Black & Decker X815 User manual

X815
X715
www.blackanddecker.co.uk

English
2
1. Spray button
2. Steam control dial
3. Steam burst button
4. Temperature control
dial
5. Heating light
6. Heel rest
7. Self-clean button
8. Cord storage
9. Maximum filling level
indicator
10. Water tank
11. Soleplate
12. Water tank cover
13. Spray nozzle

English
3
Intended use
Your Black & Decker iron has been designed to
remove creases from fabrics using heat & steam
and is not to be used for any other purpose.
This product is intended for consumer use only.
Read this entire manual carefully
before using the appliance.
Denotes the risk of electric shock.
Safety instructions
Warning! When using mains-powered
appliances, basic safety precautions, including
the following, should always be followed to
reduce the risk of fire, electric shock, personal
injury and material damage.
The intended use is described in this manual.
The use of any accessory or attachment or the
performance of any operation with this
appliance other than those recommended in
this instruction manual may present a risk of
personal injury.
Retain this manual for future reference.
Using your appliance
Make sure that the temperature control dial is
set to the min before connecting to or
disconnecting from the power supply.
Always route the cord carefully to avoid a
tripping hazard.
Never operate an appliance directly below the
socket-outlet it is connected to.
Always take care when using the appliance.
Do not use the appliance outdoors.
Do not operate the appliance if your hands are
wet. Do not operate the appliance if you are
barefoot.
Guide the power supply cord neatly so it does
not hang over the edge of a worktop and
cannot be caught accidentally or tripped over.
Never pull the power supply cord to disconnect
the plug from the socket. Keep the power
supply cord away from heat, oil and sharp
edges.
If the power supply cord is damaged during
use, disconnect the appliance from the power
supply immediately. Do not touch the power
supply cord before disconnecting from the
power supply.
Disconnect the appliance from the power
supply when not in use and before cleaning.
Safety of others
This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities, or lack
of experience and knowledge, unless they
have been given supervision or instruction
concerning use of the appliance by a person
responsible for their safety.
Children should be supervised to ensure that
they do not play with the appliance.
Do not allow children or any person unfamiliar
with these instructions to use the appliance.
Do not allow children or animals to come near
the work area or to touch the appliance or
power supply cord.
Close supervision is necessary when the
appliance is used near children.
After use
Switch off and remove the plug from the socket
before leaving the appliance unattended and
before changing, cleaning or inspecting any
parts of the appliance.

English
4
When not in use, the appliance should be
stored in a dry place. Children should not have
access to stored appliances.
Inspection and repairs
Before use, check the appliance for damaged
or defective parts. Check for breakage of parts,
damage to switches and any other conditions
that may affect its operation.
Do not use the appliance if any part is
damaged or defective.
Have any damaged or defective parts repaired
or replaced by an authorised repair agent.
Before use, check the power supply cord for
signs of damage, ageing and wear.
Do not use the appliance if the power supply
cord or mains plug is damaged or defective.
If the power supply cord or mains plug is
damaged or defective it must be repaired by
an authorised repair agent in order to avoid a
hazard. Do not cut the power supply cord and
do not attempt to repair it yourself.
Never attempt to remove or replace any parts
other than those specified in this manual.
Do not attempt to repair the appliance. Take it
to your nearest Black & Decker-owned or
authorised Service Centre for repair.
Electrical safety
This product must be earthed. Always
check that the power supply
corresponds to the voltage on the rating
plate.
Power plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (Class 1)
appliances. Unmodified plugs and matching
outlets will reduce the risk of electric shock.
Extension cables & Class 1
product
A 3-core cable must be used as your appliance
is earthed and of Class 1 construction.
Up to 30m (100ft) can be used without loss of
power.
To avoid the risk of electric shock, do
not immerse the cord, plug or appliance
in water or other liquid.
If the supply cord is damaged, it must be
replaced by the manufacturer or an authorized
Black & Decker Service Center in order to
avoid a hazard.
Additional safety instructions for
irons
Always route the cord carefully to avoid a
tripping hazard.
Do not use the appliance near water.
Do not place the appliance near heat sources
or directly under cabinets. Do not use the
appliance in the presence of explosive or
flammable materials.
The filling aperture must not be opened during
use.
Steam may escape from the soleplate.
Surfaces may be hot during use and during the
cool down period.
Set the temperature control dial to the min
position before plugging in or out.
Let the appliance cool down before leaving it
unattended and before cleaning or inspecting
any parts of the appliance.
The power supply cord should not touch the
hot soleplate during use or during the cool
down period.
Do not touch the soleplate until it has cooled
down.

English
5
Wait until the appliance has cooled down
before emptying the water tank as the water
may still be hot.
Do not immerse the appliance, cored set or
plug in liquids
Always disconnect the appliance from the
supply before filling, emptying, cleaning, or
carrying out any maintenance on the appliance.
This product is designed to remove creases
from fabrics using heat & steam and is not to
be used for any other purpose.
The iron must not be left unattended while it is
connected to the supply mains
The plug must be removed from the socket-
outlet before the water reservoir is filled with
water.
The iron must be used and rested on a stable
surface.
The iron is not to be used if it has been
dropped, if there are visible signs of damage or
if it is leaking.
Before first use
Cleaning the soleplate
In order to be able to use the steam function, you
will first need to fill the water tank (10) with water.
Make sure that the appliance is unplugged.
Fill the appliance with water as described
below.
Use the self-clean system as described below.
When finished, disconnect the appliance from
the mains supply and allow the unit to fully cool
then wipe the soleplate (11) and steam vents
with a cloth.
Some parts of the appliance have been lightly
greased and as a result the appliance may smoke
slightly when switched on for the first time. This
will cease after a short while.
Assembly
Warning! Before assembly, make sure that the
appliance is switched off and unplugged.
Filling the water tank
In order to be able to use the steam function, you
will first need to fill the water tank (10) with water.
Make sure that the appliance is unplugged.
Open the water tank cover (12).
Hold the appliance at an angle.
Fill the appliance with water using the beaker
provided.
Close the water tank cover (12).
Warning! Never fill above the maximum filling
level indicted on the appliance. Normal tap water
can be used, but if you live in a hard water area
the use of distilled water is recommended.
Do not use chemically de-scaled water.
Use
Warning! Do not leave the appliance unattended
while it is connected to the power supply and
during the cool down period.
Temperature setting
The required temperature setting depends on the
garment fabric.
Adjust the temperature control dial (4) to the
required setting:
-•Synthetics
-•• Silk/wool
-••• Cotton/Linen
If you are unsure of the fiber content of a
garment: start with a low temperature setting and
test on a small area (seam or inside hem). If
wrinkles remain, gradually increase the heat
setting until you find the optimum setting.

English
6
Using as a dry iron
Stand the appliance on its heel rest (6).
Plug the appliance in and switch on.
Set the steam control (2) to the no steam
position.
Adjust the temperature control dial (4) to the
required setting.
The heating light (5) will switch off when the
appliance has reached the required temperature.
Using as a steam iron
Fill the water tank as described above.
Stand the appliance on its heel rest (6).
Adjust the temperature control dial (4) to the
required steam setting.
The heating light (5) will switch on. When the
heating light switches off, the iron will be ready for
use as a steam iron.
The heating light will regularly switch on and off
whilst ironing.
To create steam, set the steam control (2) to
the steam position.
Plug the appliance in and switch on.
Using the steam burst button
The steam burst feature can only be used whilst
ironing on a high temperature setting.
Make sure that there is water in the tank and
the temperature control dial (4) is set to the
steam position.
Lift the appliance and press the steam burst
button (3). You may need to press a few times
to activate the pump.
Using the spray button
The spray feature can be used at any
temperature setting when either steam or dry
ironing.
Make sure that there is water in the water tank.
Press the spray button (1) several times to
activate the pump while you are ironing.
Using the self-clean button
The self-clean function must be used before
using the appliance for the first time and then
regularly to remove scale..
Fill the water tank (10) to the maximum filling
level (9).
Set the temperature control dial (4) to the min
position.
Plug the appliance in and switch on.
Set the temperature control dial (4) to the max
position.
Allow the appliance to heat up until the heating
light (5) switches off and then on again.
Unplug the appliance and hold it horizontally
over an empty sink.
Press and hold the self-clean button (7).
Hot water and steam will come out of the vents.
Impurities and scale will be washed away.
Warning! Keep all parts of your body away from
the soleplate (11) when performing self clean. Do
not direct the steam at another person
Move the iron backwards and forwards while
whilst the self clean button (7) is pressed.
After 10 seconds release the self-clean button
(7).
Stand the appliance upright on its heel rest (6),
Disconnect from the mains supply and leave to
cool thoroughly.
Re-fill the water tank with water.
Plug the appliance in and switch on.
When the iron has returned to max
temperature iron an old cloth or towel to dry the
soleplate.
Hints for optimum use
Sort the articles to be ironed according to the
fabric.
Start ironing with the fabrics requiring the
lowest heat setting.

English
7
The appliance can be used as a dry iron even if
there is water in the tank. Do not fill the tank
with water if the appliance is to be used as a
dry iron for an extended period.
Avoid ironing over zippers, rivets on jeans etc.
as they will scratch the soleplate.
Cleaning and maintenance &
storage
Before cleaning and maintenance, remove the
plug from the socket and allow the appliance to
cool.
Warning! Before cleaning and maintenance,
switch the appliance off, remove the plug from the
socket and allow the appliance to cool.
Warning! Do not immerse the appliance, the cord
set or the plug in water or any other liquid.
Pour out any remaining water after each use.
Only empty the appliance when it is completely
cold.
Wipe the exterior with a damp cloth.
Wipe scale and other residues off the soleplate
with a damp cloth.
Do not use scouring pads.
If necessary, use a mild detergent to remove
spots.
Do not use any abrasive or solvent based
cleaner.
Do not immerse the appliance in water or any
other liquid.
After use, when the appliance is cold the power
cord can be wrapped around the cord storage
(8) area at the base of the unit.
Store your appliance in a cool dry area.
Technical data
X715 X815
Voltage/Supply 220-240
Volts / 50Hz
220-240
Volts / 50Hz
Power consumption 1600 -
2000W
1800 -
2200W
Weight 1.25 kg 1.25 kg
Protecting the environment
Separate collection. This product must not
be disposed of with normal household
waste.
Should you find one day that your Black & Decker
product needs replacement, or if it is of no further
use to you, do not dispose of it with household
waste. Make this product available for separate
collection.
Black & Decker provides a facility for recycling
Black & Decker products once they have
reached the end of their working life. This
service is provided free of charge. To take
advantage of this service, please return your
product to any authorised repair agent who will
collect them on our behalf.
You can check the location of your nearest
authorised repair agent by contacting your local
Black & Decker office at the address indicated
in this manual. Alternatively, a list of authorized
Black & Decker repair agents and full details of
our after-sales service and contacts are
available on the Internet at: www.2helpU.com.

English
8
Guarantee
Black & Decker is confident of the quality of its
products and offers an outstanding guarantee.
This guarantee statement is in addition to and in
no way prejudices your statutory rights.
The guarantee is valid within the territories of the
Member States of the European Union and the
European Free Trade Area.
If a Black & Decker product becomes defective
due to faulty materials, workmanship or lack of
conformity, within 24 months from the date of
purchase, Black & Decker guarantees to replace
defective parts, repair products subjected to fair
wear and tear or replace such products to ensure
minimum inconvenience to the customer unless:
The product has been used for trade,
professional or hire purposes;
The product has been subjected to misuse
or neglect;
The product has sustained damage through
foreign objects, substances or accidents;
Repairs have been attempted by persons
other than authorised repair agents or Black
& Decker service staff.
To claim on the guarantee, you will need to
submit proof of purchase to the seller or an
authorised repair agent. You can check the
location of your nearest authorised repair agent
by contacting your local Black & Decker office at
the address indicated in this manual.
Alternatively, a list of authorised Black & Decker
repair agents and full details of our after-sales
service and contacts are available on the Internet
at: www.2helpU.com.

Italian
9
1. Pulsante vaporizzatore
2. Regolatore getto di
vapore
3. Pulsante getto di vapore
4. Manopola temperatura
5. Spia temperatura
6. Tallone di appoggio
7. Pulsante di autopulitura
8. Vano filo di
alimentazione
9. Indice massimo livello
di rifornimento
10. Serbatoio acqua
11. Soletta
12. Tappo serbatoio acqua
13. Vaporizzatore

Italian
10
Uso previsto
Il ferro da stiro Black & Decker è stato progettato
per eliminare le pieghe dai tessuti per mezzo del
calore e del vapore e non deve essere usato per
nessun altro scopo.
Questo prodotto è stato progettato solo per uso
individuale.
Leggere attentamente il presente
manuale nella sua totalità, prima di
usare l’elettrodomestico.
Indica il rischio di scosse elettriche.
Istruzioni di sicurezza
Attenzione! Quando si usano elettrodomestici
alimentati elettricamente, osservare sempre le
normali precauzioni di sicurezza per ridurre il
rischio di incendio, scosse elettriche, lesioni
personali e danni materiali.
L’uso previsto è descritto nel presente
manuale. Se questo elettrodomestico viene
usato con accessori o per usi diversi da quelli
raccomandati nel presente manuale d’uso, si
potrebbero verificare lesioni personali.
Conservare il presente manuale per futura
consultazione.
Utilizzo dell’elettrodomestico
Accertarsi che la manopola della temperatura
sia regolata sul minimo prima del collegamento
o dello scollegamento dall’alimentazione
elettrica.
Istradare sempre con attenzione il cavo di
alimentazione per evitare che causi
inciampamenti.
Non far mai funzionare l’elettrodomestico
direttamente al di sotto della presa di corrente
alla quale è collegato.
Prestare sempre attenzione quando si usa
l’elettrodomestico.
Non usare l’elettrodomestico all’aperto.
Non far funzionare l’elettrodomestico con le
mani umide. Non far funzionare
l’elettrodomestico quando si è a piedi nudi.
Sistemare il filo di alimentazione in modo ben
ordinato per evitare che sporga oltre il bordo
del piano di lavoro e che possa rimanere
accidentalmente impigliato o far inciampare.
Non tirare mai il filo di alimentazione per
scollegare la spina dalla presa di corrente.
Tenere il filo di alimentazione lontano da fonti
di calore, olio e bordi taglienti.
Se il filo di alimentazione subisce danni
durante l’uso, scollegare immediatamente
l’elettrodomestico dall’alimentazione elettrica.
Non toccare il filo di alimentazione prima di
scollegarlo dall’alimentazione elettrica.
Scollegare l’elettrodomestico dall’alimentazione
elettrica quando non è in uso e prima di pulirlo.
Sicurezza altrui
Questo elettrodomestico non è stato progettato
per impiego da parte di persone (o bambini)
portatrici di handicap fisici, psichici o sensoriali
o che non abbiano la dovuta esperienza o
conoscenza, a meno che non siano seguite
o opportunamente istruite sul suo impiego da
parte di una persona responsabile della loro
sicurezza.
Controllare che i bambini non giochino con
l’elettrodomestico.
Vietare l’uso dell’elettrodomestico a bambini
e ad adulti che non abbiano letto il presente
manuale.
Vietare a bambini o ad animali di avvicinarsi
all’area di lavoro o di toccare l’elettrodomestico
o il filo di alimentazione.
Prestare la massima attenzione quando si usa
l’elettrodomestico vicino ai bambini.