KOMOTO HA User manual

User Manual
Model No. HA
KOMOTO ENTERPRISE CO., LTD.
No.3, Lane 53, Huey-Min St. Yuan-Lin Chang –Hua TAIWAN
URL: http://www.komoto.com E-mail:[e-mail] Page 1 of 8

Contents
1. Physical Description.
2. Specification.
3. Dimension.
4. How to Quick Start.
5. How to Install.
KOMOTO ENTERPRISE CO., LTD.
No.3, Lane 53, Huey-Min St. Yuan-Lin Chang –Hua TAIWAN
URL: http://www.komoto.com E-mail:[e-mail] Page 2 of 8

1. Physical Description
Building the Integrated Control Module:
3K~500Hz Pulsing range.
100us timing repetition rate for high frame rates.
Wide temperature detect range.
Pulse width to 2ms.
Building the Powerful and High efficiency
High Power LEDs and LDP can be up to 3780W
KOMOTO ENTERPRISE CO., LTD.
No.3, Lane 53, Huey-Min St. Yuan-Lin Chang –Hua TAIWAN
URL: http://www.komoto.com E-mail:[e-mail] Page 3 of 8

Compact & integrate Design
Safety Hole design to making install more safety
Support AC/ DC24V
KOMOTO ENTERPRISE CO., LTD.
No.3, Lane 53, Huey-Min St. Yuan-Lin Chang –Hua TAIWAN
URL: http://www.komoto.com E-mail:[e-mail] Page 4 of 8

2. Specification
Model HA
Illumination Source Latest High Power Technology LEDs
Wavelength White / Blue / NIR 850 nm (optional)
Light drive
Power(Pulsed)
3780w
Lane Coverage More than Dual Lane
Distance 300m /30m(ANPR model)
Trigger Modes
1. Strobe Mode (Strobe combine with continuous limit pulse)
2. Video / HD-SDI Mode (NTSC / PAL & Progressive )
3. Trigger Mode (Flashes upon input pulse)
Maximum trigger
frequency
10kHz
Maximum Pulse width 2ms
Trigger input DC3.3V to 24V opto-isolated
Control/Communication RS485
Been angle 10 to 40 degrees
Operating temperature -30℃to +60℃
Power requirement AC / DC 24
Enclosure IP66
KOMOTO ENTERPRISE CO., LTD.
No.3, Lane 53, Huey-Min St. Yuan-Lin Chang –Hua TAIWAN
URL: http://www.komoto.com E-mail:[e-mail] Page 5 of 8

3. Dimension
KOMOTO ENTERPRISE CO., LTD.
No.3, Lane 53, Huey-Min St. Yuan-Lin Chang –Hua TAIWAN
URL: http://www.komoto.com E-mail:[e-mail] Page 6 of 8

5. How to Quick Start
Description of connect line
Step 1: Take of the cover of power connecter.
Step 2 : Follow the description of connect line to connecting the suitable
camera and power.
KOMOTO ENTERPRISE CO., LTD.
No.3, Lane 53, Huey-Min St. Yuan-Lin Chang –Hua TAIWAN
URL: http://www.komoto.com E-mail:[e-mail] Page 7 of 8

5. How to Install
Step 1: Fix the Junction Box.
KOMOTO ENTERPRISE CO., LTD.
No.3, Lane 53, Huey-Min St. Yuan-Lin Chang –Hua TAIWAN
URL: http://www.komoto.com E-mail:[e-mail] Page 8 of 8