Black Orchid Hydro-Box Installation guide

70cm x 120cmx 70cm
Assembly Instruction Manual
for

Tent Fabric
Splash tray fabric
Frame Corner joints (inc 1 spare)
Box Contents
A
B
120cm
70cm
Pole
Pole
C70cm
Pole
D
E
120cm
70cm
Pole
Pole

1
STEP
Tent Assembly Instructions
Create the Base of the frame using 4 corner joints, 2 A poles and 2 B poles
Please follow the instructions carefully

2
STEP
Tent Assembly Instructions
Push the poles into the corner joints
until the locking ball pops back out
into the hole

3
STEP
Tent Assembly Instructions
Create the top as you did the base
Join the base together

4
STEP
Tent Assembly Instructions
Add poles C to the bottom

5
STEP
Tent Assembly Instructions
Join together the base of the frame with
the top of the frame.

6
STEP
Tent Assembly Instructions
Add poles D and E to the top of the frame

7
STEP
Tent Assembly Instructions
Unfold your tent and place the frame into the base

8
STEP
Tent Assembly Instructions
Make sure the bottom of tent is fitted
firmly around the frame before lifting
the top of the tent onto the frame

9
STEP
Tent Assembly Instructions
Lift the back of the
tent up and fit it around
the top of the frame.
Next zip the back up and
over the top to the front,
sealing the tent up.

10
STEP
Tent Assembly Instructions
Add the splash tray in the
bottom once complete