BK RESOURCES PTS-1848 User manual

1
1
2
2
AA
BB
ASSEMBLY INSTRUCTIONS
PASS THROUGH SHELVES - 18" W
PTS-1848
PTS-1860
PTS-1872
*Note: 60" long units have a qty of 12 Self-Tapping & Wall Screws
72" long units have a qty of 14 Self-Tapping & Wall Screws
PARTS INCLUDED
Item Item # Qty Description
A Shelf 1
B L-Bracket 2
CSelf-Tapping Screw *10 #10-16 x 1" Self-Tapping Screw
D Wall Screw *10 #10-12 x 2" Screw
A
B
Tools Required: Socket for Self-Tapping Screws: 5/16" or 8mm
Phillips drill bit for Wall Screws
Drill for installing Self-Tapping & Wall Screws
A
B
PTS-1848-2
PTS-1860-2
PTS-1872-2
1
1
2
2
AA
BB
ASSEMBLY INSTRUCTIONS
PASS THROUGH SHELVES - 18" W
PTS-1848
PTS-1860
PTS-1872
*Note: 60" long units have a qty of 12 Self-Tapping & Wall Screws
72" long units have a qty of 14 Self-Tapping & Wall Screws
PARTS INCLUDED
Item Item # Qty Description
A Shelf 1
B L-Bracket 2
CSelf-Tapping Screw *10 #10-16 x 1" Self-Tapping Screw
D Wall Screw *10 #10-12 x 2" Screw
A
B
Tools Required: Socket for Self-Tapping Screws: 5/16" or 8mm
Phillips drill bit for Wall Screws
Drill for installing Self-Tapping & Wall Screws
A
B
PTS-1848-2
PTS-1860-2
PTS-1872-2
1
1
2
2
AA
BB
1. Confirm all parts/hardware are included
2. A) Measure the width 'X' of the wall. B) Attach the L-Brackets to the support channels located on the underside of the Shelf at
distance 'X' using the Self-Tapping Screws provided. Note: The bolts located on the underside of the double Shelf must be
loosened before attaching the L-Brackets. This will require a 3/4" wrench or socket. Do NOT remove the bolts. Once
the L-Brackets have been attached, retighten bolts.
W
A
L
L
X
A)
X
X
Support Channels
Support Channels
Bolts, Qty of 4
B)
3. Place pass-thru shelf on the wall. Assistance will be needed. Attach pass-thru shelf to the wall using the Wall Screws provided.
W
A
L
L
W
A
L
L

1
1
2
2
AA
BB
ASSEMBLY INSTRUCTIONS
PASS THROUGH SHELVES - 24" W
PTS-2448
PTS-2460
PTS-2472
**Note: 72" long units have a qty of 12 Self-Tapping & Wall Screws
PARTS INCLUDED
Item Item # Qty Description
A Shelf 1
BAngle Bracket *4
CSelf-Tapping Screw **8 #10-16 x 1" Self-Tapping Screw
D Wall Screw **8 #10-12 x 2" Screw
Tools Required: Sockets for Self-Tapping Screws: 5/16" or 8mm
Phillips drill bit for Wall Screws
Drill for installing Self-Tapping & Wall Screws
A
B
*Note: 72" long units have a qty of 6 Angle Brackets
PTS-2448-2
PTS-2460-2
PTS-2472-2
A
B
1
1
2
2
AA
BB
ASSEMBLY INSTRUCTIONS
PASS THROUGH SHELVES - 24" W
PTS-2448
PTS-2460
PTS-2472
**Note: 72" long units have a qty of 12 Self-Tapping & Wall Screws
PARTS INCLUDED
Item Item # Qty Description
A Shelf 1
BAngle Bracket *4
CSelf-Tapping Screw **8 #10-16 x 1" Self-Tapping Screw
D Wall Screw **8 #10-12 x 2" Screw
Tools Required: Sockets for Self-Tapping Screws: 5/16" or 8mm
Phillips drill bit for Wall Screws
Drill for installing Self-Tapping & Wall Screws
A
B
*Note: 72" long units have a qty of 6 Angle Brackets
PTS-2448-2
PTS-2460-2
PTS-2472-2
A
B
1
1
2
2
AA
BB
1. Confirm all parts/hardware are included
2. A) Measure the width 'X' of the wall. B) Attach the Angle Brackets to the support channels located on the underside of the Shelf at
distance 'X' using the Self-Tapping Screws provided. It is recommended that the Angle Brackets be mounted towards the ends
of the Shelf.
W
A
L
L
X
A) B)
3. Place pass-thru shelf on the wall. Assistance will be needed. Attach pass-thru shelf to the wall using the Wall Screws provided.
W
A
L
L
W
A
L
L
X
X
Support Channels
Support Channels