Blaupunkt Buenos Aires 200 User manual

Radio CD MP3 WMA
Buenos Aires 200 7 649 027 110
www.blaupunkt.com
Operating and installation instructions
Mode d’emploi et de montage
Instrucciones de manejo e instalación
Instruções de serviço e de montagem
01_BuenosAires200_us_gb.indd 101_BuenosAires200_us_gb.indd 1 14.11.2008 13:24:39 Uhr14.11.2008 13:24:39 Uhr

2
1button
Unlock the detachable control panel
2button
In the menu: Change settings
Radio mode: Adjust the stations
CD/MP3/WMA mode: Track selection
3button
In the menu: Change settings
Radio mode: Adjust the stations
CD/MP3/WMA mode: Track selection
4On/Off button
Short press: Switch on switched off device,
select audio source/"NO SRC" mode
Long press: Switches the device off
Turn: Adjust volume, change settings in Audio
menu
5CD tray
6Display
7button (Eject)
Eject a CD
8Front AUX-IN socket
9AUD button
Call up the Audio menu
:Reset button
Reset the device to the factory settings
;Keys 1 - 6
<DISP button
Short press: Switch display
Long press: Display text as scrolling text
=AM button
In the menu: Call up menu item
Radio mode: Select AM waveband
MP3/WMA mode: Change to previous folder
>FM button
In the menu: Call up menu item
Radio mode: Select FM waveband, change
between FM memory banks
MP3/WMA mode: Change to next folder
?MENU button
Long press: Call up user menu
Short press: Exit menus
12 345
?
678
><;:9
=
Controls
01_BuenosAires200_us_gb.indd 201_BuenosAires200_us_gb.indd 2 14.11.2008 13:24:39 Uhr14.11.2008 13:24:39 Uhr

3
ENGLISH
Contents
Important information ................................4
About these instructions ...........................4
For your safety.........................................4
Cleaning instructions ................................5
Disposal of old unit...................................5
Scope of delivery .....................................5
Optional equipment
(not part of the scope of delivery)...............5
Warranty.................................................5
Placing the device in operation....................6
Detaching/attaching the control panel.........6
Switching on/off ......................................6
Adjusting the volume ................................6
"NO SRC" mode (muted) ...........................6
Preamplifier output ..................................7
Radio mode................................................7
Changing to radio mode ............................7
Selecting the memory bank
(FM1, FM2, FM3, AM) ..............................7
Tuning into a station..................................7
Storing stations/calling stored stations: .......8
Storing stations automatically (Travelstore) ... 8
Configuring the display..............................8
CD/MP3/WMA mode...................................8
Basic information .....................................8
Changing to CD/MP3/WMA mode ...............9
Inserting a CD..........................................9
Ejecting a CD ...........................................9
Selecting tracks .......................................9
Selecting a folder (in MP3/WMA mode only)....9
Direct track search ...................................9
Fast searching..........................................9
Interrupting playback................................9
Scanning all tracks..................................10
Playing tracks in random order .................10
Repeatedly playing individual tracks
or directories.........................................10
Configuring the display............................10
Sound settings .........................................11
Calling and exiting the audio menu............11
Performing settings in the audio menu.......11
Adjusting the level for an audio source.......11
Adjusting the low-pass filter for the
subwoofer.............................................12
Adjusting the loudspeaker type ................12
User settings............................................12
Calling and exiting the user menu..............12
Performing settings in the user menu ........12
Setting the time .....................................14
Additional functions .................................14
External audio sources ............................14
Restoring factory settings........................14
Remote control.........................................15
Functions of the handheld remote control ...15
Inserting the batteries.............................15
Technical data ..........................................16
Installation instructions ............................62
01_BuenosAires200_us_gb.indd 301_BuenosAires200_us_gb.indd 3 14.11.2008 13:24:40 Uhr14.11.2008 13:24:40 Uhr

4
Important information
Important information
About these instructions
These instructions contain important informa-
tion to easily and safely install and operate the
device.
Read these instructions carefully and com-
pletely before using the device.
Keep the instructions at a location so that they
are always accessible to all users.
Always pass on the device to third parties
together with these instructions.
In addition, observe the instructions of the devic-
es used in conjunction with this device.
Symbols used
These instructions employ the following symbols:
CAUTION!
Warns about laser beam
CAUTION!
Warns about damaging the CD drive
The CE mark confirms the compliance
with EU directives.
Identifies a sequencing step
Identifies a listing
Use as directed
This device is intended for installation and opera-
tion in a vehicle with 12 V vehicle system voltage
and must be installed in a DIN slot. Observe the
performance limits in the technical data. Repairs
and installation, if necessary, should be per-
formed by a specialist.
•
•
•
쏅
•
Declaration of conformity
The Blaupunkt GmbH declares that the Buenos
Aires 200 device complies with the basic require-
ments and the other relevant regulations of the
directive 89/336/EWG.
For your safety
The device was manufactured according to the
state of the art and established safety guidelines.
Even so, dangers may occur if you do not observe
the safety notes in these instructions.
If you are installing device yourself
You may only install the device yourself if you are
experienced in installing car sound systems and
are very familiar with the electrical system of the
vehicle. For this purpose, observe the installation
instructions at the end of these instructions.
Observe the following!
CAUTION!
The device contains a Class 1 laser
that can cause injuries to your eyes.
Do not open the device and do not perform any
modifications.
In operation:
Operate the device only if traffic situation per-
mits it! Stop at a suitable location to perform
more extensive operations.
Remove or attach the control panel only while
the vehicle is standing an.
Always listen at a moderate volume to protect
your hearing and to be able to hear acoustic
warning signals (e.g. police sirens). During
mute phases (e.g. when changing the audio
source), changing the volume is not audible.
Do not increase the volume during this mute
phase.
•
•
•
01_BuenosAires200_us_gb.indd 401_BuenosAires200_us_gb.indd 4 14.11.2008 13:24:40 Uhr14.11.2008 13:24:40 Uhr

5
ENGLISH
Important information
After operation:
The device is worthless to a thief without the
control panel. Always remove the control panel
whenever you leave the vehicle.
Transport the control panel so that it is pro-
tected against impacts and the contacts can-
not become dirty.
Cleaning instructions
Solvents, cleaning and scouring agents as well as
dashboard spray and plastics care product may
contain ingredients that will damage the surface
of the device.
Use only a dry or slightly moistened cloth for
cleaning the device.
If necessary, clean the contacts of the control
panel regularly using a soft cloth moistened with
cleaning alcohol.
Disposal of old unit
Do not dispose of your old unit in the house-
hold trash!
Use the return and collection systems avail-
able to dispose of the old device.
Do not discard depleted batteries of the re-
mote control in the household trash, but
return it to the corresponding collection
centres.
Scope of delivery
The scope of delivery includes:
1 Car sound system
1 Handheld remote control
1 Operating instructions
1 Cloth case for the control panel
1 Support frame
1 Set of small parts
2 Disassembly tools
1 Connector cable
•
•
Optional equipment
(not part of the scope of delivery)
Use only optional equipment approved by Blau-
punkt, such as:
Blaupunkt or Velocity amplifier
Information is available from your Blaupunkt spe-
cialised dealer or on the Internet under www.blau-
punkt.com.
Warranty
We provide a manufacturer's warranty for prod-
ucts bought within the European Union. Devices
purchased outside the European Union are sub-
ject to the warranty terms published by our re-
spective regional agency.
Service
In some countries, Blaupunkt offers a repair and
pick-up service.
Information about the availability of this service in
your country can be found at www.blaupunkt.com.
If you want to take advantage of this service, you
may request a pick-up service for your device via
the Internet.
•
01_BuenosAires200_us_gb.indd 501_BuenosAires200_us_gb.indd 5 14.11.2008 13:24:40 Uhr14.11.2008 13:24:40 Uhr

6
Placing the device in operation
Placing the device in operation
Detaching/attaching the control
panel
The device is equipped with a detachable control
panel (flip-release panel) as a way of protecting
your equipment against theft. Always take the
control panel with you when leaving the vehicle.
The device is worthless to a thief without this con-
trol panel.
Caution
Damage to the control panel
Never drop the control panel.
Do not expose the control panel to direct sunlight
or another heat source.
Avoid direct skin contact with the control panel’s
electrical contacts.
Removing the control panel
Press the button 1to unlock the control
panel.
Grasp the control panel at the left side and
first pull it straight out of the bracket and
then to the left.
Attaching the control panel
Push the control panel into the bracket at the
right edge of the device.
Push the control panel carefully into the left
bracket until it clicks into place.
Switching on/off
With the vehicle ignition switched on, briefly
press the On/Off button 4to switch on the
device.
- or -
Press the On/Off button 4for approx.
2 seconds to switch off the device.
The device remembers the audio source played
last for the next switch-on. Any CD already insert-
ed in the device remains there.
쏅
쏅
쏅
쏅
쏅
쏅
Notes:
If the vehicle ignition is switched off, the
device cannot be switched on with the
On/Off button 4.
The device is switched off and on again
with the vehicle ignition if it is connected
with the ignition (see the installation in-
structions).
Adjusting the volume
You can adjust the volume in increments from
0 (off) to 66 (maximum).
Turn the On/Off button 4to change the
volume.
Note:
If a telephone or navigation system is con-
nected with the device as described in the
installation instructions, the device is muted
with every telephone call or a navigation
announcement. The display then shows
"PHONE".
"NO SRC" mode (muted)
Instead of an audio source, you can select the
"NO SRC" mode ("No Source": no audio source).
In "NO SRC" mode, no audio source is selected
and the device is muted.
Certain user settings can be performed only in the
"NO SRC" mode.
Changing to "NO SRC" mode
Press the On/Off button 4repeatedly until
"NO SRC" appears.
•
•
쏅
쏅
01_BuenosAires200_us_gb.indd 601_BuenosAires200_us_gb.indd 6 14.11.2008 13:24:40 Uhr14.11.2008 13:24:40 Uhr

7
ENGLISH
Placing the device in operation Radio mode
Preamplifier output
This device features a preamplifier output.
Settings for the preamplifier output:
Chapter "User settings", section "Perform-
ing settings in the user menu", menu item
"SWPRE"
Chapter "Sound settings", section "Adjusting
the low-pass filter for the subwoofer".
•
•
Radio mode
Changing to radio mode
Press the On/Off button 4repeatedly until
"FM"/"AM" appears.
Selecting the memory bank
(FM1, FM2, FM3, AM)
Press the FM button >repeatedly until
the desired FM memory bank (FM1, FM2,
FM3) appears.
- or -
Press the AM button =to select the AM
memory bank.
Note:
Up to six stations can be stored in each mem-
ory bank.
Tuning into a station
The buttons 2/ 3allows tuning into sta-
tions manually or by using automatic seek tuning
or changing between stored stations. First, ad-
just the desired function in the user menu (see
the chapter "User settings", section "Performing
settings in the user menu", menu item "AUTO1 /
AUTO2 / MANUAL").
Starting station seek tuning
(setting "AUTO1")
Press the button 2/ 3briefly to tune
into the next receivable station.
Adjusting stations manually
(setting "MANUAL")
Press the button 2/ 3briefly once
or several times to change the frequency in
increments.
Press and hold down the button 2/ 3
to quickly change the frequency.
쏅
쏅
쏅
쏅
쏅
쏅
01_BuenosAires200_us_gb.indd 701_BuenosAires200_us_gb.indd 7 14.11.2008 13:24:40 Uhr14.11.2008 13:24:40 Uhr

8
Radio mode CD/MP3/WMA mode
Changing between stored stations
(setting "AUTO2")
Press the button 2/ 3briefly to tune
to the station at the next memory location.
Storing stations/calling stored
stations:
Select the desired memory bank.
If necessary, set the desired station.
Press the station button 1 - 6 ;for approx.
2 seconds to store the current station under
the button.
- or -
Briefly press the station button 1 - 6 ;to
call up the stored station.
Storing stations automatically
(Travelstore)
Travelstore allows storing 6 stations each of the
region for the current memory bank on the station
buttons 1-6;. Any previously stored stations
in this memory bank are deleted in the process. In
FM mode, you can store additional stations after
changing to another memory bank if you start the
automatic station store again.
Press the FM button >for approx.
2 seconds to start the Travelstore function
("A-MEMORY").
Configuring the display
Press the DISPbutton <to change between
these displays:
Display Meaning
FREQ Frequency
CLOCK Time
쏅
쏅
쏅
쏅
쏅
쏅
쏅
CD/MP3/WMA mode
Basic information
This car sound system can be used to play audio
CDs (CDDA) as well as CD-R/RWs with audio,
MP3 or WMA files.
Risk of damage to the CD drive!
Noncircular contoured CDs (shape CDs)
and CDs with a diameter of 8 cm (mini
CDs) must not be used.
We accept no responsibility for any damage to the
CD drive that may occur as a result of the use of
unsuitable CDs.
Notes:
To ensure proper functioning, use only CDs
with the Compact-Disc logo.
Blaupunkt cannot guarantee the flawless
function of copy-protected CDs and all CD
blanks available on the market.
Note the following information when preparing an
MP3/WMA CD:
Naming of tracks and directories:
Max. 16 characters incl. the file extension
".mp3" or ".wma" (the use of more char-
acters reduces the number of tracks and
folders that the device can recognise)
No umlauts or special characters
CD formats: Audio CD (CDDA), CD-R/RW,
Ø: 12 cm
CD data formats: ISO 9669 Level 1 and 2, Jo-
liet
CD burn speed: Max. 16x (recommended)
File extension of audio files:
.MP3 for MP3 files
.WMA for WMA files
WMA files only without Digital Rights Manage-
ment (DRM) and created with Windows Media
Player version 8 or later
MP3 ID3 tags: Version 1 and 2
•
•
•
–
–
•
•
•
•
–
–
•
•
01_BuenosAires200_us_gb.indd 801_BuenosAires200_us_gb.indd 8 14.11.2008 13:24:40 Uhr14.11.2008 13:24:40 Uhr

9
ENGLISH
CD/MP3/WMA mode
Bitrate for creating audio files:
MP3: 32 to 320 kbps
WMA: 32 to 192 kbps
Max. number of tracks and folders: 999 tracks,
99 folders
Changing to CD/MP3/WMA mode
Press the On/Off button 4repeatedly until
"CD" appears.
Note:
The CD/MP3/WMA mode can be selected
only if a corresponding CD is inserted.
Inserting a CD
Note:
You must not hinder or assist the drive as it
automatically draws in the CD.
Push the CD into the CD tray 5until you feel
a resistance.
The CD is automatically drawn in and play-
back starts. If a CD is inserted, the display
shows the CD symbol.
Ejecting a CD
Notes:
If a CD is ejected and not removed, the
drive will automatically draw it back in
again after approx. 10 seconds.
You can also eject CDs whilst the device is
switched off or whilst another audio source
is activated.
Press the button 7to eject an inserted
CD.
Selecting tracks
Briefly press the button 2/ 3to
change to the previous/next track.
Note:
Pressing 2once starts the current track
again.
•
–
–
•
쏅
쏅
•
•
쏅
쏅
Selecting a folder
(in MP3/WMA mode only)
Press the button AM =/ FM >to
change to the previous/next folder.
Direct track search
You can also select a track directly without inter-
rupting the current playback.
Briefly press the MENU button ?. "FLD
SEL" briefly appears on the display.
In MP3/WMA mode, press the button 2
to change from the current to the next higher-
level folder.
Press the button AM =/ FM >once
or several times or turn the On/Off button 4
to select a track or, in MP3/WMA mode, a sub-
folder in the current folder.
Press the AUD button 9to start the select-
ed track or open the subfolder.
Note:
Pressing the MENU button ?cancels the di-
rect selection without starting a new track.
Fast searching
Press and hold down the button 2/ 3
until the desired position has been reached.
Interrupting playback
Press the 6 button ;to interrupt the
playback ("PAUSE") or to continue it.
쏅
쏅
쏅
쏅
쏅
쏅
쏅
01_BuenosAires200_us_gb.indd 901_BuenosAires200_us_gb.indd 9 14.11.2008 13:24:41 Uhr14.11.2008 13:24:41 Uhr

10
CD/MP3/WMA mode
Scanning all tracks
The Scan function scans every track of the CD for
approx. 10 seconds.
Press the 2 SCAN button ;to start the scan
("SCN TRCK") or to continue listening to the
currently scanned track ("SCN OFF").
Playing tracks in random order
Press the 3 MIX button ;to activate the
MIX function (audio CD: "MIX CD"; MP3: "MIX
FLDR") or to switch it off ("MIX OFF").
If the MIX function is active, the MIX symbol
appears on the display.
Repeatedly playing individual tracks
or directories
Press the 4 RPT button ;once or twice to
change between playback modes:
Opera-
tion
Display Meaning
CD RPT TRCK Repeating tracks
MP3/
WMA
RPT FILE Repeating tracks
RPT FLDR Repeating folders
Gen. RPT OFF Regular playback
If the RPT function is active, the RPT symbol
appears on the display.
쏅
쏅
쏅
Configuring the display
Press the DISP button <once or several
times to change between these displays:
Opera-
tion
Display Meaning
CD
D-TITLE CD name
T-TITLE Track name
P-TIME Playing time/track
number
CLOCK Time
MP3/
WMA
TITLE Track name*
ALBUM Album name*
FOLDER Folder name
FILE File name
P-TIME Playing time/track
number
CLOCK Time
* Only if stored as ID3 tag
Press the DISP button <for approx.
2 seconds to show the displayed text once as
scrolling text.
쏅
쏅
01_BuenosAires200_us_gb.indd 1001_BuenosAires200_us_gb.indd 10 14.11.2008 13:24:41 Uhr14.11.2008 13:24:41 Uhr

11
ENGLISH
Sound settings
Sound settings
The settings in the audio menu and the adjust-
ment of the level each apply to the current audio
source.
Calling and exiting the audio menu
If necessary, press the On/Off button 4
repeatedly until the desired audio source is
selected.
Briefly press the AUD button 9to open the
audio menu.
Press the AUD button 9repeatedly until the
desired menu item is selected.
Perform the setting (see the next section).
Briefly press the MENU button ?to exit the
audio menu.
Performing settings in the audio
menu
SW L
Subwoofer level. Settings: -15 to +15.
Turn the On/Off button 4to perform the
setting.
X-BASS
Increase of bass at low volume. Settings: OFF, 1,
2 (highest increase).
Turn the On/Off button 4to change be-
tween the settings.
NATURAL / ROCK / POPS / EASY / TOP40 /
JAZZ / GAME / USER
Equaliser presettings: NATURAL, ROCK, POPS,
EASY, TOP40, JAZZ, GAME.
"USER" is not an equaliser presetting and appears
as a menu item only if you manually adjusted the
bass, treble or middle level the last time. As soon
as you select an equaliser presetting, your manu-
ally performed settings are replaced by the pre-
setting.
쏅
쏅
쏅
쏅
쏅
쏅
쏅
Turn the On/Off button 4to change be-
tween the settings.
BAS L
Bass level. Settings: -7 to +7.
Turn the On/Off button 4to perform the
setting.
MID L
Middle level. Settings: -7 to +7.
Turn the On/Off button 4to perform the
setting.
TRE L
Treble. Settings: -7 to +7.
Turn the On/Off button 4to perform the
setting.
BAL
Left/right volume distribution (balance). Set-
tings: L 9 (left) to R 9 (right).
Turn the On/Off button 4to perform the
setting.
FAD
Front/rear volume distribution (fader). Settings:
F 9 (front) to R 9 (rear).
Turn the On/Off button 4to perform the
setting.
Adjusting the level for an audio
source
You can separately adjust the level for any audio
source, e.g. to achieve a uniform playback level
for all audio sources. Settings: For AUX -8 to +8,
for all other audio sources -8 to 0.
If necessary, press the On/Off button 4
repeatedly until the desired audio source is
selected.
Press the AUD button 9for approx. 2 sec-
onds.
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
01_BuenosAires200_us_gb.indd 1101_BuenosAires200_us_gb.indd 11 14.11.2008 13:24:41 Uhr14.11.2008 13:24:41 Uhr

12
If necessary, briefly press the AUD button 9
to select the "V-OFF" menu item.
Turn the On/Off button 4to perform the
setting.
Briefly press the MENU button ?to exit the
menu.
Adjusting the low-pass filter for the
subwoofer
This is possible only if the setting SWPRE SW is se-
lected in the user menu. Settings: THRU (no low-
pass filter), 80H (Hz), 120H (Hz), 160H (Hz).
Press the AUD button 9for approx. 2 sec-
onds.
The "LPF" menu item is selected.
Turn the On/Off button 4to perform the
setting.
Briefly press the MENU button ?to exit the
menu.
Adjusting the loudspeaker type
Adjust the loudspeaker type connected to the
device to optimise the sound. Settings: SP OFF
(no type selected), SP 5/4 (loudspeaker with 4 or
5 inch diameter), SP 6*9/6 (loudspeaker with
6 or 6x9 inch diameter), SP OEM (original Blau-
punkt loudspeaker).
If necessary, press the On/Off button 4
repeatedly until "NO SRC" is selected.
Briefly press the AUD button 9.
Turn the On/Off button 4to change be-
tween the settings.
Briefly press the AUD button 9to exit the
menu.
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
User settings
Calling and exiting the user menu
Press the MENU button ?for approx. 2 sec-
onds to open the menu.
Press the button AM =/ FM >
repeatedly until the desired menu item is
selected.
Perform the setting (see the next section).
Briefly press the MENU button to exit the
menu.
Performing settings in the user menu
AUTO1 / AUTO2 / MANUAL
Possible only in radio mode: Select the mode for
setting stations. Settings: AUTO1 (station seek
tuning), AUTO2 (changing between stored sta-
tions), MANUAL (adjusting the frequency manu-
ally).
Press the button 2/ 3to change
between the settings.
CRSC
Possible only in FM radio mode: Switch automatic
mono playback for radio stations on or off in case
of poor reception. Settings: ON, OFF.
Press the button 2/ 3to change
between the settings.
SCL
Switching automatic display of text as scrolling
text on or off. Settings: AUTO (On), MANU (Off).
Press the button 2/ 3to change
between the settings.
DEMO
Switching demo mode on or off. Settings: ON,
OFF.
Press the AUD button 9for approx. 2 sec-
onds to change between the settings.
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
Sound settings User settings
01_BuenosAires200_us_gb.indd 1201_BuenosAires200_us_gb.indd 12 14.11.2008 13:24:41 Uhr14.11.2008 13:24:41 Uhr

13
ENGLISH
DIM
Switching automatic adjustment of display bright-
ness ti the ambient lighting on or off. Settings:
ON, OFF.
Press the button 2/ 3to change
between the settings.
SPRM
Only possible in MP3 and WMA mode: Switch-
ing the Supreme function on or off. Settings: ON,
OFF.
Press the button 2/ 3to change
between the settings.
The Supreme function results in a sound improve-
ment for tracks coded at a low bitrate. The low
bitrate results in capping the upper frequency
range during the coding. For playback, the Su-
preme function recalculates the upper frequency
range and subsequently expands the sound spec-
trum. For tracks with high or variable bitrate or
with little salient upper frequency range, the Su-
preme function allows only minor sound improve-
ment.
NAME SET
Possible only in AUX mode: Selecting names for
the AUX input. Settings: AUX, TV, VIDEO, GAME,
PORTABLE, DVD.
Press the AUD button 9for approx. 2 sec-
onds.
Press the button 2/ 3to change
between the settings.
Note:
The menu is automatically exited 10 seconds
after the last button press.
The AUX mode is selected under the defined
name.
쏅
쏅
쏅
쏅
SWPRE
Possible only if the "NO SRC" mode is selected:
Adjusting the preamplifier output. Settings: R
(for external amplifier), SW (for subwoofer).
Press the button 2/ 3to change
between the settings.
With the setting "R", the full frequency spectrum
is available at the preamplifier output. With the
setting "SW", you can adjust a low-pass filter for
a connected subwoofer (see the chapter "Sound
settings", section "Adjusting the low-pass filter for
the subwoofer").
AUX
Possible only if the "NO SRC" mode is selected:
Adjusting the AUX input. Settings: OFF (AUX
mode is not selectable), ON1 (AUX mode is se-
lectable), ON2 (AUX mode is selectable, volume
reduction on; see below).
Press the button 2/ 3to change
between the settings.
For the setting "ON2": If the device is switched off
in AUX mode, it is initially at low volume when it
is switched on again ("ATT ON", volume reduction
on). Turn the On/Off button 4clockwise by one
increment to reactivate the previously adjusted
volume ("ATT OFF", volume reduction off).
CD READ
Possible only if the "NO SRC" mode is selected:
Adjusting the CD playback. Settings: 1 (for audio
CDs and MP3/WMA CDs), 2 (for audio CDs only).
Press the button 2/ 3to change
between the settings.
With the setting "1", the device recognises audio
CDs as well as MP3/WMA CDs and plays them.
With this setting, copy-protected CDs can fre-
quently not be played. With the setting "2", the
device recognises only audio CDs and does not
play any MP3/WMA CDs. With this setting, many
copy-protected CDs can also be played.
쏅
쏅
쏅
User settings
01_BuenosAires200_us_gb.indd 1301_BuenosAires200_us_gb.indd 13 14.11.2008 13:24:41 Uhr14.11.2008 13:24:41 Uhr

14
User settings Additional functions
Setting the time
If necessary, press the DISP button <
repeatedly until the time is displayed.
Press the DISP button <for approx. 2 sec-
onds.
Press the button AM =/ FM >to
adjust the hours.
Press the button 2/ 3to adjust the
minutes.
Briefly press the DISP button <.
쏅
쏅
쏅
쏅
쏅
Additional functions
External audio sources
Connecting external audio sources
You can connect external audio sources, such as
portable CD players, MiniDisc players, MP3 play-
ers, via the FRONT-AUX-IN socket 8(AUX input)
and play them back in AUX mode via the loud-
speakers of the car sound system.
Changing to AUX mode
Press the On/Off button 4repeatedly until
"AUX" appears.
Notes:
You can switch off the AUX input if no other
external audio source is connected (see
the chapter "User settings", section "Per-
forming settings in the user menu", menu
item "AUX").
You can select a different name for the AUX
input than "AUX" (see the chapter "User
settings", section "Performing settings in
the user menu", menu item "NAME SET").
Restoring factory settings
Press the reset button :with a pointed ob-
ject (e.g. a pin or the tip of a ball-point pen).
Factory settings in the user menu:
DIM OFF MONO OFF
SWPRE R SCL OFF
SPRM ON AUX ON1
DEMO OFF CD READ 1
쏅
•
•
쏅
01_BuenosAires200_us_gb.indd 1401_BuenosAires200_us_gb.indd 14 14.11.2008 13:24:42 Uhr14.11.2008 13:24:42 Uhr

15
ENGLISH
Remote control
Remote control
The most frequently used functions can also be
controlled via the handheld remote control.
Note:
Switching the device on and off is not possi-
ble with the remote control.
D
C
B
A
@
E
F
G
H
I
J
K
Functions of the handheld remote
control
General
C/ DAdjust volume
SRC ESelect audio source
ATT FMute device
In the Audio menu
AUD BSelect menu item
C/ DPerform a setting
In radio mode
FM+/AM–ASelect memory bank
/ ATune into a station
1 - 6 ICall up stored station
In CD/MP3/WMA mode
FM+/AM–ASelect folder (MP3/WMA only)
/ ASelect a track
GInterrupt/continue playback
Note:
The buttons @, Hand Jare without func-
tion for this device.
Inserting the batteries
The battery compartment is located at the back of
the remote control.
Press the cover of the battery compart-
ment Kslightly inward and push it down to
remove it.
Insert two batteries size AA into the battery
compartment. Make sure that the battery
poles are positioned as shown in the battery
compartment.
To close the battery compartment, place the
cover on the lateral guides of the battery com-
partment and push it up until it engages.
쏅
쏅
쏅
01_BuenosAires200_us_gb.indd 1501_BuenosAires200_us_gb.indd 15 14.11.2008 13:24:42 Uhr14.11.2008 13:24:42 Uhr

16
Technical data
Amplifier
Output power: 4 x 30 watts sine in
accordance with
DIN 45324 at 14.4 V
at 4 ohms.
4 x 50 watts max.
power
Tuner
Wavebands:
FM: 87.9 - 107.9 MHz
AM: 530 - 1,700 kHz
FM frequency response:
30 - 15,000 Hz
CD
Frequency response:
20 - 20,000 Hz
Pre-amp out
2 channels: 2 V
Input sensitivity
AUX input: 1.2 V / 10 kΩ
Dimensions and weight
W x H x D (mm): 182 x 53 x 155
Weight: approx. 1.30 kg
Subject to changes
Technical data
01_BuenosAires200_us_gb.indd 1601_BuenosAires200_us_gb.indd 16 14.11.2008 13:24:42 Uhr14.11.2008 13:24:42 Uhr

17
FRANÇAIS
1Touche
Déverrouillage de la face avant détachable
2Touche
Dans le menu : modification des réglages
Mode radio : réglage des stations
Mode CD/MP3/WMA : sélection du titre
3Touche
Dans le menu : modification des réglages
Mode radio : réglage des stations
Mode CD/MP3/WMA : sélection du titre
4Touche marche/arrêt
Pression brève : mise en marche de l’appareil
arrêté, sélection de la source audio/mode
« NO SRC »
Pression prolongée : arrêt de l’appareil
Rotation : réglage du volume sonore, modifi-
cation des réglages dans le menu audio
5Fente d’insertion du CD
6Ecran
7Touche (Eject)
Ejection du CD
8Prise AUX-IN frontale
9Touche AUD
Ouverture du menu audio
:Touche Reset
Retour au réglages d’usine de l’appareil
;Bloc de touches 1 - 6
<Touche DISP
Pression brève : commutation de l’affichage
Pression prolongée : défilement du texte sur
l’écran
=Touche AM
Dans le menu : ouverture de l’option de menu
Mode radio : sélection de la gamme d’ondes
AM
Mode MP3/WMA : sélection du dossier pré-
cédent
>Touche FM
Dans le menu : ouverture de l’option de menu
Mode radio : sélection de la gamme d’ondes
FM, commutation entre les niveaux de mé-
moire FM
Mode MP3/WMA : sélection du dossier sui-
vant
?Touche MENU
Pression prolongée : ouverture du menu uti-
lisateur
Pression brève : sortie des menus
12 345
?
678
><;:9
=
Eléments de commande
02_BuenosAires200_us_fr.indd 1702_BuenosAires200_us_fr.indd 17 14.11.2008 13:25:42 Uhr14.11.2008 13:25:42 Uhr

18
Sommaire
Informations importantes .........................19
A propos de cette notice..........................19
Pour votre sécurité .................................19
Instructions de nettoyage ........................20
Elimination des anciens appareils .............20
Composition de la fourniture....................20
Accessoires spéciaux(non fournis)............20
Garantie................................................20
Mise en service.........................................21
Retrait et mise en place de la face avant.....21
Mise en marche et arrêt...........................21
Réglage du volume..................................21
Mode « NO SRC » (son coupé) ..................21
Sortie du préamplificateur.......................22
Mode radio...............................................22
Passage dans le mode radio.....................22
Sélection du niveau de mémoire
(FM1, FM2, FM3, AM) ............................22
Sélection des stations.............................22
Mémorisation des stations/appel
des stations mémorisées.........................23
Mémorisation automatique de stations
(Travelstore)..........................................23
Régler du mode d’affichage......................23
Mode CD/MP3/WMA.................................23
Informations de base ..............................23
Sélection du mode CD/MP3/WMA ............24
Introduction d’un CD...............................24
Retrait du CD.........................................24
Sélection des titres.................................24
Sélection d’un dossier
(uniquement dans le mode MP3/WMA) .....24
Sélection directe des titres ......................24
Recherche rapide ...................................24
Arrêt de la lecture...................................24
Balayage de tous les titres........................25
Lecture des titres dans un ordre aléatoire....25
Répétition de la lecture d’un titre ou d’un
répertoire .............................................25
Régler du mode d’affichage......................25
Réglages de tonalité .................................26
Ouverture et fermeture du menu audio ......26
Réglages dans le menu audio....................26
Adaptation du niveau d’une source audio ...26
Réglage du filtre passe-bas pour le
subwoofer.............................................27
Réglage du type de haut-parleur ...............27
Réglages utilisateur..................................27
Ouverture et fermeture du menu
utilisateur..............................................27
Réglages dans le menu utilisateur .............27
Réglage de l’heure ..................................29
Autres fonctions.......................................29
Sources audio externes ...........................29
Retour aux réglages d’usine......................29
Télécommande.........................................30
Fonctions de la télécommande portable ....30
Insertion des piles ..................................30
Caractéristiques techniques......................31
Notice de montage....................................62
02_BuenosAires200_us_fr.indd 1802_BuenosAires200_us_fr.indd 18 14.11.2008 13:25:43 Uhr14.11.2008 13:25:43 Uhr

19
FRANÇAIS
Informations importantes
Informations importantes
A propos de cette notice
Cette notice contient des informations importan-
tes pour un montage et une utilisation simples et
sûrs de l’appareil.
Lisez cette notice avec soin et intégralement
avant d’utiliser l’appareil.
Conservez cette notice de façon à ce qu’elle
soit accessible à tout moment à tous les utili-
sateurs.
Remettez toujours l’appareil à un tiers avec
cette notice.
Tenez également compte des notices jointes aux
appareils utilisés conjointement à celui-ci.
Symboles utilisés
Les symboles suivants sont utilisés dans cette
notice :
ATTENTION !
Avertit de la présence d’un rayon laser
ATTENTION !
Avertit de la possibilité d’endommager
le lecteur de CD
Le sigle CE confirme que les directives
UE sont respectées.
Identifie une action
Identifie une énumération
Utilisation conforme
Cet appareil est prévu pour le montage et le fonc-
tionnement dans un véhicule disposant d’une ten-
sion de bord de 12 V et il doit être monté dans une
baie DIN. Tenez compte des limites de puissance
indiquées dans les caractéristiques techniques.
Confiez les réparations, et éventuellement le
montage, à un spécialiste.
•
•
•
쏅
•
Déclaration de conformité
Blaupunkt GmbH certifie que l’appareil Buenos
Aires 200 satisfait aux exigences de base et aux
exigences des autres dispositions applicables de
la directive 89/336/CEE.
Pour votre sécurité
L’appareil a été fabriqué en fonction de l’état actuel
des connaissances techniques et selon les règles
techniques de sécurité reconnues. Vous prenez ce-
pendant des risques si vous ne suivez pas les consi-
gnes de sécurité qui se trouvent dans cette notice.
Si vous montez vous-mêmes l’appareil
Vous n’êtes autorisé à monter l’appareil que si
vous possédez une expérience dans le montage
d’autoradios et disposez de bonnes connaissan-
ces en électricité automobile. Tenez compte pour
cela de la notice de montage qui se trouve à la fin
de ce document.
Ce que vous devez respecter !
ATTENTION !
L’appareil comporte un laser de
classe 1 qui est susceptible de
blesser vos yeux.
N’ouvrez pas l’appareil, n’entreprenez aucune
modification sur celui-ci.
En fonctionnement :
Ne manipulez l’appareil que si les conditions de
circulation le permettent ! Pour effectuer des
manipulations importantes, arrêtez-vous dans
un endroit approprié.
Enlevez ou remettez en place la face avant uni-
quement lorsque le véhicule est à l’arrêt.
Réglez un volume sonore modéré de manière
à protéger votre ouïe et à pouvoir entendre les
signaux d’alerte (par ex. de la police). Si vous
modifiez le volume sonore pendant une coupu-
re momentanée du son (par ex. lors d’un chan-
gement de source audio), la différence ne sera
audible qu’une fois le son rétabli. N’augmen-
tez pas le volume sonore pendant la coupure
momentanée du son.
•
•
•
02_BuenosAires200_us_fr.indd 1902_BuenosAires200_us_fr.indd 19 14.11.2008 13:25:43 Uhr14.11.2008 13:25:43 Uhr

20
Informations importantes
Après utilisation :
Sans face avant, l’appareil n’a aucune valeur
pour le voleur. Retirez toujours la face avant
lorsque vous quittez le véhicule.
Transportez la face avant de manière à ce qu’el-
le soit protégée des coups et que les contacts
ne puissent pas être encrassés.
Instructions de nettoyage
Les solvants, les produits de nettoyage, les abra-
sifs et les produits pour l’entretien du poste de
conduite et du plastique contiennent des subs-
tances susceptibles d’attaquer les surfaces de
l’appareil.
Pour nettoyer l’appareil, utilisez uniquement un
chiffon sec ou légèrement humide.
Nettoyez au besoin les contacts de la face avant
avec un chiffon doux imbibé d’alcool de nettoya-
ge.
Elimination des anciens appareils
Ne jetez pas votre ancien appareil avec les
ordures ménagères !
Utilisez les systèmes de retour ou de col-
lecte des anciens appareils en vue de leur élimi-
nation.
Ne jetez pas les piles usées dans les ordures
ménagères, mais déposez-les dans un cen-
tre de récupération approprié.
Composition de la fourniture
La fourniture comprend :
1 Autoradio
1 Télécommande portable
1 Notice d’utilisation
1 Etui en tissu pour la face avant
1 Cadre support
1 Petit matériel
2 Outils de démontage
1 Câble de raccordement
•
•
Accessoires spéciaux
(non fournis)
Utilisez uniquement les accessoires spéciaux
agréés par Blaupunkt, par exemple :
Les amplificateurs Blaupunkt et Velocity (Am-
plifier)
Renseignez-vous auprès de votre revendeur
Blaupunkt ou sur Internet à l’adresse www.blau-
punkt.com.
Garantie
Notre garantie constructeur s’étend à tous nos
produits achetés au sein de l’Union Européenne.
Pour les appareils vendus hors Union européen-
ne, ce sont les conditions de garantie définies par
nos représentations nationales compétentes res-
pectives, qui sont applicables.
Service
Dans certains pays, Blaupunkt propose un service
d’enlèvement et de réparation.
Vous pouvez contrôler si ce service est disponible
dans votre pays à l’adresse www.blaupunkt.com.
Si vous souhaitez recourir à ce service, vous pou-
vez effectuer une demande d’enlèvement de votre
appareil par Internet.
•
02_BuenosAires200_us_fr.indd 2002_BuenosAires200_us_fr.indd 20 14.11.2008 13:25:43 Uhr14.11.2008 13:25:43 Uhr