Blackspur Pro User BB-JS206 User manual
BB-JS206
12V TRICKLE CHARGER
INSTRUCTIONS
IMPORTANT Read these instructions fully before using the appliance.
Retain these instructions for future reference.
Pictures may vary slightly from actual product.
Warning:
Always attach the crocodile clips to the batteryprior to plugging into the mains powersupply.
This trickle chargerdoesnot have reverse polarity protection.Incorrectlyconnecting the batterywhilst the plug is
connectedtothe mains powersupply will cause irreversible damage to the charger and may damage the battery.
Note this trickle chargeris not intendedtocharge a flat batteryquickly. It could take anythingfrom60 to 100
hours dependingonamp hours of the battery. The plug unit may getwarm during the charging process, this is
normal.
Warning! Do notattemptto start the vehicle withthe chargerconnected, thismay damage the trickle charger
and/orthe battery. This unit is not fitted with any indication of batterycondition or charge. Itwill therefore not
indicate when the battery is fully charged or automatically switch off when it is.
Connecting the Charger tothe Battery:
Always connect the positive charging lead(RED) to the positive post of the battery (marked+ / +ve or P) first.
For batteriesstill installed in the vehicle: Note,do not use an extension leadand stand the chargerin the engine bay.
Connectthe negative charging lead (BLACK) to the vehicle chassis, wellaway fromthe battery, fuelline, hot or
movingparts. Once the clips are connectedto the battery plug the trickle chargerinto the powersupply.
For Batteries Removedfromthe Vehicle:
Always connect the positive charging lead(RED) to the positive post of the battery (marked+ / +ve or P) first.
Connectthe negative charging lead (BLACK) to the negative postof the battery(marked - / -ve or N).
Afterconnecting the clips, rotate themslightly so as to remove anydirt or oxidization,ensuring good contact.
Once the clips are connectedto the battery plug the trickle chargerinto the powersupply.
If the powersockethasa switch turn it on.
Disconnection
Switch offthe mains supplyand unplugthe charger.
Disconnectthe clips, Negative (BLACK lead) –ve first, followed bythe Positive (Redlead) +ve.
If the batteryhasbeen removed forcharging, replace it and re-connectthe cables.
Returns andWarranty
Should your appliance notwork or is damagedwhenyoufirst take it out of the carton, returnit to the retailer with
the packaging and proof of purchase.
Read these instructions carefully, failure to comply could damage the appliance and mayrenderany actual or
implied guarantee void. Keep this manual forfurtherreference.
Rated PowerInput:230V-240V
Rated Output:12V 500mA when connected to abattery (Offload approximately 20 Volts)
Class: II
Precautions andSafeguards
When usingelectrical appliances, basic precautionsneedtobe followedatalltimes to reduce the riskof fire,electrical
shock and injury.
•Ensure the powersource conformsto the electrical requirementsof the appliance.
•Use this electrical appliance as described in this manual,any otheruse is not recommended bythe manufacturer
and could have a detrimentaleffectonthe durability of the appliance and/orthe safetyof the user.
•This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental
capability has or lack of experience and knowledge, unless they have been given supervision or instruction
concerning use of the appliance by a person responsible fortheirsafety.
•Childrenshould be supervisedtoensure thatthey donot touch or play with the appliance.
•The warnings, precautions,inthis instruction manual, cannot cover all possible conditions and situations that
may occur. It mustbe understood bythe operatorthat commonsense and caution are factors,which cannotbe
built into this product but mustbe suppliedby the operator.
•The appliance must not be used in potentially dangerouslocations such as flammable, explosive, chemical-laden
or where petrolor flammable liquids are usedor stored.
•Neveroperate the appliance afterthe appliance malfunctions or the unit is damagedin anyway.
•Do not use any attachmentsoraccessories otherthan those supplied with the appliance.
•This product is not forcommercial use.
•Keepaway fromwaterand moist environments.
•This product is not a toy. Keepawayfrom children.
•Keepout of direct sunlight.
•Do not disassemble, adaptoralter the product. There are no serviceable internalparts.
•Clean witha dry cloth, do not use liquids or detergents.
•Remove jewellery when usingthis product.
•Nevertouchthe redand black clips together, this will cause a shortcircuit and may damage the appliance.
•This product is a trickle charger,not a float charger, do not keep it permanently connected.
Battery Safety
Lead-acid batteries can be verydangerous. Batteries can generate flammable gases during the normal charging
operation. Carefully read the warnings below.
•Read the warningson the battery and the vehicle for model-specificinstructions.
•This charger is intended to be used on lead-acid batteries, any other type of batteries may cause damage to the
charger or battery. If unsure of the batterytype contact the supplier of the batteryfor confirmation.
•Neverallowthe positive (+) andnegative (-) terminals on the batteryto connecttogether.
•Ensure adequate ventilation whenchargingto ensure thatgases can escape.
•Do not charge the batteryin freezingconditions.
•Wear eye protection andprotective gloves whenworkingwith lead-acid batteries.
•Ensure the batteryis in goodcondition and clean before charging. This can be checked usingthe battery
manufacturer’s instructions.
•If the batterywill nothold a charge have it checkedby a garage,the battery mayneed replacing.
•If the batteryswells,smokesorexpelsany substances, disconnectthe power to the chargerif safe todo so and
leave the area immediately.
•Ensure that the car is switched off, the key out of the ignition and the engine is cool.
•Most cars are ‘negative grounded’ which means thatthe chassis of the car is grounded tothe negative terminal
of the battery. Refer to your manufacturer’s instructions to check. These charging instructions are for a negative
groundedbattery.
If you have any questions, contact us via email at helpline@blackspur.com orourcustomerservice number
01473 833222 between the hoursof 8am and 4pm Mondayto Friday.
For your records and guarantee purposes, attach your sales receipt tothis manual
(Staple sales receipthere)
EU Declaration of Conformity
In accordance with EN ISO 17050-1:2010
Modelnumber:BB-JS206
Declaration number:2019206
Manufacturersreference number: JS206
Product:12V Trickle Charger
Description:This trickle charger is suitable formost 12V automotive lead-acidbatteries with a 500mA constant
output.It comesfitted with insulated crocodile clips & 1.6m cable wire (approx.).
Authorised representative /Importer:
Hamble Distribution Ltd,
15 Ashley Street,
Glasgow, G3 6DR.
This declaration of conformity is issuedunderthe sole responsibility of Hamble Distribution Ltd.
Hamble Distribution Ltd hereby declaresthatthe productidentified above meetsthe requirements ofthe following
EC Directives andharmonized standards. Therefore, qualifies forfree movementwithin markets comprising the
EuropeanUnion (EU) and the EuropeanEconomic Area (EEA): Technical documentation is kept byHamble
Distribution Ltd, 15 Ashley Street, Glasgow, G36DR
2014/35/EU LVD Directive conformsto:
EN 60335-1:2012+A11:2014+A12 :2017+A13 :2017
2014/30/EU EMC Directive conformsto:
EN 55014-1:2017, EN 61000-3-2:2014, EN 61000-3-3:2013 EN 55014-2 :2015
2011/65/EU RoHS Directive conformsto:
IEC 62321-8:2017 IEC 62321-7-2:2017
Year of CE marking 2019
Date: 18th February 2019
Signature:
Name:D. Robertson
Position:Joint Managing Director
Hamble Distribution Ltd, 15 Ashley Street, Glasgow, G36DR
Table of contents
