 2014 Epson America, Inc., 8/14
Printed in XXXXXX CPD-41698
12 When you’re finished selecting settings in the Wireless LAN menu,
press Esc.
13 If you are connecting the projector to a secure network, select the
Security menu and press . Then select settings and press Esc when
you’re finished.
14 Select Complete and press, then select Yes and pressagain to
save your settings.
15 See “Install network software” for additional instructions.
Project over a wired
network
Follow the steps here to configure your projector for your wired network using
the projector’s menu system.
1 Plug in and turn on the projector.
2
Press the Menu button on the remote control, select the Network menu,
and press .
3 Select Network Configuration and press .
4 Select the Basic menu and press .
5
Select the Projector Name setting and enter a name (up to 16 characters
long) to identify your projector over the network.
Use the displayed keyboard to enter characters. Press the arrow buttons
on the remote control to highlight the characters and press to select
them.
Note: See the online User’s Guide for information on adding passwords.
6 Select the Wired LAN menu and press .
7 Choose IP Settings and press .
Where to get help
Manuals
For more information about using the projector, click the icons on your
desktop to access the online manuals (requires an Internet connection). If you
don’t have icons to the manuals, you can install them from the projector CD or
go to the Epson website, as described below.
Telephone support services
To use the Epson®PrivateLine®Support service, call [phone]. This service
is available for the duration of your warranty period. You may also speak with
a support specialist by calling [phone] (U.S.) or [phone] (Canada).
Support hours are 6 am to 8 pm, Pacific Time, Monday through Friday, and 7
am to 4 pm, Pacific Time, Saturday. Days and hours of support are subject to
change without notice. Toll or long distance charges may apply.
Internet support
Visit epson.com/support (U.S.) or epson.ca/support (Canada) for solutions
to common problems. You can download utilities and documentation, get
FAQs and troubleshooting advice, or e-mail Epson.
Registration
Register today to get product updates and exclusive offers. You can use the CD
included with your projector or register online at epson.com/webreg.
Optional accessories
For a list of optional accessories, see the online User’s Guide.
You can purchase screens or other accessories from an Epson authorized
reseller. To find the nearest reseller, call 800-GO-EPSON (800-463-7766). Or you
can purchase online at epsonstore.com (U.S. sales) or epson.ca (Canadian
sales).
4127945 Rev.0
1-B C
4127945 Rev.0
1-B M
4127945 Rev.0
1-B Y
4127945 Rev.0
1-B K