
14. DINNER PLATE
(1) Press “Dinner Plate“ repeatedly until the number you wish appears in the display, “9.0-”,
”12.0-”, ”18.0-” oz will display in order.
(2) For example, press “Dinner Plate” once, “9.0-” appears.
(3) Press "START/+30SEC." to cook, buzzer sounds once. When cooking finishes, buzzer
sounds five times and screen will display the correct time.
15. MEMORY FUNCTION
(1) Press "0/Memory" to choose memory 1-3 procedure. 1, 2, or 3 will display.
(2) If the procedure has been set, press "START/+30SEC " to use it. If not, continue to set
the procedure. Only one or two microwave stages can be set.
(3) After finishing the setting, press "0/Memory" to save the procedure and turn back to the
standby modes. Press "START/+30SEC." to save and operate the setting.
EXAMPLE: To set the following procedure as the second memory, that is memory 2, and
cook the food with 80% microwave power for 3 minutes and 20 seconds. Follow these steps:
A. In standby mode, press "0/Memory" twice, "2" displays.
B. Press " Time Cook ", then input number keys "3", "2", "0" to choose the cooking time.
C. Press "Power" once, then press number button "8", "PL8" displays.
D. Press "0/Memory" to save the current setting. Buzzer sounds once then turns back to
standby modes. If "START/+30SEC." is pressed, the cooking program can be saved
as memory 2 and operated.
E. If the electricity is not cut off, the procedure will be saved permanently. If it is, the
procedure will need to be reset.
F. To run the saved program, in standby mode, press "0/Memory" twice, "2" displays
and press "START/+30SEC." to run the saved cooking program.
Note: Auto cook and defrosting cannot be set in memory function.
16. MULTI-SECTION COOKING
At most, 2 stages can be set for cooking. In multi-stage cooking, if one stage is defrosting,
then defrosting shall be placed at the first stage automatically.
Note: Auto menu cannot work in the multi-stage cooking.
Example: if you want to cook with 80% microwave power for 5 minutes at 60% microwave
power for 10 minutes. The cooking steps are as follows:
(1) Press " Time Cook " once, then press "5", "0", "0" to set 5 minutes.
(2) Press "Power" once.
(3) Press number button "8" to set 80% microwave power.
(4) Press " Time Cook " once, then press "1", "0", "0", "0" to set 10 minutes.
(5) Press "Power " once.
(6) Then press press number button "6" to set 60% microwave power.
(7) Press "START/+30SEC." to start cooking.
Note: Auto cook cannot be set as one of the multi-section.