Blaupunkt PORTO CD34 7 644 191 310 User manual

Radio / CD
http://www.blaupunkt.com
Porto CD34 7 644 191 310
San Remo CD34 7 644 176 310
Operating instructions

2
Open here

3
DANSK
ENGLISH DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
11
1235 6
4
7810 9

27
DANSK
ENGLISH DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
1button for opening the de-
tachable control panel (flip-re-
lease panel)
2Button to switch the device on/
off and operate the volume mute
feature
3Volume control
4BND button (band) to select ra-
dio mode as the source,
to select the FM memory banks
and the MW and LW wavebands
TS to start the Travelstore func-
tion
5AUDIO button to adjust the
bass, treble, balance and fader.
To select an equalizer preset.
For adjusting the X-BASS func-
tion and activating/deactivating
it.
CONTROLS
6SRC button to switch between
CD, CD changer (if connected)
andAUX.
: Briefly display the clock
time.
7Arrow buttons
8MENU button to open the basic
settings menu
9Keys 1- 6
:TRAF button to switch traffic in-
formation standby on/off.
RDS button to switch the RDS
function on/off (Radio Data Sys-
tem).
;button to eject the CD from
the device

28
CONTENTS
Notes and accessories .......... 29
Road safety ................................... 29
Installation ..................................... 29
Accessories .................................. 29
Detachable control panel
(flip-release panel) ................. 30
Switching on/off .................... 31
Adjusting the volume ............. 32
Setting the power-on volume ......... 32
Instantaneously decreasing the
volume (mute)................................ 33
Switching the confirmation beep
on/off ............................................ 33
Mute while telephoning .................. 33
Radio mode ............................ 34
Switching to radio mode ................ 34
Convenient RDS functions............. 34
Selecting the waveband /
memory bank................................. 34
Tuning into a station ....................... 35
Setting the sensitivity of station
seek tuning.................................... 35
Storing stations ............................. 36
Storing stations automatically
(Travelstore) .................................. 36
Listening to stored stations ............ 36
Scanning receivable stations
(SCAN) ......................................... 36
Setting the scanning time .............. 36
Programme type (PTY) .................. 37
Optimising radio reception............. 38
Configuring the display .................. 38
Traffic information .................. 39
CD mode ................................ 40
Switching to CD mode .................. 40
Selecting tracks ............................ 40
Fast track selection ....................... 40
Fast searching (audible) ................ 40
Random track play (MIX) ............... 40
Scanning tracks (SCAN) ............... 41
Repeating tracks (REPEAT) ........... 41
Pausing playback (PAUSE)............ 41
Configuring the display .................. 41
Displaying CD text ......................... 41
Traffic announcements in CD mode . 42
Ejecting a CD ................................ 42
CD-changer mode ................. 43
Switching to CD-changer mode..... 43
Selecting CDs ............................... 43
Selecting tracks ............................ 43
Fast searching (audible) ................ 43
Configuring the display .................. 43
Repeating individual tracks or
whole CDs (REPEAT).................... 43
Random track play (MIX) ............... 44
Scanning all tracks on all CDs
(SCAN) ......................................... 44
Pausing playback (PAUSE)............ 44
CLOCK - Time ........................ 45
Sound ..................................... 46
X-BASS .................................. 47
Configuring the level display . 48
External audio sources .......... 48
Specifications ........................ 49

29
DANSK
ENGLISH DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
Thank you for choosing a Blaupunkt
product. We hope you enjoy using this
new piece of equipment.
Please read these operating instruc-
tionsbefore usingthe equipmentfor
the first time.
The Blaupunkt editors are constantly
working on making the operating in-
structions clearer and easier to under-
stand. However, if you still have any
questionsonhowtooperatethedevice,
please contact your dealer or the tele-
phone hotline for your country. You will
findthetelephonenumberprintedatthe
back of this booklet.
We provide a manufacturer guarantee
for our products bought within the Eu-
ropean Union. You can view the guar-
antee conditions at www.blaupunkt.de
or ask for them directly at:
Blaupunkt GmbH, Hotline CM/PSS,
Robert Bosch Str. 200,
D-31139 Hildesheim
Germany
Road safety
Road safety has absolute prior-
ity.Onlyoperateyourcarsoundsys-
tem if the road and traffic conditions
allow you to do so. Familiarise your-
selfwiththe devicebeforesetting off
on your journey.
You should always be able to hear
police, fire and ambulance sirens
from afar. For this reason, listen to
your car sound system at a reason-
able volume level during your jour-
ney.
NOTES AND ACCESSORIES
Installation
Ifyouwanttoinstallyourcarsoundsys-
tem yourself, please read the installa-
tion and connection instructions that
follow these operating instructions.
Accessories
OnlyuseaccessoriesapprovedbyBlau-
punkt.
Remote control
The optional RC08 or RC10 remote
control allows you to access the most
important functions of your car sound
system safely and conveniently from
your steering wheel.
Amplifiers
You can use all Blaupunkt and Velocity
amplifiers.
CD changers
YoucanconnectthefollowingBlaupunkt
CD changers:
CDC A08, IDCA09 and CDCA03.
Compact Drive MP3
You can connect the Compact Drive
MP3 instead of a CD-changer in order
to play MP3 music tracks. If you decide
to connect a Compact Drive MP3, you
willfirstneedtouseacomputertostore
the MP3 music tracks on the Micro-
drive™harddiskthatisinsidetheCom-
pact Drive MP3. Then, when the Com-
pact Drive MP3 is connected to the car
sound system, you can play the tracks
like normal CD music tracks. You can
operate the Compact Drive MP3 in the
same way as a CD changer. Most of
the CD-changer functions can also be
used with the Compact Drive MP3.

30
Note:
●The device will switch off after a
particular time period configured by
you. For further details, read the
section entitled “OFF TIMER” in
this chapter.
●All the current settings are saved.
●Any CD already inserted in the de-
vice remains there.
Attaching the control panel
➮Hold the control panel at approxi-
mately right angles to the device.
➮Slide the control panel into the de-
vice’s guides that are positioned on
the left and right at the lower edge
of the housing. Push the control
panel carefully into the bracket until
it clicks into place.
➮Flip up the control panel and care-
fully press it into the device until it
clicks into place.
1. 2.
DETACHABLE CONTROL PANEL
Detachable control panel
(flip-release panel)
Theft protection
Thedeviceisequippedwithadetacha-
ble control panel (flip-release panel) as
a way of protecting your equipment
against theft. The device is worthless
to a thief without this control panel.
Protectyourdeviceagainsttheftbytak-
ing the control panel with you whenev-
er you leave your vehicle. Do not leave
the control panel inside your vehicle -
not even in a hiding place.
The control panel has been designed
to be easy to use.
Note:
●Never drop the control panel.
●Never expose the control panel to
direct sunlight or other heat sourc-
es.
●Avoid direct skin contact with the
control panel’s electrical contacts. If
necessary, clean the contacts with
a lint-free cloth and some alcohol.
Detaching the control panel
➮Press the button 1.
The control panel opens out towards
you.
➮Hold the control panel by its right
side and then pull the control panel
straight out of the bracket.

31
DANSK
ENGLISH DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
Switching on/off
Therearevariouswaysofswitchingthe
device on/off:
Switching the device on/off using
the vehicle ignition
If the device is correctly connected to
the vehicle’s ignition and you did not
switch it off by pressing button 2, the
devicewillswitchon/off simultaneously
with the ignition.
Switching the device on/off using
the detachable control panel
➮Detach the control panel.
The device switches off.
Note:
●The device will switch off after a
preset time period. For further de-
tails, read the section entitled “Off
timer”.
➮Attach the control panel again.
The device switches on. The last set-
ting(radio,CD,CDchangerorAUX)will
be reactivated.
Switching on/off using button 2
➮To switch on the device, press but-
ton 2.
➮To switch off the device, press and
hold down button 2for longer
than two seconds.
The device switches off.
Note:
●To protect the vehicle battery, the
device will switch off automatically
after one hour if the ignition is off.
Note:
●When attaching the control panel,
make sure you do not press the
display.
If the device was still switched on when
you removed the control panel, it will
automatically switch on with the last
settings activated (i.e. radio, CD, CD
changer or AUX) when the panel is re-
placed.
Off timer
After you detach the control panel, the
device will switch off after a preset time
period.Youcansetthistimetobetween
0 and 30 seconds.
➮Press the MENU button 8.
➮Press the or button 7re-
peatedly until “OFF TIMER” ap-
pears in the display.
➮Adjust the time using the but-
tons 7.
When you have finished making your
changes,
➮press the MENU button 8twice.
Note:
●If you set the off-timer to 0 sec-
onds, the device will switch off im-
mediately as soon as you open the
control panel.
CONTROL PANEL SWITCHING ON/OFF

32
Switching on by inserting a CD
If the device is switched off and there is
no CD present in the drive,
➮press the button 1.
The flip-release panel opens.
➮Gently insert the CD with its printed
side uppermost into the drive until
you feel some resistance.
The drive draws in the CD automatical-
ly.
You must not hinder or assist the drive
as it draws in the CD.
➮Gently close the control panel
whilst exerting a little pressure until
you feel it click into place.
Thedeviceswitchesonandstartsplay-
ing the CD.
Note:
●If the ignition was switched off be-
fore you inserted the CD, you will
first have to switch on the device
by pressing button 2in order to
start playing the CD.
Adjusting the volume
Youcanadjustthevolumeinstepsfrom
0 (off) to 66 (maximum).
To increase the volume,
➮turn the volume control 3clock-
wise.
To decrease the volume,
➮turn the volume control 3anti-
clockwise.
Setting the power-on volume
You can set the device’s default power-
on volume.
➮Press the MENU button 8.
➮Press the or button 7re-
peatedly until “ON VOLUME” ap-
pears in the display.
➮Adjust the power-on volume using
the buttons 7.
To helpyouadjustthesettingmoreeas-
ily, the device will increase or decrease
thevolumeasyoumakeyourchanges.
Ifyouchangethesettingto“LASTVOL”,
the volume when the device switches
on will be the same as the volume level
that was set the last time you switched
the device off.
Note:
●To protect your hearing, the power-
on volume is limited to a value of
“38”. If the volume level was higher
than this when the device was last
switched off and the “LAST VOL”
setting is activated, the system will
reset the volume to “38” when you
switch the device on again.
SWITCHING ON/OFF ADJUSTING THE VOLUME

33
DANSK
ENGLISH DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
When you have finished making your
changes,
➮press the MENU button 8twice.
Instantaneously decreasing the
volume (mute)
You can instantaneously decrease the
volume (mute) to a level preset by you.
➮Briefly press button 2.
“MUTE” appears in the display.
Cancelling mute
To return to your previously set volume
level,
➮briefly press button 2again.
Setting the mute level
You can set the device’s mute volume
level.
➮Press the MENU button 8.
➮Press the or button 7re-
peatedly until “MUTE LVL” appears
in the display.
➮Adjust the mute level using the
buttons 7.
When you have finished making your
changes,
➮press the MENU button 8twice.
ADJUSTING THE VOLUME
Switching the confirmation beep
on/off
The system will output a confirmation
beep for some functions if you keep a
buttonpresseddownforlongerthantwo
seconds, for instance, when assigning
a radio station to a station preset but-
ton. You can switch the beep on/off.
➮Press the MENU button 8.
➮Press the or button 7re-
peatedly until “BEEP” appears in
the display.
➮Configure the beep using the
buttons 7. “OFF” means the beep
is off and “ON” means the beep is
switched on.
When you have finished making your
changes,
➮press the MENU button 8.
Mute while telephoning
Ifyourcaraudiosystemisequippedwith
a mobile telephone, it will automatically
switchtomutewhenyouusethephone.
This will only work if the mobile phone
is connected to the car audio system
as described in the installation instruc-
tions.
The volume will be reduced to the con-
figured volume mute level.

34
Radio mode
This device is equipped with an RDS
radio receiver. Many of the receivable
FM stations broadcast a signal that not
only carries the programme but also
additional information such as the sta-
tion name and programme type (PTY).
The station name appears in the dis-
play as soon as the tuner receives it.
Switching to radio mode
If you are in CD, CD changer or AUX
mode,
➮press the BND•TS button 4.
or
➮press the SRC () button 6re-
peatedly until the memory bank
(e.g. “FM1”) appears in the display.
Convenient RDS functions
The convenient RDS functions AF (Al-
ternative Frequency) and REGIONAL
extend your radio’s range of functions.
●AF: If you activate this RDS func-
tion, the radio automatically tunes
into the best receivable frequency
for the station that is currently set.
●REGIONAL:At certain times, some
radio stations divide their pro-
gramme into regional programmes
providing different content. You can
use the REGIONAL function to pre-
vent the car radio from switching to
alternative frequencies that are
transmitting different programme
content.
Note:
●REGIONAL must be activated/de-
activated separately in the menu.
Switching REGIONAL on/off
➮Press the MENU button 8.
➮Press the or button 7re-
peatedly until “REG” appears in the
display. “OFF” or “ON” is displayed
alongside “REG”.
➮To switch REGIONAL on/off, press
the or button 7.
➮Press the MENU button 8.
Switching the RDS function on/off
If you want to use the RDS functions
(AF and REGIONAL),
➮press and hold down the TRAF/
RDS button :for longer than two
seconds.
The RDS functions are active when an
RDS symbol lights up in the display.
Selecting the waveband /
memory bank
This device can receive programmes
broadcastovertheFMfrequencyrange
as well as the MW and LW (AM) wave-
bands. There are three memory banks
available for the FM waveband (FM1,
FM2 and FMT) and one for each of the
MW and LW wavebands.
Sixstationscanbestoredineachmem-
ory bank.
RADIO MODE

35
DANSK
ENGLISH DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
To switch between the FM memory
banks (FM1, FM2 and FMT) and the
MW and LW wavebands,
➮briefly press the BND•TS button
4.
Tuning into a station
There are various ways of tuning into a
station.
Automatic station seek tuning
➮Press the or button 7.
The radio tunes into the next receiva-
ble station.
Tuning into stations manually
Youcanalso tuneintostations manual-
ly.
Note:
●You can only tune into stations
manually if the RDS function is de-
activated.
➮Press the or button 7.
Browsing through broadcasting
networks (only FM)
If a radio station provides several pro-
grammes,youhavetheoptionofbrows-
ing through its so-called “broadcasting
network”.
Note:
●The RDS function must be activat-
ed before you can use this feature.
➮Press the or button 7to
switch to the next station on the
broadcasting network.
Note:
●When using this feature, you will
only be able to switch to stations
that you have received once before
already. To receive the stations,
use the Scan or Travelstore func-
tion.
Setting the sensitivity of station
seek tuning
You can choose whether the radio
should only tune into stations providing
good reception or whether it can also
tune into those with a weak reception.
➮Press the MENU button 8.
➮Press the or button 7re-
peatedly until “SENS” appears in
the display.
➮Press the button 7.
Thedisplayshowsthecurrentlysetsen-
sitivitylevel.“SENSHI6”meansthatthe
tuner is set to the highest sensitivity
setting. “SENS LO1” means it is set to
the lowest sensitivity setting.
➮Set the sensitivity level that you
want using the buttons 7.
When you have finished making your
changes,
➮press the MENU button 8.
Note:
●You can set different sensitivity lev-
els for FM and MW or LW (AM).
RADIO MODE

36
Storing stations
Storing stations manually
➮Select the memory bank (i.e. FM1,
FM2, FMT) that you want or one of
the wavebands (MW or LW).
➮Tune into the station that you want.
➮Press and hold down one of the
station buttons 1 - 6 9for longer
than two seconds to assign the sta-
tion to that button.
Storing stations automatically
(Travelstore)
You can automatically store the six sta-
tionsprovidingthebestreceptionin the
region(onlyFM).Thestationsarestored
in the FMT memory bank.
Note:
●Any stations that were previously
stored in this memory bank are de-
leted in the process.
➮Press and hold down the BND•TS
button 4for longer than two sec-
onds.
The storing procedure begins. “FM
TSTORE” appears in the display. After
the process has completed, the radio
will play the station that is stored in
memory location 1 of the FMT memory
bank.
Listening to stored stations
➮Select the memory bank or wave-
band.
➮Press the station button 1 - 6 9
that corresponds to the station that
you want to listen to.
Scanning receivable stations
(SCAN)
You can use the scan function to briefly
playallthereceivablestations.Youcan
set the scanning time in the menu to
between 5 and 30 seconds.
Starting SCAN
➮Press and hold down the MENU
button 8for longer than two sec-
onds.
Scanning begins. “SCAN” appears
brieflyinthedisplayfollowedbyaflash-
ing display of the current station name
or frequency.
Cancelling SCAN and continuing
listening to a station
➮Press the MENU button 8.
Scanningstopsandtheradiocontinues
playingthestationthatittunedinto last.
Setting the scanning time
➮Press the MENU button 8.
➮Press the or button 7re-
peatedly until “SCAN TIME” ap-
pears in the display.
➮Set the scanning time that you
want using the buttons 7.
RADIO MODE

37
DANSK
ENGLISH DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
When you have finished making your
changes,
➮press the MENU button 8twice.
Note:
●The scanning time that you set is
also applied by the system to scan-
ning carried out in CD and CD-
changer mode.
Programme type (PTY)
Besides transmitting the station name,
someFMstationsalsoprovideinforma-
tiononthetype ofprogrammethatthey
are broadcasting. Your car radio can
receive and display this information.
Forexample,theprogrammetypescan
be:
CULTURE TRAVEL JAZZ
SPORT NEWS POP
ROCK CLASSICS
You can use the PTY function to select
stationsofaparticularprogrammetype.
PTY-EON
If you specify the programme type and
start seek tuning, the radio will switch
from the current station to a station of
the selected programme type.
Note:
●If the tuner does not find a station
that corresponds to the selected
programme type, you will hear a
beep and “NO PTY” appears briefly
in the display. The radio will then
retune to the station that it received
last.
●If the tuned radio station or another
station on the broadcasting net-
work broadcasts your selected pro-
gramme type at a later point in
time, the radio will automatically
switch from the currently tuned sta-
tion or from CD mode or CD-
changer mode to the station whose
programme type matches the one
you selected.
Switching PTY on/off
➮Press the MENU button 8.
➮Press the or button 7re-
peatedly until “PTY ON” or “PTY
OFF” appears in the display.
➮Press the or button 7to
switch PTY ON or OFF.
➮Press the MENU button 8.
Selecting the PTY language
You can select the language in which
the programme types are displayed.
The following are available:
“DEUTSCH”, “ENGLISH” and
“FRANÇAIS”.
➮Press the MENU button 8.
➮Press the or button 7re-
peatedly until “PTY LANG” appears
in the display.
➮Set your preferred language using
the buttons 7.
When you have finished making your
changes,
➮press the MENU button 8twice.
RADIO MODE

38
Selecting a programme type and
starting seek tuning
➮Press the or button 7.
The current programme type appears
in the display.
➮If you want to select another pro-
gramme type, you can do so by
pressing the or button 7
whilst this display is visible.
The selected programme type appears
briefly in the display.
➮Press the or button 7to
start seek tuning.
The radio will then tune into the next
station that it finds that corresponds to
your selected programme type.
Optimising radio reception
Treble reduction feature during
interference (HICUT)
TheHICUTfunctionimprovesreception
during poor radio reception (only FM).
If interference occurs, the system auto-
maticallyreducesthetreblethusreduc-
ing the interference level.
Switching HICUT on/off
➮Press the MENU button 8.
➮Press the or button 7re-
peatedly until “HICUT” appears in
the display.
➮Press the or button 7to ad-
just the HICUT setting.
“HICUT 0” means that no automatic re-
duction of the treble and interference
level will be made; “HICUT 1” means
thatamaximumreductionwillbemade.
➮Press the MENU button 8.
Configuring the display
In radio mode you have the option of
displaying the waveband together with
thememorylocationandthetimeorthe
station name.
➮Press the MENU button 8.
➮Press the or button 7re-
peatedly until “TUN DISP” appears
in the display.
➮Press the or button 7to
switch between “CLOCK” and
“FREQUENCY”.
Select “FREQUENCY” if you want to
display the station name / frequency.
➮Press the MENU button 8twice.
RADIO MODE

39
DANSK
ENGLISH DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
Traffic information
Your device is equipped with an RDS-
EON receiver. EON stands for En-
hanced Other Network.
Whenever a traffic announcement (TA)
is broadcast, the system switches au-
tomatically from a station that does not
provide traffic reports to the appropri-
ate traffic information station within the
broadcasting network that does.
Oncethetrafficreporthasbeenplayed,
the system will switch back to the pro-
gramme that you were listening to be-
fore.
Switching traffic information
priority on/off
➮Briefly press the TRAF button :.
Traffic announcement priority is active
when a traffic-jam symbol lights up in
the display.
Note:
You will hear a warning sound:
●if you leave the reception area of a
traffic information station that you
are currently listening to.
●if, while listening to a CD or CD in
the changer, you leave the recep-
tion area of a traffic information sta-
tion that the system is tuned into,
and the subsequent automatic
search cannot find a new traffic in-
formation station.
●if you retune the radio from a traffic
information station to a station that
does not broadcast traffic informa-
tion.
If you hear the warning sound, you can
either switch off traffic information pri-
ority or tune into a station that broad-
casts traffic information.
Setting the volume for traffic
announcements
➮Press the MENU button 8.
➮Press the or button 7re-
peatedly until “TA VOLUME” ap-
pears in the display.
➮Adjust the volume using the
buttons 7.
When you have finished making your
changes,
➮press the MENU button 8twice.
Note:
●Using the volume control 3, you
can also adjust the volume during
a traffic announcement for the du-
ration of that announcement.
Note:
●You can adjust the sound settings
and volume distribution settings for
traffic announcements. For further
details, refer to the chapter entitled
“Sound”.
TRAFFIC INFORMATION

40
CD mode
You can use this device to play stand-
ard audio CDs, CD-Rs and CD-RWs
with a diameter of 12 or 8 cm.
Risk of severe damage to the
CD drive!
ContouredCDs(shapeCDs)arenot
suitable for playback in this unit.
We accept no responsibility for any
damage to the CD drive that may
occur as a result of the use of un-
suitable CDs.
Switching to CD mode
●If there is no CD inserted in the
drive,
➮press the button 1.
The flip-release panel opens.
➮Gently insert the CD with its printed
side uppermost into the drive until
you feel some resistance.
The drive draws in the CD automatical-
ly.
You must not hinder or assist the drive
as it draws in the CD.
➮Gently close the control panel
whilst exerting a little pressure until
you feel it click into place.
The CD starts playing.
Note:
●If the ignition was switched off be-
fore you inserted the CD, you will
first have to switch on the device
by pressing button 2in order to
start playing the CD.
●If a CD is already inserted in the
drive,
➮press the SRC () button 6re-
peatedly until “CD” appears in the
display.
Playbackbeginsfromthepointatwhich
it was last interrupted.
Selecting tracks
➮Press one of the arrow buttons 7
to select the next or previous track.
Ifyoupressthe or button7once,
the player will play the current track
again from the beginning.
Fast track selection
To quickly select tracks backwards or
forwards,
➮press and hold down one of the /
buttons 7until fast-reverse /
fast-forward track selection begins.
Fast searching (audible)
To fast search backwards or forwards,
➮press and hold down one of the
buttons 7until fast search-
ing backwards / forwards begins.
Random track play (MIX)
➮Press the 5MIX button 9.
“MIX CD” appears briefly in the display
and the MIX symbol lights up. The next
randomly selected track will then be
played.
Cancelling MIX
➮Press the 5MIX button 9again.
“MIX OFF” appears briefly in the dis-
play and the MIX symbol disappears.
CD MODE

41
DANSK
ENGLISH DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
Scanning tracks (SCAN)
Youcanbrieflyplayallthetracksonthe
CD.
➮Press and hold down the MENU
button 8for longer than two sec-
onds.
The next track will then be played brief-
ly.
Note:
●You can set the scanning time. For
further details, please read the sec-
tion entitled “Setting the scanning
time” in the “Radio mode” chapter.
Stopping SCAN and continuing
listening to a track
➮To stop scanning, press the MENU
button 8.
The currently scanned track will then
continue to be played normally.
Repeating tracks (REPEAT)
If you want to repeat a track,
➮press the 4 RPT button 9.
“RPT TRCK” appears briefly in the dis-
playandtheRPTsymbollightsup.The
track is repeated continuously until you
deactivate RPT.
Cancelling REPEAT
Ifyouwanttodeactivatetherepeatfunc-
tion,
➮press the 4 RPT button 9again.
“RPT OFF” appears briefly in the dis-
play and the RPT symbol disappears.
Normal playback is then resumed.
Pausing playback (PAUSE)
➮Press the 3button 9.
“PAUSE” appears in the display.
Cancelling pause
➮Press the 3button 9while in
pause mode.
Playback is resumed.
Configuring the display
You can choose between two display
types for CD mode:
•Track number and clock time
(“CLOCK”)
•Track number and playing time
(“PLAYTIME”)
➮Press the MENU button 8.
➮Press the or button 7re-
peatedly until “CD DISP” appears
in the display.
➮Press the or button 7to
switch between “PLAYTIME” and
“CLOCK”.
➮Press the MENU button 8twice.
Displaying CD text
SomeCDsincludeCDtext.TheCDtext
might contain the names of the artist,
album and tracks.
You can allow the CD text to be dis-
played as scrolling text every time you
switch to another track. The standard
displaywillappearagainafterthewhole
CD text has been shown once. For fur-
ther information, read the section enti-
tled “Configuring the display”.
CD MODE

42
Switching CD text on/off
➮Press the MENU button 8.
➮Press the or button 7re-
peatedly until “CD TEXT” appears
in the display.
➮Switch the CD text function on
(“TEXT ON”) or off (“TEXT OFF”)
using the or button 7.
When you have finished making your
changes,
➮press the MENU button 8twice.
Traffic announcements in CD
mode
If you wish to receive traffic announce-
ments in CD mode,
➮press the TRAF button :.
Traffic announcement priority is active
when a traffic-jam symbol lights up in
the display. For further details, read the
chapter entitled “Traffic information re-
ception”.
Ejecting a CD
➮Press the button 1.
The flip-release panel opens out to-
wards you.
➮Press the eject button ;next to
the CD compartment.
The CD is ejected.
➮Remove the CD and close the con-
trol panel.
Note:
●If a CD is ejected, the drive will au-
tomatically draw it back in again
after 10 seconds.
●You can also eject CDs whilst the
device is switched off or whilst an-
other audio source is activated.
CD MODE

43
DANSK
ENGLISH DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
CD-changer mode
Note:
●Information on handling CDs, in-
serting CDs and operating the CD
changer can be found in the oper-
ating instructions supplied with
your CD changer.
Switching to CD-changer mode
➮Press the SRC () button 6re-
peatedly until “CHANGER” ap-
pears in the display.
The device starts playing the first CD
that the CD changer detects.
Selecting CDs
To move up or down to another CD,
➮press the or button 7once
or several times.
Note:
●The device will ignore empty CD
slots in the changer and slots con-
taining invalid CDs.
Selecting tracks
To move up or down to another track
on the current CD,
➮press the or button 7once
or several times.
Fast searching (audible)
To fast search backwards or forwards,
➮press and hold down one of the
buttons 7until fast search-
ing backwards / forwards begins.
Configuring the display
There are five display options available
for CD-changer mode:
•Track number and playing time
•Track number and clock time
•CD number and track number
•CD number and playing time
•CD number and clock time
➮Press the MENU button 8.
➮Press the or button 7re-
peatedly until “CDC DISP” appears
in the display.
➮Press the or button 7re-
peatedly until the option that you
want appears in the display.
➮Press the MENU button 8twice.
Repeating individual tracks or
whole CDs (REPEAT)
To repeat the current track,
➮briefly press the 4 RPT button 9.
“RPT TRCK” appears briefly and RPT
lights up in the display.
To repeat the current CD,
➮press and hold down the 4 RPT
button 9for longer than two sec-
onds.
“RPT DISC” appears briefly and RPT
lights up in the display.
CD-CHANGER MODE