BLACKPOINT S30 User manual

S30 RECHARGEABLE SPEAKER
User’s Guide
Thank you for purchasing S30 Blackpoint’s
Rechargeable Speaker.
Please read the manual carefully before operating.
FEATURES
Wireless BT connection
TWS-True Wireless Stereo
Colorful Led lights
FM radio
USB/TF card
Led Display
Rechargeable battery
USB charging cable
Microphone input
Torch function
8W power output
SPECIFICATIONS
Subwoofer Unit: 3”x2
AUX in
Lithium battery: 1200mAH
INTERNATIONAL WARRANTY
Terms and Conditions
1. Blackpoint warrants the operation of this product to be free
from any manufacturing and/or material defect for a period of
6 months from the date of purchase by the user.
2. This warranty is limited to the repair and/or replacement
of this product, according to our own criterion, free of
charge within the stipulated term and it does not extend to
consequential or incidental damages to other products that
may be used with this unit.
3. The warranty shall be voided in the following cases: a)
repair or attempt to repair by third parties not authorized
by the company. b) in case of performing any type of cut in
connection cables, plugs, connectors, or other adapters
different from the original ones provided by the company.
4. To make this warranty effective, you shall contact the
Authorized Service Center of your country and they shall carry
out the pertinent procedure. In order to start the necessary
procedure to get said warranty, you shall hand in the Original
Purchase Invoice where the purchase date, dealer name and
product identication shall be stated clearly.
5. Transportation, freight, stay and/or insurance expenses, if
any, are not covered by this warranty.
REPAIR SERVICE
To ask for customer service please call 0810-888-7262.
1.WIRELESS BT CONNECTION
A) BT Version: 5.0, with lower power consumption and over
10m meters operating range.
B) ON/OFF, after the power is turned on, the display “BLUE”
ashes and the speaker emits a BT mode tone.
C) The “BLUE” character into the pairing state, open the
phone BT, search for the device name, click the device
name to conrm and then connect. After the connection
is successful, “BLUE” is always on, and the speaker sends
a pairing success tone. The “BLUE” character is displayed
during playback, and the “PAUS” character is displayed
when paused.
2. TF/MICRO SD CARD MODE:
A) When the speaker is not plugged into the TF card device,
it will boot into the BT mode. Inserting the TF card speaker
will automatically detect the TF card playback mode,
displaying ‘PLAY’ and playback time. If the speaker has a
TF card device, it will enter the TF card mode directly after
booting.
B) The display shows the playback time during playback,
and “PAUS” character are displayed when paused.
3.USB MODE:
A) When the speaker is not plugged into the USB disk, it
will boot into the BT mode. Inserting the U disk, speaker will
automatically detect the USB playback mode, displaying
‘PLAY’ and playback time. If the
speaker has a USB disk, it will enter the TF card mode
directly after booting.
B) The display shows the playback time during playback,
and “PAUSE” character are displayed when paused.
4.FM MODE:
A) Press the button ‘MODE’, enter into FM mode. FM
Frequency is 87.5Hz — 108.0MHz.
B) This speaker has a built-in radio antenna, needn’t an
external antenna.
C)Press and hold the button ‘PLAY/PAUSE’ to
automatically search the station, press the “PLAY/PAUSE’
button to pause.
5. AUX MODE:
A) Plug one end of the 3.5MM audio cable into the
speaker AUX jack, the speaker will automatically detect
the AUX mode, and the other 3.5MM plug is connected to
the phone or computer.
B) The “LINE” character is displayed in AUX mode. Press
the “PLAY/PAUSE” button to pause.
6.MIC FUNCTION:
In the power-on mode, plug in the wired microphone, begin
to work.
(Note: turn on the button of wired microphone before using.)
7.CHARGING:
A) Plug the USB cable into the speaker to connect to the
5V charger or computer to charge for inside Li-battery.
B) The item has a red light on the charging indicator. When
charging, the indicator light is on. When it is full, the indicator
light is off.
8.LOW-POWER PROTECTION:
When the speaker detects that the built-in battery voltage
is lower than 3.3V, it will emit a low-power alarm sound.
When the battery voltage is lower than 3.1V, the speaker will
automatically shut down.
9. MODE CYCLE:
Press ‘MODE’ button to switch BT, USB, TF, FM, AUx. (Note:
USB, TF, AUX are only displayed when USB, TF, AUX input
device is plugged in.)
10. LED FLASHLIGHT: Press and Hold ‘MODE’ button to
turn on/off the LED ashlight.
11.TORCH FUNCTION: Press a separate switch on the
handle to turn on/Off torch function.
12. TWS (TRUE WIRELESS STEREO)
Use your mobile phone connect one BT speaker successfully
rstly, Under BT mode, double click Play/Pause button of
another BT speaker to enter into TWS pairing.
USER MANUAL
www.blackpoint.life
S30

S30 RECHARGEABLE SPEAKER
User’s Guide
Thank you for purchasing S30 Blackpoint’s
Rechargeable Speaker.
Please read the manual carefully before operating.
FEATURES
Wireless BT connection
TWS-True Wireless Stereo
Colorful Led lights
FM radio
USB/TF card
Led Display
Rechargeable battery
USB charging cable
Microphone input
Torch function
8W power output
SPECIFICATIONS
Subwoofer Unit: 3”x2
AUX in
Lithium battery: 1200mAH
INTERNATIONAL WARRANTY
Terms and Conditions
1. Blackpoint warrants the operation of this product to be free
from any manufacturing and/or material defect for a period of
6 months from the date of purchase by the user.
2. This warranty is limited to the repair and/or replacement
of this product, according to our own criterion, free of
charge within the stipulated term and it does not extend to
consequential or incidental damages to other products that
may be used with this unit.
3. The warranty shall be voided in the following cases: a)
repair or attempt to repair by third parties not authorized
by the company. b) in case of performing any type of cut in
connection cables, plugs, connectors, or other adapters
different from the original ones provided by the company.
4. To make this warranty effective, you shall contact the
Authorized Service Center of your country and they shall carry
out the pertinent procedure. In order to start the necessary
procedure to get said warranty, you shall hand in the Original
Purchase Invoice where the purchase date, dealer name and
product identication shall be stated clearly.
5. Transportation, freight, stay and/or insurance expenses, if
any, are not covered by this warranty.
REPAIR SERVICE
To ask for customer service please call 0810-888-7262.
1.WIRELESS BT CONNECTION
A) BT Version: 5.0, with lower power consumption and over
10m meters operating range.
B) ON/OFF, after the power is turned on, the display “BLUE”
ashes and the speaker emits a BT mode tone.
C) The “BLUE” character into the pairing state, open the
phone BT, search for the device name, click the device
name to conrm and then connect. After the connection
is successful, “BLUE” is always on, and the speaker sends
a pairing success tone. The “BLUE” character is displayed
during playback, and the “PAUS” character is displayed
when paused.
2. TF/MICRO SD CARD MODE:
A) When the speaker is not plugged into the TF card device,
it will boot into the BT mode. Inserting the TF card speaker
will automatically detect the TF card playback mode,
displaying ‘PLAY’ and playback time. If the speaker has a
TF card device, it will enter the TF card mode directly after
booting.
B) The display shows the playback time during playback,
and “PAUS” character are displayed when paused.
3.USB MODE:
A) When the speaker is not plugged into the USB disk, it
will boot into the BT mode. Inserting the U disk, speaker will
automatically detect the USB playback mode, displaying
‘PLAY’ and playback time. If the
speaker has a USB disk, it will enter the TF card mode
directly after booting.
B) The display shows the playback time during playback,
and “PAUSE” character are displayed when paused.
4.FM MODE:
A) Press the button ‘MODE’, enter into FM mode. FM
Frequency is 87.5Hz — 108.0MHz.
B) This speaker has a built-in radio antenna, needn’t an
external antenna.
C)Press and hold the button ‘PLAY/PAUSE’ to
automatically search the station, press the “PLAY/PAUSE’
button to pause.
5. AUX MODE:
A) Plug one end of the 3.5MM audio cable into the
speaker AUX jack, the speaker will automatically detect
the AUX mode, and the other 3.5MM plug is connected to
the phone or computer.
B) The “LINE” character is displayed in AUX mode. Press
the “PLAY/PAUSE” button to pause.
6.MIC FUNCTION:
In the power-on mode, plug in the wired microphone, begin
to work.
(Note: turn on the button of wired microphone before using.)
7.CHARGING:
A) Plug the USB cable into the speaker to connect to the
5V charger or computer to charge for inside Li-battery.
B) The item has a red light on the charging indicator. When
charging, the indicator light is on. When it is full, the indicator
light is off.
8.LOW-POWER PROTECTION:
When the speaker detects that the built-in battery voltage
is lower than 3.3V, it will emit a low-power alarm sound.
When the battery voltage is lower than 3.1V, the speaker will
automatically shut down.
9. MODE CYCLE:
Press ‘MODE’ button to switch BT, USB, TF, FM, AUx. (Note:
USB, TF, AUX are only displayed when USB, TF, AUX input
device is plugged in.)
10. LED FLASHLIGHT: Press and Hold ‘MODE’ button to
turn on/off the LED ashlight.
11.TORCH FUNCTION: Press a separate switch on the
handle to turn on/Off torch function.
12. TWS (TRUE WIRELESS STEREO)
Use your mobile phone connect one BT speaker successfully
rstly, Under BT mode, double click Play/Pause button of
another BT speaker to enter into TWS pairing.
USER MANUAL
www.blackpoint.life
S30

S30 RECHARGEABLE SPEAKER
User’s Guide
Thank you for purchasing S30 Blackpoint’s
Rechargeable Speaker.
Please read the manual carefully before operating.
FEATURES
Wireless BT connection
TWS-True Wireless Stereo
Colorful Led lights
FM radio
USB/TF card
Led Display
Rechargeable battery
USB charging cable
Microphone input
Torch function
8W power output
SPECIFICATIONS
Subwoofer Unit: 3”x2
AUX in
Lithium battery: 1200mAH
INTERNATIONAL WARRANTY
Terms and Conditions
1. Blackpoint warrants the operation of this product to be free
from any manufacturing and/or material defect for a period of
6 months from the date of purchase by the user.
2. This warranty is limited to the repair and/or replacement
of this product, according to our own criterion, free of
charge within the stipulated term and it does not extend to
consequential or incidental damages to other products that
may be used with this unit.
3. The warranty shall be voided in the following cases: a)
repair or attempt to repair by third parties not authorized
by the company. b) in case of performing any type of cut in
connection cables, plugs, connectors, or other adapters
different from the original ones provided by the company.
4. To make this warranty effective, you shall contact the
Authorized Service Center of your country and they shall carry
out the pertinent procedure. In order to start the necessary
procedure to get said warranty, you shall hand in the Original
Purchase Invoice where the purchase date, dealer name and
product identication shall be stated clearly.
5. Transportation, freight, stay and/or insurance expenses, if
any, are not covered by this warranty.
REPAIR SERVICE
To ask for customer service please call 0810-888-7262.
1.WIRELESS BT CONNECTION
A) BT Version: 5.0, with lower power consumption and over
10m meters operating range.
B) ON/OFF, after the power is turned on, the display “BLUE”
ashes and the speaker emits a BT mode tone.
C) The “BLUE” character into the pairing state, open the
phone BT, search for the device name, click the device
name to conrm and then connect. After the connection
is successful, “BLUE” is always on, and the speaker sends
a pairing success tone. The “BLUE” character is displayed
during playback, and the “PAUS” character is displayed
when paused.
2. TF/MICRO SD CARD MODE:
A) When the speaker is not plugged into the TF card device,
it will boot into the BT mode. Inserting the TF card speaker
will automatically detect the TF card playback mode,
displaying ‘PLAY’ and playback time. If the speaker has a
TF card device, it will enter the TF card mode directly after
booting.
B) The display shows the playback time during playback,
and “PAUS” character are displayed when paused.
3.USB MODE:
A) When the speaker is not plugged into the USB disk, it
will boot into the BT mode. Inserting the U disk, speaker will
automatically detect the USB playback mode, displaying
‘PLAY’ and playback time. If the
speaker has a USB disk, it will enter the TF card mode
directly after booting.
B) The display shows the playback time during playback,
and “PAUSE” character are displayed when paused.
4.FM MODE:
A) Press the button ‘MODE’, enter into FM mode. FM
Frequency is 87.5Hz — 108.0MHz.
B) This speaker has a built-in radio antenna, needn’t an
external antenna.
C)Press and hold the button ‘PLAY/PAUSE’ to
automatically search the station, press the “PLAY/PAUSE’
button to pause.
5. AUX MODE:
A) Plug one end of the 3.5MM audio cable into the
speaker AUX jack, the speaker will automatically detect
the AUX mode, and the other 3.5MM plug is connected to
the phone or computer.
B) The “LINE” character is displayed in AUX mode. Press
the “PLAY/PAUSE” button to pause.
6.MIC FUNCTION:
In the power-on mode, plug in the wired microphone, begin
to work.
(Note: turn on the button of wired microphone before using.)
7.CHARGING:
A) Plug the USB cable into the speaker to connect to the
5V charger or computer to charge for inside Li-battery.
B) The item has a red light on the charging indicator. When
charging, the indicator light is on. When it is full, the indicator
light is off.
8.LOW-POWER PROTECTION:
When the speaker detects that the built-in battery voltage
is lower than 3.3V, it will emit a low-power alarm sound.
When the battery voltage is lower than 3.1V, the speaker will
automatically shut down.
9. MODE CYCLE:
Press ‘MODE’ button to switch BT, USB, TF, FM, AUx. (Note:
USB, TF, AUX are only displayed when USB, TF, AUX input
device is plugged in.)
10. LED FLASHLIGHT: Press and Hold ‘MODE’ button to
turn on/off the LED ashlight.
11.TORCH FUNCTION: Press a separate switch on the
handle to turn on/Off torch function.
12. TWS (TRUE WIRELESS STEREO)
Use your mobile phone connect one BT speaker successfully
rstly, Under BT mode, double click Play/Pause button of
another BT speaker to enter into TWS pairing.
USER MANUAL
www.blackpoint.life
S30

S30 RECHARGEABLE SPEAKER
User’s Guide
Thank you for purchasing S30 Blackpoint’s
Rechargeable Speaker.
Please read the manual carefully before operating.
FEATURES
Wireless BT connection
TWS-True Wireless Stereo
Colorful Led lights
FM radio
USB/TF card
Led Display
Rechargeable battery
USB charging cable
Microphone input
Torch function
8W power output
SPECIFICATIONS
Subwoofer Unit: 3”x2
AUX in
Lithium battery: 1200mAH
INTERNATIONAL WARRANTY
Terms and Conditions
1. Blackpoint warrants the operation of this product to be free
from any manufacturing and/or material defect for a period of
6 months from the date of purchase by the user.
2. This warranty is limited to the repair and/or replacement
of this product, according to our own criterion, free of
charge within the stipulated term and it does not extend to
consequential or incidental damages to other products that
may be used with this unit.
3. The warranty shall be voided in the following cases: a)
repair or attempt to repair by third parties not authorized
by the company. b) in case of performing any type of cut in
connection cables, plugs, connectors, or other adapters
different from the original ones provided by the company.
4. To make this warranty effective, you shall contact the
Authorized Service Center of your country and they shall carry
out the pertinent procedure. In order to start the necessary
procedure to get said warranty, you shall hand in the Original
Purchase Invoice where the purchase date, dealer name and
product identication shall be stated clearly.
5. Transportation, freight, stay and/or insurance expenses, if
any, are not covered by this warranty.
REPAIR SERVICE
To ask for customer service please call 0810-888-7262.
1.WIRELESS BT CONNECTION
A) BT Version: 5.0, with lower power consumption and over
10m meters operating range.
B) ON/OFF, after the power is turned on, the display “BLUE”
ashes and the speaker emits a BT mode tone.
C) The “BLUE” character into the pairing state, open the
phone BT, search for the device name, click the device
name to conrm and then connect. After the connection
is successful, “BLUE” is always on, and the speaker sends
a pairing success tone. The “BLUE” character is displayed
during playback, and the “PAUS” character is displayed
when paused.
2. TF/MICRO SD CARD MODE:
A) When the speaker is not plugged into the TF card device,
it will boot into the BT mode. Inserting the TF card speaker
will automatically detect the TF card playback mode,
displaying ‘PLAY’ and playback time. If the speaker has a
TF card device, it will enter the TF card mode directly after
booting.
B) The display shows the playback time during playback,
and “PAUS” character are displayed when paused.
3.USB MODE:
A) When the speaker is not plugged into the USB disk, it
will boot into the BT mode. Inserting the U disk, speaker will
automatically detect the USB playback mode, displaying
‘PLAY’ and playback time. If the
speaker has a USB disk, it will enter the TF card mode
directly after booting.
B) The display shows the playback time during playback,
and “PAUSE” character are displayed when paused.
4.FM MODE:
A) Press the button ‘MODE’, enter into FM mode. FM
Frequency is 87.5Hz — 108.0MHz.
B) This speaker has a built-in radio antenna, needn’t an
external antenna.
C)Press and hold the button ‘PLAY/PAUSE’ to
automatically search the station, press the “PLAY/PAUSE’
button to pause.
5. AUX MODE:
A) Plug one end of the 3.5MM audio cable into the
speaker AUX jack, the speaker will automatically detect
the AUX mode, and the other 3.5MM plug is connected to
the phone or computer.
B) The “LINE” character is displayed in AUX mode. Press
the “PLAY/PAUSE” button to pause.
6.MIC FUNCTION:
In the power-on mode, plug in the wired microphone, begin
to work.
(Note: turn on the button of wired microphone before using.)
7.CHARGING:
A) Plug the USB cable into the speaker to connect to the
5V charger or computer to charge for inside Li-battery.
B) The item has a red light on the charging indicator. When
charging, the indicator light is on. When it is full, the indicator
light is off.
8.LOW-POWER PROTECTION:
When the speaker detects that the built-in battery voltage
is lower than 3.3V, it will emit a low-power alarm sound.
When the battery voltage is lower than 3.1V, the speaker will
automatically shut down.
9. MODE CYCLE:
Press ‘MODE’ button to switch BT, USB, TF, FM, AUx. (Note:
USB, TF, AUX are only displayed when USB, TF, AUX input
device is plugged in.)
10. LED FLASHLIGHT: Press and Hold ‘MODE’ button to
turn on/off the LED ashlight.
11.TORCH FUNCTION: Press a separate switch on the
handle to turn on/Off torch function.
12. TWS (TRUE WIRELESS STEREO)
Use your mobile phone connect one BT speaker successfully
rstly, Under BT mode, double click Play/Pause button of
another BT speaker to enter into TWS pairing.
USER MANUAL
www.blackpoint.life
S30

S30 RECHARGEABLE SPEAKER
User’s Guide
Thank you for purchasing S30 Blackpoint’s
Rechargeable Speaker.
Please read the manual carefully before operating.
FEATURES
Wireless BT connection
TWS-True Wireless Stereo
Colorful Led lights
FM radio
USB/TF card
Led Display
Rechargeable battery
USB charging cable
Microphone input
Torch function
8W power output
SPECIFICATIONS
Subwoofer Unit: 3”x2
AUX in
Lithium battery: 1200mAH
INTERNATIONAL WARRANTY
Terms and Conditions
1. Blackpoint warrants the operation of this product to be free
from any manufacturing and/or material defect for a period of
6 months from the date of purchase by the user.
2. This warranty is limited to the repair and/or replacement
of this product, according to our own criterion, free of
charge within the stipulated term and it does not extend to
consequential or incidental damages to other products that
may be used with this unit.
3. The warranty shall be voided in the following cases: a)
repair or attempt to repair by third parties not authorized
by the company. b) in case of performing any type of cut in
connection cables, plugs, connectors, or other adapters
different from the original ones provided by the company.
4. To make this warranty effective, you shall contact the
Authorized Service Center of your country and they shall carry
out the pertinent procedure. In order to start the necessary
procedure to get said warranty, you shall hand in the Original
Purchase Invoice where the purchase date, dealer name and
product identication shall be stated clearly.
5. Transportation, freight, stay and/or insurance expenses, if
any, are not covered by this warranty.
REPAIR SERVICE
To ask for customer service please call 0810-888-7262.
1.WIRELESS BT CONNECTION
A) BT Version: 5.0, with lower power consumption and over
10m meters operating range.
B) ON/OFF, after the power is turned on, the display “BLUE”
ashes and the speaker emits a BT mode tone.
C) The “BLUE” character into the pairing state, open the
phone BT, search for the device name, click the device
name to conrm and then connect. After the connection
is successful, “BLUE” is always on, and the speaker sends
a pairing success tone. The “BLUE” character is displayed
during playback, and the “PAUS” character is displayed
when paused.
2. TF/MICRO SD CARD MODE:
A) When the speaker is not plugged into the TF card device,
it will boot into the BT mode. Inserting the TF card speaker
will automatically detect the TF card playback mode,
displaying ‘PLAY’ and playback time. If the speaker has a
TF card device, it will enter the TF card mode directly after
booting.
B) The display shows the playback time during playback,
and “PAUS” character are displayed when paused.
3.USB MODE:
A) When the speaker is not plugged into the USB disk, it
will boot into the BT mode. Inserting the U disk, speaker will
automatically detect the USB playback mode, displaying
‘PLAY’ and playback time. If the
speaker has a USB disk, it will enter the TF card mode
directly after booting.
B) The display shows the playback time during playback,
and “PAUSE” character are displayed when paused.
4.FM MODE:
A) Press the button ‘MODE’, enter into FM mode. FM
Frequency is 87.5Hz — 108.0MHz.
B) This speaker has a built-in radio antenna, needn’t an
external antenna.
C)Press and hold the button ‘PLAY/PAUSE’ to
automatically search the station, press the “PLAY/PAUSE’
button to pause.
5. AUX MODE:
A) Plug one end of the 3.5MM audio cable into the
speaker AUX jack, the speaker will automatically detect
the AUX mode, and the other 3.5MM plug is connected to
the phone or computer.
B) The “LINE” character is displayed in AUX mode. Press
the “PLAY/PAUSE” button to pause.
6.MIC FUNCTION:
In the power-on mode, plug in the wired microphone, begin
to work.
(Note: turn on the button of wired microphone before using.)
7.CHARGING:
A) Plug the USB cable into the speaker to connect to the
5V charger or computer to charge for inside Li-battery.
B) The item has a red light on the charging indicator. When
charging, the indicator light is on. When it is full, the indicator
light is off.
8.LOW-POWER PROTECTION:
When the speaker detects that the built-in battery voltage
is lower than 3.3V, it will emit a low-power alarm sound.
When the battery voltage is lower than 3.1V, the speaker will
automatically shut down.
9. MODE CYCLE:
Press ‘MODE’ button to switch BT, USB, TF, FM, AUx. (Note:
USB, TF, AUX are only displayed when USB, TF, AUX input
device is plugged in.)
10. LED FLASHLIGHT: Press and Hold ‘MODE’ button to
turn on/off the LED ashlight.
11.TORCH FUNCTION: Press a separate switch on the
handle to turn on/Off torch function.
12. TWS (TRUE WIRELESS STEREO)
Use your mobile phone connect one BT speaker successfully
rstly, Under BT mode, double click Play/Pause button of
another BT speaker to enter into TWS pairing.
USER MANUAL
www.blackpoint.life
S30

S30 RECHARGEABLE SPEAKER
User’s Guide
Thank you for purchasing S30 Blackpoint’s
Rechargeable Speaker.
Please read the manual carefully before operating.
FEATURES
Wireless BT connection
TWS-True Wireless Stereo
Colorful Led lights
FM radio
USB/TF card
Led Display
Rechargeable battery
USB charging cable
Microphone input
Torch function
8W power output
SPECIFICATIONS
Subwoofer Unit: 3”x2
AUX in
Lithium battery: 1200mAH
INTERNATIONAL WARRANTY
Terms and Conditions
1. Blackpoint warrants the operation of this product to be free
from any manufacturing and/or material defect for a period of
6 months from the date of purchase by the user.
2. This warranty is limited to the repair and/or replacement
of this product, according to our own criterion, free of
charge within the stipulated term and it does not extend to
consequential or incidental damages to other products that
may be used with this unit.
3. The warranty shall be voided in the following cases: a)
repair or attempt to repair by third parties not authorized
by the company. b) in case of performing any type of cut in
connection cables, plugs, connectors, or other adapters
different from the original ones provided by the company.
4. To make this warranty effective, you shall contact the
Authorized Service Center of your country and they shall carry
out the pertinent procedure. In order to start the necessary
procedure to get said warranty, you shall hand in the Original
Purchase Invoice where the purchase date, dealer name and
product identication shall be stated clearly.
5. Transportation, freight, stay and/or insurance expenses, if
any, are not covered by this warranty.
REPAIR SERVICE
To ask for customer service please call 0810-888-7262.
1.WIRELESS BT CONNECTION
A) BT Version: 5.0, with lower power consumption and over
10m meters operating range.
B) ON/OFF, after the power is turned on, the display “BLUE”
ashes and the speaker emits a BT mode tone.
C) The “BLUE” character into the pairing state, open the
phone BT, search for the device name, click the device
name to conrm and then connect. After the connection
is successful, “BLUE” is always on, and the speaker sends
a pairing success tone. The “BLUE” character is displayed
during playback, and the “PAUS” character is displayed
when paused.
2. TF/MICRO SD CARD MODE:
A) When the speaker is not plugged into the TF card device,
it will boot into the BT mode. Inserting the TF card speaker
will automatically detect the TF card playback mode,
displaying ‘PLAY’ and playback time. If the speaker has a
TF card device, it will enter the TF card mode directly after
booting.
B) The display shows the playback time during playback,
and “PAUS” character are displayed when paused.
3.USB MODE:
A) When the speaker is not plugged into the USB disk, it
will boot into the BT mode. Inserting the U disk, speaker will
automatically detect the USB playback mode, displaying
‘PLAY’ and playback time. If the
speaker has a USB disk, it will enter the TF card mode
directly after booting.
B) The display shows the playback time during playback,
and “PAUSE” character are displayed when paused.
4.FM MODE:
A) Press the button ‘MODE’, enter into FM mode. FM
Frequency is 87.5Hz — 108.0MHz.
B) This speaker has a built-in radio antenna, needn’t an
external antenna.
C)Press and hold the button ‘PLAY/PAUSE’ to
automatically search the station, press the “PLAY/PAUSE’
button to pause.
5. AUX MODE:
A) Plug one end of the 3.5MM audio cable into the
speaker AUX jack, the speaker will automatically detect
the AUX mode, and the other 3.5MM plug is connected to
the phone or computer.
B) The “LINE” character is displayed in AUX mode. Press
the “PLAY/PAUSE” button to pause.
6.MIC FUNCTION:
In the power-on mode, plug in the wired microphone, begin
to work.
(Note: turn on the button of wired microphone before using.)
7.CHARGING:
A) Plug the USB cable into the speaker to connect to the
5V charger or computer to charge for inside Li-battery.
B) The item has a red light on the charging indicator. When
charging, the indicator light is on. When it is full, the indicator
light is off.
8.LOW-POWER PROTECTION:
When the speaker detects that the built-in battery voltage
is lower than 3.3V, it will emit a low-power alarm sound.
When the battery voltage is lower than 3.1V, the speaker will
automatically shut down.
9. MODE CYCLE:
Press ‘MODE’ button to switch BT, USB, TF, FM, AUx. (Note:
USB, TF, AUX are only displayed when USB, TF, AUX input
device is plugged in.)
10. LED FLASHLIGHT: Press and Hold ‘MODE’ button to
turn on/off the LED ashlight.
11.TORCH FUNCTION: Press a separate switch on the
handle to turn on/Off torch function.
12. TWS (TRUE WIRELESS STEREO)
Use your mobile phone connect one BT speaker successfully
rstly, Under BT mode, double click Play/Pause button of
another BT speaker to enter into TWS pairing.
USER MANUAL
www.blackpoint.life
S30