Blaupunkt CASABLANCA CD52 User manual

Radio / CD
Casablanca CD52
Heidelberg CD52
US version
Operating instructions
http://www.blaupunkt.com

2
Open here
Ouvrir s.v.p.
Por favor, abrir
Favor abrir

3
FRANÇAIS ENGLISH
ESPAÑOL
PORTUGUÊS
3
2
10
1
4
5
11
6
798
1213141516

4
1button - unlatches the flip/
release panel
2Volume control
3Button - switches the radio and
mute function on/off
4RDS button, to switch the RDS
function on/off (Radio Data Sys-
tem).
5FM button, to select the FM ra-
dio mode source and select the
FM memory banks
TS, to start the Travelstore func-
tion
6Display (display field)
7DIS, change display contents
button - indicates the time on
the display
8MENU button - selects the menu
for basic settings
9button - opens the flip/release
panel
CONTROLS
:Arrow-key block
;OK button - confirms menu en-
tries and starts the scan function
<DEQ button (digital equalizer) -
switches the equalizer on/off
=AUDIO button - adjusts bass,
treble, X-BASS, balance and
fader
>Key block 1- 6
?AM button, to select theAM ra-
dio mode source and select the
AM memory banks
@SRC button - selects between
CD, CD changer/Compact Drive
MP3 (if connected) andAUX
sources

5
FRANÇAIS ENGLISH
ESPAÑOL
PORTUGUÊS
TABLE OF CONTENTS
Notes and accessories ............ 6
Flip/release panel .................... 7
Switching on/off ...................... 8
Volume adjustment .................. 9
Radio mode ............................ 10
Setting the tuner ............................ 10
Switching to radio mode ................ 11
Switching the RDS function
on/off ............................................ 11
Selecting the waveband /
memory bank................................. 11
Tuning into a station ....................... 11
Setting the sensitivity of station
seek tuning.................................... 11
Storing stations ............................. 12
Storing stations automatically
(Travelstore) .................................. 12
Listening to stored stations ............ 12
Scanning receivable stations
(SCAN) ......................................... 12
Setting the scantime ...................... 12
Programme type (PTY) .................. 13
Optimising radio reception............. 13
Displaying scrolling text ................. 14
Setting the display ......................... 14
CD Mode ................................ 15
Starting CD mode ......................... 15
Selecting a track ........................... 15
Quick track selection ..................... 15
Fast search (audible) ..................... 15
Random play (MIX) ........................ 16
Scanning tracks (SCAN) ............... 16
Repeating a track (REPEAT) .......... 16
Interrupting play (PAUSE) .............. 16
Changing the display ..................... 16
Naming CDs ................................. 17
Displaying CD text ......................... 17
Removing a CD ............................. 18
CD changer mode .................. 18
Starting CD changer mode ............ 18
Selecting a CD.............................. 18
Selecting a track ........................... 18
Fast search (audible) ..................... 18
Changing the display ..................... 18
Repeating individual tracks or
whole CDs (REPEAT).................... 19
Random play (MIX) ........................ 19
Scanning all tracks on all CDs
(SCAN) ......................................... 19
Interrupting Play (PAUSE) ............. 19
Naming CDs ................................. 20
CLOCK - Time ........................ 21
Tone and volume balance ...... 22
Equalizer ................................ 23
Notes on adjusting the equalizer .... 23
Switching the equalizer on/off ........ 24
Setting the equalizer ...................... 24
Selecting sound presets ................ 24
Selecting car presets..................... 24
Setting the level indicator............... 25
Setting aid for the equalizer ........... 25
External audio sources .......... 26
Technical data ........................ 26
Installation instructions ........ 101

6
Notes and accessories
Thank you for deciding to use a Blau-
punkt product. We hope you enjoy us-
ing this new piece of equipment.
Please read these operating instruc-
tionsbefore usingthe equipmentfor
the first time.
The Blaupunkt editors are constantly
working on making the operating in-
structions clearer and easier to under-
stand. However, if you still have any
questions on how to operate the equip-
ment, please contact your dealer or the
telephone hotline for your country. You
will find the telephone numbers printed
at the back of this booklet.
We provide a manufacturer guarantee
for our products bought within the Eu-
ropean Union. You can view the guar-
antee conditions at www.blaupunkt.de
or ask for them directly at:
Blaupunkt GmbH
Hotline
Robert Bosch Str. 200
D-31139 Hildesheim
NOTES AND ACCESSORIES
Road safety
Roadsafetyhaspriority.Onlyop-
erate your car radio if road and traf-
ficconditionsallow.Familiariseyour-
selfwiththeunitbeforesettingoffon
your journey.
You should always be able to hear
police, fire and ambulance sirens in
good time. For this reason, set the
volume of your car radio at a suita-
ble level.
Installation
If you would like to install your car radio
yourself,pleasereadtheinstallationand
connectioninstructionsattheendofthe
manual.
Accessories
Please use only Blaupunkt-approved
accessories.
Remote controls
Themostimportantfunctionsofyourcar
radio can be selected safely and con-
veniently from the steering wheel using
the remote controls RC 08, RC 10 or
RC 10H (available as an optional ex-
tra).
Theradiocannotbeswitched on/offvia
remote control.
Amplifiers
All Blaupunkt amplifiers are suitable for
use with the radio.

7
FRANÇAIS ENGLISH
ESPAÑOL
PORTUGUÊS
CD changer
The following Blaupunkt CD changers
can be connected to the radio:
CDC A 02, CDCA 08 and IDCA 09.
Compact Drive MP3
As an alternative to a CD changer, you
can connect a Compact Drive MP3 to
access MP3 music tracks. If you con-
nectaCompactDriveMP3,youwillfirst
needtouseacomputertostoretheMP3
music tracks on the Microdrive™hard
disk inside the Compact Drive MP3.
Then, when the Compact Drive MP3 is
connectedtothecarradio,youcanplay
the tracks like normal CD music tracks.
The Compact Drive MP3 is operated in
the same way as a CD changer. Most
of the CD changer functions can also
be used with the Compact Drive MP3.
Amplifier / sub-out
(only Casablanca CD52)
The car radio provides connections for
connecting external amplifiers and a
subwoofer.
We recommend you use well-matched
productsfromtheBlaupunktor Velocity
product ranges.
NOTES AND ACCESSORIES FLIP/RELEASE PANEL
Flip/release panel
Theft protection
Yourcarradioisfittedwithaflip/release
paneltoguardagainsttheft.Withoutthis
panel, the unit is worthless to the thief.
Protectyourunitfromtheftbytakingthe
flip/release panel with you every time
youleavethecar.Donotleavethepanel
behindinthecar,evenifitisoutofsight.
The constructive design of the panel
makes for simple handling.
Note:
●Do not drop the flip/release panel.
●Do not expose the flip/release pan-
el to direct sunshine or other sourc-
es of heat.
●Keep the flip/release panel in the
case provided.
●Avoid direct skin contact with the
flip/release panel. Please clean it
when necessary with some white
spirit on a lint-free cloth.
Removing the flip/release panel
1

8
➮Press the button 1.
This unlatches the flip/release panel.
➮First pull the flip/release panel
straight and then to the left out of
the unit.
●After removing the flip/release pan-
el, the unit switches itself off.
●All the current settings are saved.
●If there is a CD in the unit, it re-
mains there.
Attaching the flip/release panel
➮Slide the flip/release panel from left
to right into the unit guide.
➮Press the left side of the panel into
the unit until it slots into place.
Note:
●Do not press against the display
while attaching the flip/release pan-
el.
If the device was still switched on when
you removed the control panel, it will
automatically switch on again with the
lastsettingsactivated(i.e.radio,CD,CD
changer/Compact Drive MP3 or AUX)
when the panel is replaced.
Switching on/off
Therearevariouswaysofswitchingthe
car radio on and off, as described be-
low.
Switching on/off using the ignition
Ifthecarradioiscorrectlyconnectedto
the ignition and has not been switched
off using the button 3, it is switched
on/off simultaneously with the ignition.
You can also switch on your car radio
when the vehicle ignition is off.
➮To do so, press the button 3.
Note:
To protect the vehicle battery, the unit
switches off automatically after one
hour.
Switching on/off using the flip/
release panel
➮Remove the flip/release panel.
The unit switches itself off.
➮Replace the flip/release panel once
more.
The car radio is switched on. The last
settings (radio, CD, CD changer/Com-
pact Drive MP3 orAUX) are activated.
Switching on/off using the button
3
➮To switch the unit on, press the but-
ton 3.
➮To switch the unit off, hold the but-
ton 3down for more than two
seconds.
The car radio is now switched off.
FLIP/RELEASE PANEL SWITCHING ON/OFF

9
FRANÇAIS ENGLISH
ESPAÑOL
PORTUGUÊS
Mute setting
This feature enables you to lower the
systemvolumeinstantaneously(mute).
➮Briefly press button 3.
“MUTE”appears on the display.
Telephone Audio/Navigation
Audio
If your car radio is connected to a mo-
bile telephone or a navigation system,
the volume will be muted as soon as
you “pick up”the telephone or the radio
relays voice output from the navigation
system and the conversation or voice
outputisheardthroughtheradio'sloud-
speakers. In order for this to work, the
mobile telephone or navigation system
has to be connected to the car radio as
described in the instructions. For this,
you need adapter cable Blaupunkt no.
7 607 001 503.
To findoutwhichnavigationsystemsare
compatible with your car radio, please
consult your Blaupunkt dealer.
Thevolumeatwhichtelephoneconver-
sations and voice output from the navi-
gation system are switched on is ad-
justable.
➮Press the MENU button 8.
➮Press the button :repeatedly
until “TEL/NAVI VOL”appears on
the display.
➮Use the buttons :to set the
desired volume.
➮When you have completed the set-
tings, press either the MENU but-
ton 8or OK ;.
Volume adjustment
The system volume can be adjusted in
steps from 0 (off) to 66 (maximum).
➮To raise the system volume, turn
the volume control 2to the right.
➮To lower the system volume, turn
the volume control 2to the left.
Setting the switch-on volume
You can set the volume at which you
wishthecarradiotoplaywhenswitched
on.
➮Press the MENU button 8.
➮Press the or button :repeat-
edly until “ON VOLUME”appears
on the display.
➮Use the buttons :to set the
switch-on volume.
If you select “LAST VOL”, the volume
playedbeforetheunitwaslastswitched
off will be reactivated.
Note:
●To protect your hearing, the maxi-
mum switch-on volume under the
“LAST VOL”setting is “38”. If the
volume was higher before the unit
was switched off and “LAST VOL”
has been selected, the volume will
be set at “38”the next time the ra-
dio is switched on.
When you have completed setting the
volume,
➮press the MENU button 8.
VOLUME ADJUSTMENT

10
Note:
Youcanadjustthevolumefortelephone
conversations and voice output while
they are being heard by using the vol-
ume control 2.
Automatic Sound
(only Casablanca CD52)
Thisfunctionadjuststhevolumeofyour
car radio automatically to your driving
speed. This requires your device to be
connected as described in the installa-
tion guide.
The automatic volume booster can be
set in six stages (0-5).
➮Press the MENU button 8.
➮Press the button :until “AUTO
SOUND”appears in the display.
➮Set the volume adjustment with the
buttons :.
➮When the setting process is com-
plete, press the MENU button 8
or OK ;.
Note:
The right speed-adjusted volume set-
tingdependsonnoiselevelsinsideyour
car. Try various values (0-5) until you
find the best setting.
Radio mode
ThisunitisequippedwithanRDSradio
receiver.ManyofthereceivableFMsta-
tions transmit a signal that not only car-
ries the programme but also additional
information such as the station name
and programme type (PTY).
The station name appears in the dis-
play as soon as the radio is able to re-
ceive it and the RDS function is activat-
ed. You can optionally display the pro-
grammetype.Forfurtherdetails,please
read the section entitled “Programme
type (PTY)”.
Setting the tuner
To ensure that the tuner works proper-
ly, the device must be configured for
your region. You can choose between
Europe (EUROPE) and the USA (N
AMERICA). By default, the tuner is set
to the region in which the device was
sold. If you experience problems with
radio reception, please check this set-
ting.
Theseoperatinginstructionsrefertothe
“NAMERICA”setting.
➮Press the MENU button 8.
➮Keep pressing the button :
until “TUNER AREA”appears in
the display.
➮Press the or button :for
longer than two seconds to switch
between “EUROPE”and “N
AMERICA”.
➮Press the MENU button 8or OK
;.
VOLUME ADJUSTMENT RADIO MODE

11
FRANÇAIS ENGLISH
ESPAÑOL
PORTUGUÊS
Switching to radio mode
If you are in CD, CD changer/Compact
Drive MP3 orAUX mode,
➮press the FM TS button 5for FM
radio mode.
or
➮press the AM button ?forAM ra-
dio mode.
Switching the RDS function on/
off
➮To use the RDS functions, press
the RDS button 4.
The RDS function is active when RDS
lights up in the display with a symbol.
Selecting the waveband /
memory bank
This unit can receive programmes
broadcast over the FM and AM wave-
bands. There are three memory banks
(FM1, FM2 and FMT) for the FM wave-
band and two memory banks (AM and
AMT) for theAM waveband.
Sixstationscanbestoredineachmem-
ory bank.
To switch between the FM memory
banks,
➮briefly press the FM TS button 5
repeatedly until the required mem-
ory bank appears in the display.
To switch between the AM memory
banks,
➮briefly press the AM button ?re-
peatedly until the required memory
bank appears in the display.
Tuning into a station
There are various ways of tuning into a
station.
Automatic seek tuning
➮Press the or button :.
The unit tunes into the next receivable
station.
Tuning into stations manually
Youcanalso tuneintostationsmanual-
ly.
➮Press the or button :.
Note:
Youcanonly tuneintostationsmanual-
ly on the FM waveband if the RDS and
PTY functions are deactivated.
Setting the sensitivity of station
seek tuning
You can choose whether to only tune
into stations with a strong reception or
to also tune into those with a weak re-
ception.
➮Press the MENU button 8.
➮Keep pressing the button :un-
til “SENS”appears in the display.
➮Press the button :.
Thedisplayshowsthecurrentlysetsen-
sitivity level. “SENS 6”means that the
tuner is set to the highest sensitivity
setting. “SENS 1”is the lowest setting.
➮Set the required sensitivity using
the or button :.
RADIO MODE

12
When you have finished making your
changes,
➮press the MENU button 8or OK
;.
Storing stations
Storing stations manually
➮Select the required memory bank
(FM1, FM2 or FMT) or theAM
waveband.
➮Tune into the required station.
➮Press one of the station buttons 1 -
6>for longer than two seconds
to store the station to that button.
Storing stations automatically
(Travelstore)
You can automatically store the six sta-
tions with the strongest reception in the
region. The stations are stored in the
FMT memory bank in FM radio mode
orintheAMTmemorybank inAM radio
mode.
Note:
Anystationsthatwerepreviouslystored
in these memory banks are deleted in
the process.
➮Keep the FM TS button 5
pressed for longer than two sec-
onds.
The station storing procedure begins.
“TRAVEL-STORE”appears in the dis-
play.Aftertheprocessiscompleted,the
station stored in location 1 of the FMT
orAMT memory bank will be played.
Listening to stored stations
➮Select the memory bank or wave-
band.
➮Press the station button 1 - 6 >
that corresponds to the station you
want to listen to.
Scanning receivable stations
(SCAN)
You can briefly play (scan) all the re-
ceivablestations.Youcansetthescan-
ning time (scantime) to between 5 and
30 seconds in the menu.
Starting SCAN
➮Keep the OK button ;pressed for
longer than two seconds.
Scanning begins. “SCAN”appears
brieflyinthedisplayfollowedbyaflash-
ing display of the current station name
or frequency.
Stopping SCAN and continuing
listening to a station
➮Press the OK button ;.
Scanningisstoppedandthestationthat
was tuned into last will remain active.
Setting the scantime
➮Press the MENU button 8.
➮Keep pressing the button :un-
til “SCANTIME”appears in the dis-
play.
➮Set the required scantime using
the or buttons :.
➮When you have finished making
your changes, press the MENU
button 8or OK ;.
RADIO MODE

13
FRANÇAIS ENGLISH
ESPAÑOL
PORTUGUÊS
Note:
The set scantime also applies to scan-
ning in CD mode but not to scanning in
CD changer mode.
Programme type (PTY)
Besides transmitting the station name,
someFMstationsalsoprovideinforma-
tiononthetype of programmethatthey
arebroadcasting.Yourradiocanreceive
and display this information.
Forexample,theprogrammetypescan
be:
ROCK CLS_ROCK TOP_40
ADLT_HIT COUNTRY OLDIES
SOFT_RCK SPORTS TALK
Using the PTY function, you can direct-
ly select stations of a particular pro-
gramme type.
Switching PTY on/off
➮Press the MENU button 8.
➮Keep pressing the or button
:until “PTY ON”or “PTY OFF”
appears in the display.
➮Press the or button :to
switch PTY ON or OFF.
When PTY is switched on, PTY lights
up in the display.
➮Press the MENU button 8or OK
;.
Selecting a programme type and
starting seek tuning
➮Press the or button :.
The current programme type appears
in the display.
➮If you want to select another pro-
gramme type, you can do so by
pressing the or button :
whilst this display is visible.
Or
➮Press one of the buttons 1 - 6 >
to select a programme type that is
stored on one of these buttons.
The selected programme type is dis-
played briefly.
➮Press the or button :to start
seek tuning.
The next station corresponding to your
selected programme type will then be
tuned into.
Storing a programme type on a
station button
➮Select a programme type using the
or button :.
➮Keep the required station button
1 - 6 >pressed for longer than
two seconds.
The programme type is now stored on
the selected button 1 - 6 >.
Optimising radio reception
Treble reduction feature during
interference (HICUT)
TheHICUTfunctionimprovesreception
during poor radio reception (only FM).
If interference occurs, the treble is au-
tomatically reduced thus reducing the
interference level.
Switching HICUT on/off
➮Press the MENU button 8.
RADIO MODE

14
➮Keep pressing the button :un-
til “HICUT”appears in the display.
➮Press the or button :to ad-
just HICUT.
“HICUT 0”means that no reduction will
bemade,“HICUT3”meansamaximum
automatic reduction of the treble and
interference level will be applied.
➮Press the MENU button 8or OK
;.
Switching bandwidth during
interference (SHARX)
The SHARX function allows you to
largely avoid interference caused by
neighbouring radio stations (FM only).
Switch on the SHARX function if you
experience a high radio station density.
Switching SHARX on/off
➮Press the MENU button 8.
➮Keep pressing the button :
until “SHARX”appears in the dis-
play.
➮Press the or button :to
switch SHARX on/off.
“SHARX OFF”means automatic band-
widthswitchingisdeactivated,“SHARX
ON”means it is activated.
➮Press the MENU button 8or OK
;.
Displaying scrolling text
Some radio stations use the RDS sig-
nal to transmit advertising or other in-
formation instead of their station name.
These scrolling texts appear in the dis-
play.
You can deactivate the “scrolling text”
displayforstationsthatyouhavestored
on the station buttons.
➮Keep the RDS button 4pressed
until “NAME FIX”appears in the
display.
➮To allow scrolling texts to appear in
the display again, keep the RDS
button 4pressed until “NAME
VAR”appears in the display.
Note:
If you tune into an already stored sta-
tion using a different means (e.g. using
SCAN or by searching), the “scrolling
texts”will be displayed.
Setting the display
When in radio mode, you have the op-
tion of continuously displaying the time
or continuously displaying the station
name or frequency.
➮Keep the DIS button 7
pressed until the required display
appears.
RADIO MODE

15
FRANÇAIS ENGLISH
ESPAÑOL
PORTUGUÊS
CD Mode
You can use this unit to play standard
CDs with a diameter of 12 cm.
CD-Rs and CD-RWs (CDs that you
have “burned”yourself) can generally
alsobeplayed.Duetothevaryingqual-
ity of CDs, Blaupunkt cannot guaran-
tee that this will work properly.
To ensurethe system functions proper-
ly, only use CDs labelled with the com-
pact disc logo. Problems might be ex-
periencedwhentryingtoplaycopy-pro-
tected CDs. Blaupunkt cannot guaran-
tee the proper functioning of copy-pro-
tected CDs!
Risk of damage to CD drive!
Single CDs with a diameter of 8 cm
and CDs which are not circular
(“shape CDs”) should not be used.
We accept no liability for any dam-
age to the CD drive that may occur
as a result of the use of unsuitable
CDs.
Starting CD mode
●If there is no CD in the drive,
➮Press the button 9.
The flip/release panel opens.
➮Gently insert the CD into the CD
compartment with the printed side
uppermost until you feel some re-
sistance.
The CD will be drawn into the drive.
Do not hinder or assist the drive as it
draws the CD in.
➮Close the panel using light pres-
sure until you feel it latch into place.
CD playback begins.
●If there is already a CD in the drive,
➮press the SRC button @repeated-
ly until “CD”appears on the dis-
play.
Playbackbeginsfromthepointatwhich
it was last interrupted.
Selecting a track
➮Press one of the buttons on the ar-
row block :to select the next or
previous track.
Ifthe or button:ispressedonce,
the current track is played again from
the beginning.
Quick track selection
To quickly select tracks backwards or
forwards,
➮keep one of the buttons :
pressed until fast reverse / forward
track selection begins.
Fast search (audible)
Forafastsearchbackwardsorforwards
➮keep the buttons :pressed
until the fast search backwards or
forwardsbegins.
CD MODE

16
Random play (MIX)
➮Press the button 5MIX >.
“MIXCD”appearsbrieflyonthedisplay,
theMIXsymbollightsup.Thenexttrack
played will be randomly selected.
Stopping MIX
➮Press the button 5MIX >once
again.
“MIX OFF”appears briefly on the dis-
play, the MIX symbol goes out.
Scanning tracks (SCAN)
You can briefly listen in to all the tracks
on a CD.
➮Hold down the OK button ;for
more than two seconds. The next
track starts to play.
Note:
The scanning time is adjustable. Read
about setting the scanning time in the
section “Setting the scanning time”in
the chapter “Radio mode”.
Stopping SCAN and continuing
playback
➮Press the OK button ;to end
scanning.
The current track will then continue to
play.
Repeating a track (REPEAT)
➮If you would like to repeat a track,
press button 4RPT >.
“REPEATTRCK”appearsbrieflyonthe
display, the RPT symbol lights up. The
track is then repeated until RPT is de-
activated.
Stopping REPEAT
➮If you would like to end repeat,
press the button 4RPT >once
again.
“REPEAT OFF”appears briefly on the
display, the RPT symbol goes out. Nor-
mal playback is resumed.
Interrupting play (PAUSE)
➮Press the button 1>.
“PAUSE”appears on the display.
Ending Pause
➮Press the button 1>during the
pause.
Play then resumes.
Changing the display
➮To alter the display between track
number and time or track number
and playing time or track number
and CD name, press the DIS 7
button once or several times for
more than two seconds until the
desired elements appear on the
display.
CD MODE

17
FRANÇAIS ENGLISH
ESPAÑOL
PORTUGUÊS
Naming CDs
To make it easier for you to recognise
your CDs, the car radio offers an indi-
vidual name option for 30 CDs. The
namesshouldhaveamaximumofeight
digits. If you attempt to allocate more
than 30 names, “FULL”will appear on
the display.
Entering/altering CD names
➮Listen to the desired CD.
➮Press the MENU button 8.
➮Use the buttons :to select
“CD NAME”.
➮Press the or button :twice.
You are now in the edit mode. If the CD
youhaveselectedisstillunnamed,eight
underlines appear on the display.
The current input position flashes.
➮Use the buttons :to select
your characters. If a position is left
blank, you have selected the un-
derline.
➮Use the or button :to pro-
ceed to your next input position.
➮Press the MENU button 8or OK
;to save the name entered.
Clearing a CD name
➮Listen to the CD whose name you
wish to clear.
➮Press the MENU button 8.
➮Use the buttons :to select
“CD NAME”.
➮Press the or button :.
➮Hold down the MENU button 8.A
beep sounds at the end of four
seconds and “DELETE NAME”ap-
pears on the display.
➮Release the MENU button 8.
The CD name is now deleted.
➮Press the OK button ;to return to
the menu.
Displaying CD text
Some CDs feature so-called CD text.
The CD text may include the name of
the performer, the album and the track
name.
You can have the CD text displayed as
running text at every change of track.
After the CD text has been displayed
once, the standard display is used.
Please see the section “Changing the
display”.IftheCDintheplayercontains
no CD text, “NO TEXT”will appear on
thedisplaywhentheCD textfunctionis
activated.
Switching CD text on/off
➮Press the MENU button 8.
➮Press the button :repeatedly
until “CD TEXT”appears on the
display.
➮Switch on the CD text function by
pressing the buttons :
(“CD TEXT ON”) or off (“CD TEXT
OFF”).
➮When you have completed the set-
ting procedure, press the MENU
button 8or OK ;.
CD MODE

18
Removing a CD
➮Press the button 9.
Theflip/releasepanelopenstothefront
and the CD is ejected.
➮Carefully remove the CD and close
the flip/release panel.
CD changer mode
Note:
Information on handling CDs, inserting
CDsandoperatingtheCDchangercan
be found in the operating instructions
accompanying your CD changer.
Starting CD changer mode
➮Press the SRC button @repeat-
edly until “CHANGER”appears on
the display.
Playback begins with the first CD the
CD changer recognises.
Selecting a CD
➮To change up or down to a different
CD, press the or button :
once or several times.
Selecting a track
➮To move up/down from one track to
another on the current CD,
press the or
button :once or
severaltimes.
Fast search (audible)
Forafastsearchbackwardsorforwards
➮keep the buttons :pressed
until the fast search backwards or
forwardsbegins.
Changing the display
➮To alter the display between track
number and playing time or track
number and time or track number
and CD number or track number
and CD name, press the DIS 7
button once or several times for
CD MODE CD CHANGER MODE

19
FRANÇAIS ENGLISH
ESPAÑOL
PORTUGUÊS
more than two seconds until the
desired elements appear on the
display.
Repeating individual tracks or
whole CDs (REPEAT)
➮To repeat the current track, press
the button 4 RPT >briefly.
“REPEATTRCK”appearsbrieflyonthe
display and RPT lights up.
➮To repeat play of the entire CD,
press the button 4 RPT >once
again.
“REPEAT DISC”appears briefly on the
display and RPT lights up.
Stopping REPEAT
➮To stop the repeat function for the
current track or CD,
press the button 4 RPT >repeat-
edly until “REPEAT OFF”appears
briefly on the display and RPT
goes out.
Random play (MIX)
➮To play the tracks on the current
CD in random order, press the but-
ton 5 MIX >.
“MIXCD”appearsbrieflyonthedisplay
and MIX lights up.
➮To play the tracks of all the inserted
CDs in random order, press the
button 5 MIX >once again.
“MIX ALL”appears briefly on the dis-
play and MIX lights up.
Stopping MIX
➮Press the button 5 MIX >until
“MIX OFF”appears briefly on the
display and MIX goes out.
Scanning all tracks on all CDs
(SCAN)
➮To listen in briefly to all the tracks
on all inserted CDs in ascending
order, hold down the OK button ;
for more than two seconds.
“SCAN”appears on the display.
Stopping SCAN
➮To stop scanning, press the OK
button ;briefly.
Thetrack currently being scanned then
continues play.
Interrupting Play (PAUSE)
➮Press the button 1>.
“PAUSE”appears onthedisplay.
Ending Pause
➮Press the button 1>during the
pause.
Play then resumes.
CD CHANGER MODE

20
Naming CDs
To make it easier for you to recognise
your CDs, the car radio offers an indi-
vidual name option for 99 CDs. The
namesshould haveamaximumofsev-
en digits.
If you attempt to allocate more than 99
names, “FULL”will appear on the dis-
play.
Entering/altering CD names
➮Press the MENU button 8.
➮Use the buttons :to select
“CDC NAME”.
➮Press the or button :.
The name of the CD appears on the
display.
➮Press the or button :.
You are now in the edit mode. If the CD
youhaveselectedisstillunnamed,sev-
en underlines appear on the display.
The current input position flashes.
➮Use the buttons :to select
your characters. If a position is left
blank, you have selected the un-
derline.
➮Use the or button :to pro-
ceed to your next input position.
➮Press the MENU button 8or OK
;to save the name entered.
Clearing a CD name
➮Listen to the CD whose name you
wish to clear.
➮Press the MENU button 8.
➮Use the buttons :to select
“CDC NAME”.
➮Press the or button :.
➮Hold down the MENU button 8.A
beep sounds at the end of four sec-
onds and “DELETE NAME”ap-
pears on the display.
➮Release the MENU button 8.
The CD name is now deleted.
➮Press the OK button ;to return to
the menu.
Clearing all CD names
All CD names saved are deleted.
➮Listen to a CD.
➮Press the MENU button 8.
➮Use the buttons :to select
“CDC NAME”.
➮Press the or button :.
➮Hold down the MENU button 8.
A beep sounds at the end of four
seconds and “DELETE NAME”ap-
pears on the display.
Continue to hold down the MENU
button 8until a second beep
sounds and “DELETEALL”ap-
pears on the display.
➮Release the MENU button 8.
All CD names in the CD changer are
now deleted.
➮Press the OK button ;to return to
the menu.
CD CHANGER MODE