Blaupunkt Honolulu CD50 User manual

Radio / CD
Honolulu CD50
Operating instructions

3
FRANÇAIS ENGLISH
ESPAÑOL
PORTUGUÊS
3
2
10
1
4
5
11
6
798
1213141516

4
1button to unlock release
panel
2Volume control
3ON button, switches the unit
on/off, mute
4FM button, selects the FM
memory bank
5AM button, selects the AM
waveband
6Display
7button, displays the time
DIS, changes display contents
8MENU button, accesses the
menu for basic settings
9button, opens the flip release
panel
:Cursor button block
;OK button, confirms menu se-
lections and starts the SCAN
function
<EQ button, adjusts the BASS
CENTER frequency
=AUD button, adjusts bass, tre-
ble, balance and fader
LD, switches the Loudness func-
tion on/off
>1to 6station buttons
?TS button, starts the Travelstore
function
@CD•C button, switches sound
source between radio, CD and
CD changer (if connected)
OPERATING ELEMENTS

5
FRANÇAIS ENGLISH
ESPAÑOL
PORTUGUÊS
CONTENTS
Important information .............. 6
Traffic safety .................................... 6
Installation ....................................... 6
Accessories .................................... 6
Guarantee ....................................... 6
International telephone information ... 6
Removable front panel ............. 7
Theft protection system ................... 7
Removing the operating panel.......... 7
Replacing the operating panel ......... 7
Switching the car audio
system on/off ........................... 8
Volume control ......................... 9
Adjusting the power-on volume ........ 9
Mute ............................................... 9
Mute during telephone operation ..... 9
Adjusting the volume of the beep ... 10
Radio operation...................... 10
Switching to the radio mode .......... 10
Selecting wavebands/memory
banks ............................................ 10
Tuning into radio stations ............... 10
Adjusting seek tuning sensitivity ..... 11
Storing radio stations..................... 11
Storing radio stations automatically
(Travelstore) .................................. 11
Recalling stored radio stations ....... 11
Scanning the radio stations within
reception range (SCAN) ................ 11
Adjusting the scan time ................. 12
Tuner configuration ........................ 12
CD player operation ............... 13
Starting CD player operation ......... 13
Selecting tracks ............................ 13
Audible fast forward/reverse
(CUE/REVIEW) ............................. 13
Playing tracks in random order
(MIX) ............................................. 13
Scanning tracks (SCAN) ............... 13
Repeating individual tracks
(REPEAT) ...................................... 14
Interrupting playback (PAUSE) ...... 14
Switching the display mode ........... 14
CD changer operation............ 14
Starting CD changer operation ...... 14
Selecting CDs ............................... 14
Selecting tracks ............................ 14
Audible fast forward/reverse
(CUE/REVIEW) ............................. 14
Switching the display mode ........... 14
Repeating individual tracks or
entire CDs (REPEAT) .................... 15
Playing tracks in random order
(MIX) ............................................. 15
Scanning all of the tracks on all
of the CDs (SCAN) ....................... 15
Interrupting playback (PAUSE) ...... 15
Clock ...................................... 16
Adjusting the tone and
balance/fader ........................ 17
Switching Loudness on/off .... 17
BASS CENTER frequency
adjustment ............................. 18
Adjusting the spectrometer ............ 18
External audio sources .......... 19
Switching the AUX output on/off .... 19
Specifications ........................ 19
Installation instructions .......... 71

6
Important information
Before you use your car audio system
for the first time, please take the time to
read the instruction manual carefully
and make yourself familiar with the au-
dioequipment.Keepthismanualhandy
in your car for future reference.
Traffic safety
Traffic safety is always the top
priority. Do not attempt to operate
yourcaraudiosystemunlessthetraf-
fic conditions permit. Familiarize
yourself with the equipment before
you start driving.
Always make sure that you are still
able to hear any warning signals
coming from outside the vehicle,
such as police or fire engine sirens,
at all times.
As a result, please always select a
moderatevolumeforplayingyourcar
audio system while you are driving.
Installation
If you would like to install your new car
stereoyourselforaddotheraudiocom-
ponents to the existing ones, then
pleasereadthe instructions oninstalla-
tion and connection at the end of this
manual carefully.
Accessories
UseonlyBlaupunkt-approvedaccesso-
ries.
Remote control unit
The optionally available RC 08 infrared
remote control unit allows you to con-
veniently operate the most important
system functions from the steering
wheel.
IMPORTANT INFORMATION
Amplifiers
All Blaupunkt amplifiers can be used.
CD changers
ThefollowingCDchangerscanbecon-
nected directly: CDC A 06, CDC A 08,
CDC A 072 and IDC A 09.
The CDC A 05 and CDC A 071 can be
connectedwithanadaptercable(Blau-
punkt no. 7 607 889 093).
Guarantee
The scope of the guarantee is deter-
mined by the laws in the country where
the unit is purchased.
Regardless of the legal guarantee reg-
ulations, Blaupunkt affords a 12-month
guarantee.
If you have any questions about the
guarantee, please contact your author-
ised Blaupunkt dealer.Your cash regis-
ter receipt is a valid guarantee coupon.
International telephone
information
Have you got any questions on the op-
eration of this equipment or do you re-
quire more information?
Give us a call!
You will find the international telephone
andfaxnumbersonthelastpageofthis
manual.

7
FRANÇAIS ENGLISH
ESPAÑOL
PORTUGUÊS
Remo able front panel
Theft protection system
To prevent your car audio system from
being stolen, it has been equipped with
a removable front panel (flip release
panel). Without the front panel, the car
audio system is useless to thieves.
Protect your car audio system against
theft and take the operating panel with
you each time you leave the vehicle.
Neverleavethereleasepanelinthecar,
even if it is well hidden. The panel has
been designed so that it is easy to re-
move.
Notes:
●Do not drop the release panel.
●Do not expose the release panel to
direct sunlight or other heat sourc-
es.
●Store the release panel in the case
supplied.
Removing the operating panel
➮Press 1.
The release panel will unlock.
1
➮First pull the operating panel for-
ward and then slide it to the left to
remove it.
●When you remove the operating
panel, the car audio system will au-
tomatically switch off.
●All of the settings will remain
stored.
●A CD inserted into the car audio
system will remain in place.
Replacing the operating panel
➮Slide the operating panel into the
guides from left to right.
➮Press the left-hand side of the pan-
el onto the car audio system until it
locks into place.
Note:
●While replacing the panel, be care-
ful not to press on the display.
If the car audio system was on when
you removed the panel, it will automat-
ically switch back on using the same
settings when you replace it (radio, CD
player or CD changer).
REMOVABLE FRONT PANEL

8
Switching the car audio system on
by inserting a CD
If the system is switched off and there
is no CD in the CD player,
➮press 9.
The flip release panel will open.
➮Insert the CD into the CD player
with the label facing upwards until
you feel resistance. Do not use
force.
TheCD willbepulledautomaticallyinto
the CD player.
Do not attempt to assist or prevent this
process.
➮Press the operating panel closed
gently until you feel it click into
place.
The audio system will switch on. CD
playback will begin.
Switching the car audio
system on/off
The car audio system can be switched
on/off in a number of ways.
Switching the car audio system on/
off with the ignition
If the car audio system has been con-
nected to your vehicle ignition, it is pos-
sible to switch it on and off with the igni-
tion.
You can also switch the car audio sys-
temonwhentheignitionisswitchedoff.
➮Press down and hold 3until the
car audio system switches on.
Note:
To prevent the car battery from running
down, the radio will switch off again au-
tomatically after one hour.
Switching the car audio system on/
off with the removable front panel
➮Remove the release panel.
The car audio system will switch off.
➮Replace the release panel.
The car audio system will switch on
again.Thelast settings used(radio,CD
playeror CDchanger)willbeactivated.
Switching the car audio system on/
off by pressing 3
➮Press 3to switch the car audio
system on.
➮Press 3for longer than 2 seconds
to switch the car audio system off
again.
The system will then switch off.
SWITCHING ON/OFF

9
FRANÇAIS ENGLISH
ESPAÑOL
PORTUGUÊS
Volume control
The car audio system volume can be
adjustedtolevelsfrom0(off)to66(max-
imum).
➮To increase the volume, turn the
volume control knob 2to the
right.
➮To decrease the volume, turn the
volume control knob 2to the left.
Ad usting the power-on volume
It is possible to adjust the volume at
whichthecaraudiosystemswitcheson.
➮Press MENU 8.
➮Press :repeatedly until “ON
VOLUME” appears in the display.
➮Press :to adjust the vol-
ume.
If you adjust this setting to “0”, the car
audio system will switch on at the vol-
ume used before it was switched off.
Warning of serious injury
If the power-on volume is set to the
maximum level, it may be extremely
loud when the car audio system is
switched on.
Ifthepower-onvolumeissetto0and
the car audio system was played at
maximum volume before it was
switchedoff,itmaybeextremelyloud
when the car audio system is
switched back on.This could result
in serious injury to your ears!
➮Once you have selected the de-
sired settings, press MENU 8or
OK ;.
VOLUME CONTROL
Mute
You can reduce the volume of the car
audio system immediately (mute).
➮Press 3briefly.
“MUTE” will appear in the display.
Selecting the mute level
It is possible to select the mute level.
➮Press MENU 8.
➮Press :repeatedly until
“MUTE LEVEL” appears in the dis-
play.
➮Press :to select the mute
level.
➮Once you have made your selec-
tion, press MENU 8or OK ;.
Mute during telephone
operation
If your car audio system has been
equippedwithamobiletelephone,itwill
automatically switch to mute when you
use the phone. This will not work un-
less the mobile phone is connected to
the car audio system as described in
the installation instructions.
The car audio system will be muted to
the mute level selected.

10
Ad usting the volume of the
beep
For a number of functions you will hear
abeepifyoupressakeyforlongerthan
2 seconds, e.g. if you want to store a
radiostationonastationpreset.Youcan
adjust the volume level of this beep.
➮Press MENU 8.
➮Press :repeatedly until
“BEEP” appears in the display.
➮Press :to adjust the vol-
ume. “0” means the beep volume is
off, “9” means the beep volume is
adjusted to the maximum volume.
➮Once you have adjusted the set-
tings, press MENU 8or OK ;.
Radio operation
Switching to the radio mode
If you are currently using the CD player
or CD changer,
➮press CD•C @repeatedly until
“RADIO” appears in the display.
Selecting wavebands/memory
banks
Using this car audio system, you can
tune into radio stations on the FM and
AM wavebands.There are three mem-
orybanksfortheFMwavebandandone
memory bank for AM.
You can store six stations in each of
these memory banks.
➮To switch between the different FM
memory banks , press FM 4.
➮To select the AM waveband, press
AM 5.
Tuning into radio stations
You can tune into radio stations in a
number of different ways.
Automatic seek tuning
➮Press or :.
The radio will tune into the next availa-
ble station within reception range.
Manual station selection
You can also tune into radio stations
manually.
➮Press or :.
RADIO OPERATIONVOLUME CONTROL

11
FRANÇAIS ENGLISH
ESPAÑOL
PORTUGUÊS
Ad usting seek tuning sensitivity
It is also possible to adjust the sensitiv-
ity of the seek tuning function to tune
theradiointostationswithstrongrecep-
tion signals only, or to those with weak-
er reception signals as well.
➮Press MENU 8.
➮Press :repeatedly until
“SENS” appears in the display.
➮Press :.
The currently selected setting will ap-
pear in the display.“SENS HI”indicates
the highest level of sensitivity, “SENS
LO”thelowest.Ifyouselect“SENSLO”,
“lo” will light up in the display.
➮Press :to adjust the desired
sensitivity.
➮Once you have made your selec-
tion, press MENU 8or OK ;.
Storing radio stations
Storing radio stations manually
➮Select the desired memory bank
FM1, FM2 or FMT or the wave-
bandAM.
➮Tune the radio into the desired sta-
tion.
➮Press and hold down one of the
station preset buttons 1to 6>on
which you want to store the radio
station for longer than two sec-
onds.
Storing radio stations
automatically (Travelstore)
You can automatically store the six ra-
diostationswiththestrongestreception
in your current reception area. These
stationswillbestoredintheFMTorAM
memorybank depending onthe select-
ed waveband.
Note:
Any stations stored previously in the
memory bank will be deleted.
➮Press TS ?briefly.
The storing process will begin.“TRAV-
EL-STORE” will appear in the display.
Afterthestationshavebeenstored,the
radiowillautomaticallybegintoplaythe
station stored on preset button 1 of the
respective memory bank.
Recalling stored radio stations
➮Select the desired station memory
bank.
➮Press the station button 1to 6>
on which you have stored the de-
sired radio station.
Scanning the radio stations
within reception range (SCAN)
You can scan all of the radio stations
currently within your reception range.
The scan time can be set in the menu
to play from five to 30 seconds.
Starting SCAN
➮Press and hold down OK ;for
longer than two seconds.
RADIO OPERATION

12
SCAN will begin. “SCAN” will appear
briefly in the display, followed by the
flashing frequency of the radio station
currently being scanned.
Stopping the SCAN function,
continuing to listen to the radio
station scanned
➮Press OK ;.
SCAN will end and the last station
scanned will continue playing.
Ad usting the scan time
➮Press MENU 8.
➮Press :repeatedly until
“SCANTIME” appears in the dis-
play.
➮Press :to set the scan time
as desired.
➮Once you have made your selec-
tion, press MENU 8or OK ;.
Note:
The scan time selected also applies to
the SCAN function for CD player and
CD changer operation.
Tuner configuration
This unit is equipped with a multiband
tuner.This means that the tuner can be
configuredtosuitrequirementsthatare
specific to various countries.The coun-
tries/regions available are: USA, Eu-
rope, Asia and Thailand.The tuner will
only function optimally if it is configured
for the country/region in which the unit
is being operated.
Configuring the tuner
➮Press MENU 8.
➮Press :repeatedly until “FM
TUNER” appears in the display.
➮Press or :to set the country/
region.
➮Once you have made your selec-
tion, press MENU 8or OK ;.
RADIO OPERATION

13
FRANÇAIS ENGLISH
ESPAÑOL
PORTUGUÊS
CD player operation
The CD player in this car audio system
can be used to play conventional mu-
sic CDs with a diameter of 12 cm.
Danger of damage to the CD
player!
CD singles with a diameter of 8 cm
and contour CDs (shape CDs) are
notsuitableforusewiththisCDplay-
er.
We assume no liability for any dam-
age done to the CD player resulting
from the use of unsuitable CDs.
Starting CD player operation
●If there is no CD in the player,
➮press 9.
The flip release panel will open.
➮Insert a CD into the player with the
label facing up until you feel resist-
ance. Do not use force.
The CD will be pulled into the player
automatically.
Do not attempt to assist or prevent this
process.
➮Press the operating panel closed
gently until you feel it click into
place.
CD playback will begin.
●If there already is a CD inserted
into the player,
➮press CD•C @repeatedly until
“CD” appears in the display.
Playbackwillresumeatthepointwhere
it was interrupted.
Selecting tracks
➮Press a key on the cursor block :
to select the next or the previous
track.
Press or :once to restart the
same track.
Audible fast forward/reverse
(CUE/REVIEW)
To start Cue or Review,
➮press and hold down either or
:until the process begins.
Playing tracks in random order
(MIX)
➮Press 5MIX >.
“MIX CD” will appear briefly in the dis-
play, the MIX symbol will light up in the
display. The next track played will be
selected at random.
Stopping the MIX function
➮Press 5MIX >again.
“MIX OFF” will appear briefly in the dis-
play and the MIX symbol will no longer
light up.
Scanning tracks (SCAN)
You can scan all of the tracks on the
CD.
➮Press OK ;for longer than two
seconds. Scanning will begin with
the next track.
Note:
It is possible to adjust the scan time.
For more information, read the section
on“Adjustingthescantime”inthechap-
ter on “Radio Operation”.
CD PLAYER OPERATION

14
Stopping the SCAN function, continue
listening to the current track
➮To stop the SCAN function, press
OK ;.
The track currently scanned will contin-
ue playing.
Repeating individual tracks
(REPEAT)
➮To repeat the track currently play-
ing, press 4RPT >.
“REPEAT TRCK” will appear briefly in
thedisplay,the RPT symbol willlightup
in the display.The track will continue to
repeat until RPT is deactivated.
Stopping the REPEAT function
➮If you want to stop the REPEAT
function, press 4RPT >again.
“REPEATOFF”willappearbrieflyinthe
displayandtheRPTsymbolwillnolong-
er light up. CD playback will resume
normally.
Interrupting playback (PAUSE)
➮Press 3>.
“PAUSE” will appear in the display.
Stopping PAUSE
➮Press 3>during the pause.
Playback will resume.
Switching the display mode
➮To switch the display between the
track number and time or the track
number and elapsed playing time,
press /DIS 7for longer than
two seconds once or repeatedly as
required.
CD changer operation
Note:
For information on how to handle CDs,
how to insert CDs into the changer and
how to operate the changer, please re-
fer to the instructions included with the
CD changer.
Starting CD changer operation
➮Press CD•C @repeatedly until
“CHANGER” appears in the dis-
play.
Playbackwill begin with the first CD the
changer detects in the magazine.
Selecting CDs
➮To select a CD up or down in the
magazine, press or :the re-
quired number of times.
Selecting tracks
➮To select a different track on the
CD currently playing, press or
:the required number of times.
Audible fast forward/reverse
(CUE/REVIEW)
To start Cue or Review,
➮press and hold down either or
:until the process begins.
Switching the display mode
➮To switch the display between the
track number and time or the track
number and elapsed playing time
or the CD number and track
number, press /DIS 7for long-
er than two seconds once or re-
peatedly as required.
CD PLAYER OPERATION CD CHANGER OPERATION

15
FRANÇAIS ENGLISH
ESPAÑOL
PORTUGUÊS
Repeating individual tracks or
entire CDs (REPEAT)
➮To repeat the track currently play-
ing, press 4 RPT >briefly.
“REPEAT TRCK” will appear briefly in
the display, RPT will light up in the dis-
play.
➮To repeat the entire CD currently
playing, press 4RPT >again.
“REPEATDISC”will appear briefly inthe
display, RPT will light up in the display.
Stopping the REPEAT function
➮To stop the REPEAT function for
the current track or CD, press 4
RPT >repeatedly until “REPEAT
OFF” appears in the display and
RPT no longer lights up.
Playing tracks in random order
(MIX)
➮To play the tracks of the currently
selected CD in random order,
press 5 MIX >briefly.
“MIX CD” will appear briefly in the dis-
play, MIX will light up in the display.
➮To play the tracks of all of the CDs
in random order, press 5 MIX >
again.
“MIX ALL” will appear briefly in the dis-
play, MIX will light up in the display.
Note:
The CDC A 08 and the IDC A 09 are
also able to play all of the CDs in the
changerin randomorder.Theother CD
changers first play all of the tracks on a
CDinrandomorderandthenselectthe
next CD in the changer.
Stopping the MIX function
➮To stop the MIX function, press 5
MIX >repeatedly until “MIX OFF”
appears briefly in the display and
MIX no longer lights up.
Scanning all of the tracks on all
of the CDs (SCAN)
➮To scan all of the tracks on all of
the CDs in ascending order, press
OK ;for longer than two sec-
onds.
“SCAN” will appear in the display.
Stopping the SCAN function
➮To stop the SCAN function, press
OK ;briefly.
The track currently scanned will contin-
ue playing.
Note:
It is possible to adjust the scan time.
For more information, read the section
on“Adjustingthescantime”inthechap-
ter on “Radio Operation”.
Interrupting playback (PAUSE)
➮Press 3>.
“PAUSE” will appear in the display.
Stopping PAUSE
➮Press 3>during the pause.
Playback will resume.
CD CHANGER OPERATION

16
CLOCK
Displaying the clock briefly
➮To display the time briefly, press
/DIS 7briefly.
Setting the time
➮To set the time, press MENU 8.
“MENU” will appear in the display.
➮Press :until “CLOCKSET” ap-
pears in the display.
➮Press :.
The time will appear in the display.The
minutes will flash and can be altered.
➮Press or :to alter the min-
utes.
➮Once you have altered the min-
utes, press :.The hours will
begin to flash.
➮Press or :to alter the
hours.
➮Once you have set the time, press
MENU 8or OK ;twice.
Selecting the 12/24-hour time
display mode
➮Press MENU 8.
“MENU” will appear in the display.
➮Press :repeatedly until “24 H
MODE” or “12 H MODE” appears
in the display.
➮Press or :to switch the dis-
play mode.
➮Once you have selected the mode,
press MENU 8or OK ;.
Activating the clock for display
when the car audio system is
switched off
➮To activate the clock for display
when the car audio system is
switched off, press MENU 8.
“MENU” will appear in the display.
➮Press :repeatedly until “CLK
DISP OFF” or “CLK DISP ON” ap-
pears in the display.
➮Press or :to switch the
clock display on or off.
➮Once you have made the setting,
press MENU 8or OK ;.
Displaying the time briefly when
the car radio is switched off
To display the time briefly when the car
radio is switched off,
➮press /DIS 7.
The time will then appear in the display
for eight seconds.
CLOCK

17
FRANÇAIS ENGLISH
ESPAÑOL
PORTUGUÊS
Adjusting the tone and
balance/fader
Ad usting the bass
➮To adjust the bass, press AUD /
LD =.
“BASS” will appear in the display.
➮Press or :to alter the bass.
Ad usting the treble
➮To adjust the treble, press AUD /
LD =.
“BASS” will appear in the display.
➮Press :until “TREBLE” ap-
pears in the display.
➮Press or :to alter the treble.
Ad usting the balance
➮To adjust the balance, press AUD /
LD =.
“BASS” will appear in the display.
➮Press :until “BALANCE” ap-
pears in the display.
➮Press or :to alter the bal-
ance.
Ad usting the fader
➮To adjust the fader, press AUD /
LD =.
“BASS” will appear in the display.
➮Press :until “FADER” appears
in the display.
➮Press or :to alter the fader.
Switching Loudness on/off
Loudness boosts the bass and treble
whenthevolumeislowtocreateamore
natural sound.
➮Press AUD /LD =for approx.two
seconds.
LD will light up in the display to indicate
that Loudness is active.
Ad usting Loudness intensity
The Loudness boost can be set in
stages from one to six.
➮Press MENU 8.
“MENU” will appear in the display.
➮Press :repeatedly until
“LOUDNESS” appears in the dis-
play.
➮Press or :to alter the Loud-
ness setting.
➮Once you have completed adjust-
ing the settings, press MENU 8or
OK ;.
TONE AND BALANCE/FADER

18
BASS CENTER frequency
adjustment
The bass center frequency adjustment
allows you to adjust the bass mid-fre-
quencytosuitthesoundsysteminyour
automobile (50 Hz or 100 Hz).
➮To set the bass mid-frequency,
press EQ <.
“BASSCENTER”willappearinthedis-
play.
➮Press or :to switch be-
tween “50 Hz” and “100 Hz”.
➮Once you have completed adjust-
ing the settings, press EQ <or
OK ;.
Ad usting the spectrometer
The spectrometer in the display uses
symbols to temporarily indicate what
adjustments are made to the volume,
the tone and balance/fader and the
equalizer settings.
Ifnoadjustmentsarebeingmadetothe
system, the spectrometer displays the
output level of the car radio.
You can select the type of spectrome-
ter you want displayed in the menu.
There are two different types available.
Selecting the spectrometer type
➮Press MENU 8.
“MENU” will appear in the display.
➮Press :repeatedly until “EQ
DISPLAY” appears in the display.
➮Press or :to select either
“SPECTRUM 1”, “SPECTRUM 2”
or “EQ DISP OFF”.
➮Once you have completed adjust-
ing the settings, press MENU 8or
OK ;.
BASS CENTER

19
FRANÇAIS ENGLISH
ESPAÑOL
PORTUGUÊS
EXTERNAL AUDIO SOURCES SPECIFICATIONS
External audio sources
In place of the CD changer it is also
possible to connect other external au-
dio sources to the line output. These
sourcescanincludeaportableCDplay-
er, MiniDisc player or MP3 player.
YoumustactivatetheAUXoutput inthe
menu.
If you would like to connect another ex-
ternal audio source, you will require an
adapter cable. This adapter cable can
be ordered from any authorized Blau-
punkt dealer.
Switching the AUX output on/off
➮Press MENU 8.
“MENU” will appear in the display.
➮Press :repeatedly until “AUX-
IN-1 OFF” or “AUX-IN-1 ON” ap-
pears in the display.
➮Press or :to switch AUX on
or off.
➮Once you have completed your se-
lections, press MENU 8or OK
;.
Note:
IftheAUXinputhasbeenswitchedON,
you can select it by pressing CD•C @.
Specifications
Amplifier
Output power: 4 x 25 watts sinus
acc. to DIN 45 324
at 14.4 V
4 x 40 watts max.
power
Tuner
Wavebands:
FM : 87.5 – 107.9 MHz
AM : 530 – 1710 kHz
FM frequency response:
30 - 15000 Hz
CD
Frequency response:
20 - 20000 Hz
Preamp Out
4 channels: 4 V
Subject to technical modification!

Ser ice numbers / Numéros du ser ice après- ente /
Números de ser icio / Número de ser iço
Tel.: Fax:
Deutschland 0 18 05 00 02 25 0 51 21 49 40 02
Belgique / België 0 25 25 54 44 0 25 25 54 48
France 014 010 70 07 014 010 73 20
Nederland 023 565 63 48 023 565 63 31
Great Britain 018 958 383 66 018 958 383 94
Danmark 44 89 83 60 44 89 86 44
Sverige 08 750 15 00 08 750 18 10
Norge 66 81 70 00 66 81 71 57
Suomi 094 359 91 094 359 92 36
Österreich 01-6 10 39-0 01-6 10 39-391
EÏÏ¿˜ 015 762 241 015 769 473
âeská republika 026 130 04 41 026 130 05 14
USA 800-266 25 28 708-681 71 88
Singapore 006 535 054 47 006 535 053 12
Slovensko 042 175 873 212 042 175 873 229
02/00 TRO K7/VKD 8 622 402 211
Blaupunkt-Werke GmbH
Bosch Gruppe

Radio / CD
Honolulu CD50
Installation instructions
Notice de montage
Instrucciones de instalación
Instruções de montagem