BK Radio LAA0725 User manual

LAA0725
Programming Cable
Installation Manual
RS-232 Serial Interface
BK Technologies
7100 Technology Drive
West Melbourne, FL 32904
Phone: [phone]
www.bktechnologies.com
TOP SIDE
BOTTOM SIDE
C3
C1
C4
C5
E1
E101
E104
E102
E103
U2
C2
C6
U1
E2 E3 E5
E4
E9 E8 E7 E6
BK RADIO LAA0725 P/N 7001-20044-400 07-18

The BK Radio LAA0725 Programming Cable provides a communication
link between a BK Radio radio and a computer.
Customized software for programming the various models of BK Radio
radios is available separately from BK Radio. Be sure to use the right
software for the radios you are programming. If the radios have been
modified with special features, mention that when ordering software.
BEFORE YOU BEGIN
Be certain that you have all the following:
LAA0725 Programming Cable
IBM or IBM compatible computer equipped with:
CD Rom Drive
RS-232 Serial Port
BK Radio software for the specific radio models to be
programmed
CABLE INSTALLATION
1. Connect the 9-pin connector to the serial port of the computer. Note
whether the serial port is Com 1 or Com 2.
2. Make sure that the battery pack is charged for portable radios. Make
sure the mobile radio is connected to a 12V DC power source.
3. Turn the computer “ON” and start the software for programming the
specific radio model.
4. FOR MOBILES: Insert the modular telephone style plug into the front
panel microphone connector.
FOR PORTABLES: Insert the non-modular style plug into the
universal side connector of the portable.
5. Turn the radio “ON”.
6. Follow the instructions provided with the programming software.
BK RADIO LAA0725 P/N 7001-20044-400 07-18