Blaupunkt TEV-501 User manual

VIDEO
Travel Entertainment
Video unit
TEV-501
Operating and installation instructions

2
Bitte aufklappen
Open here
Ouvrir s.v.p.
Aprite la pagina
Hier openslaan a.u.b.
Öppna här
Por favor, abrir
Favor abrir

33
ENGLISH DEUTSCHFRANÇAISITALIANO
NEDERLANDS
SVENSKAESPAÑOL
PORTUGUÊS
6789:;< =>
?@ABC
D
5
1
2
3
4

1313
ENGLISH DEUTSCHFRANÇAISITALIANO
NEDERLANDS
SVENSKAESPAÑOL
PORTUGUÊS
1Video input VIDEO IN
2Audio input, left channel
AUDIO IN L
3Audio input, right channel
AUDIO IN R
4Headphone output 1
HEADPHONE 1
5Headphone output 2
HEADPHONE 2
6On/off button POWER
7Volume control, quieter
VOLUME, picture controls
8Sequence switch for setting
contrast, brightness, colour and
tint PICTURE
9Volume control, louder
VOLUME, picture controls
:Infrared receiver for remote
control, optional SENSOR
;Stop button, eject cassette from
the unit STOP/EJECT
<Fast rewind button REWIND
=Playback button PLAY
>Fast forward button FFWD
?Input for 12-volt direct current
DC 12V
@Video input VIDEO IN
AAudio input, left channel
AUDIO IN L
BAudio input, right channel
AUDIO IN R
COutput for an external monitor
AV OUT
DInput for an optional television
receiver
CONTROLS

14
CONTENTS
Notes ...................................... 15
Securing and installing
the TEV-501 ............................ 16
Before using for the first time ......... 16
Securing the TEV-501
between the front seats ................. 17
Operating the TEV-501 in buildings . 18
Operating the TEV-501 ........... 18
Switching the TEV-501 on/off ........ 18
Playing a video cassette ................ 18
Inserting a video cassette ........... 18
Removing a video cassette ......... 18
Playing a video cassette ............. 18
Fast tape winding....................... 19
Connecting external sources
(games consoles, DVD players
and television receivers) ................ 19
Connecting a games console/
DVD player to the TEV-501 ........ 19
Connecting an external monitor .. 19
Connecting a television
receiver to the TEV-501 ................. 19
Headphone connection .................. 19
Adjusting the volume ..................... 20
Adjusting the picture ...................... 20
Adjusting the contrast ................ 20
Adjusting the brightness ............. 20
Adjusting the colour ................... 20
Adjusting the tint ........................ 20
Technical data ........................ 21

1515
ENGLISH DEUTSCHFRANÇAISITALIANO
NEDERLANDS
SVENSKAESPAÑOL
PORTUGUÊS
NOTES
To ensure that the TEV-501 is well
ventilated, only operate the unit with
the case opened.
Only use the supplied power supply
unit. Always disconnect the power
supply from the socket or cigarette
lighterfirst,beforedisconnectingthe
cable from the TEV-501.
Never touch the unit with moist
hands.
To clean the unit, only use a dry, lint-
freecloth.Neveruseharshcleansing
agents or thinners.
Dangerofelectricshock.Neveropen
theunit’shousing.Itdoesnotcontain
any components that can be
serviced by the user.
Removethe videocassette fromthe
unit when not in use.
Thank you for deciding to use a Blau-
punkt product. We wish you a lot of fun
with your new piece of equipment.
Before operating the TEV-501 (Travel
Entertainment Video) unit for the first
time, please read these operating
instructions carefully and keep them in
theTEV-501’scaseforfuturereference.
Please observe the following safety
instructions to ensure you operate the
TEV-501 safely and in a manner that
will not be of danger to anyone.
TheTEV-501mustbeconnected
to a switched power supply (e.g. the
cigarette lighter) and must not be
connected directly to the vehicle
battery. To avoid the battery running
flat,disconnecttheTEV-501fromthe
power supply when not in use.
The TEV-501 must always be
secured in its case using the Velcro
straps.Fasten theunit tothe eyelets
at the side.
Ensure that the unit is attached and
secured in accordance with these
operating instructions.
The S-hooks and all the straps must
be attached and fastened correctly
toavoid the unitcausing injury inthe
event of an accident.

16
Securing and installing
the TEV-501
Before using for the first time
➮Open the lower storage
compartment of the TEV-501’s
case, and remove the cigarette
lighter adapter and the four straps.
➮Close the lower storage
compartment.
➮Remove the unit from its case.
➮Thread the adapter cable through
the opening in the case.
➮Connect the plug to the DC 12V
input of the TEV-501.
➮Place the unit back into the case.
➮Secure the TEV-501 using the
Velcro straps located inside the
case by threading the Velcro straps
through the eyelets on the side of
the unit.
SECURING AND INSTALLING THE TEV-501
DC 12V

1717
ENGLISH DEUTSCHFRANÇAISITALIANO
NEDERLANDS
SVENSKAESPAÑOL
PORTUGUÊS
Securing the TEV-501 between
the front seats
➮Repeat this procedure for the
passenger seat.
➮Now take one of the straps that
does have an S-hook attached.
➮Connect the buckle of the S-hook
strap with one of the buckles at the
lower end of the case.
➮Place the strap around the seat rail
of the driver seat or the lower
safety belt attachment point.
➮Thread the strap through the S-
hook.
➮Pull the strap tight.
SECURING AND INSTALLING THE TEV-501
➮Take one of the straps that does
not have an S-hook attached.
➮Place the strap around one of the
headrest supports on the driver
seat.
➮Fasten the belt around the
headrest support using the two
buckles.
➮Connect one of the strap’s buckles
to the corresponding buckle on the
side of the bag. You can adjust the
length of the strap to suit the
conditions in the vehicle interior.

18
Operating the TEV-501
Switching the TEV-501 on/off
➮Press the POWER button to switch
the TEV-501 on/off.
Playing a video cassette
Note
The TEV-501 is designed to play
standard consumer video cassettes of
theVHS variety(Video Home System).
Nevertryinsertingothercassettesother
than VHS cassettes into the TEV-501.
Suitable VHS video cassettes are
labelled with the VHS symbol. Blau-
punkt-Werkecannotacceptanyliability
for damage that may occur from using
other video cassettes in this unit.
Inserting a video cassette
➮Carefully insert a video cassette
with its printed side uppermost and
its flap side first into the cassette
compartment of the TEV-501.
Removing a video cassette
➮With playback stopped, press the
STOP/EJECT button.
Playing a video cassette
➮To begin playback, press the PLAY
button.
Note
Video cassettes will be played
automaticallyiftheirrecordingprotection
mechanism has been activated.
➮Repeat this procedure for the
passenger seat.
➮Open the case’s upper lid.
➮Flip up the monitor.
➮Open the zip fasteners at the front
of the case. The unit is angled at
around 15°. Close the zip fasteners
until the unit is set at an angle that
you find convenient.
Operating the TEV-501 in
buildings
➮Place the unit on a secure and
level surface.
➮Open the lower storage
compartment in the TEV-501’s
case, and remove the power
supply unit.
➮Connect the output of the power
supply unit to the DC 12V input of
the TEV-501.
➮Connect the mains power cable to
a 220-volt socket.
OPERATING THE TEV-501

1919
ENGLISH DEUTSCHFRANÇAISITALIANO
NEDERLANDS
SVENSKAESPAÑOL
PORTUGUÊS
Fast tape winding
To fast forward the tape,
➮Press the FFWD button.
To fast rewind the tape,
➮Press the REW button.
Connecting external sources
(games consoles, DVD players
and television receivers)
You can connect up to two external
videoandaudiosourcestotheTEV-501
(e.g. a games console or DVD player),
and use the monitor and loudspeakers
for the output. The TEV-501 has two
separate inputs for video signals and
stereo audio signals. The inputs are
locatedonthefrontandbackoftheTEV-
501.Ifalltheinputsareinuse,theTEV-
501 gives priority to the inputs at the
front of the unit.
Connecting a games console/DVD
player to the TEV-501
➮Use a suitable cable to connect a
games console/DVD player to the
VIDEO IN, AUDIO IN L and
AUDIO IN R inputs at the front or
back of the TEV-501.
ToavoiddamagetotheTEV-501
and the games console, make
absolutely certain that the cable
coloursmatchthejackcoloursonthe
units.
➮First switch on the games console.
➮Now switch on the TEV-501.
To enable an external source to output
on the TEV-501,
➮Press the STOP button.
Connecting an external monitor
You can connect a monitor to the TEV-
501 in order to output to this monitor.
➮Connect an external monitor or
television to the AV OUT
connection on the TEV-501.
Connecting a television receiver
to the TEV-501
Thereisa32-pinconnectionattheback
of the TEV-501 to allow you to connect
the optionally available TET-01
television receiver. If you want to
purchase a television receiver for the
TEV-501, please contact a Blaupunkt
dealer.
Headphone connection
There are two 3.5 mm headphone
connections at the front of theTEV-501
labelled HEADPHONE 1 and
HEADPHONE 2. You can connect
headphones to either of these jacks. If
you connect a headphone to the
HEADPHONE1jack,theunit’sinternal
loudspeakerswillbedeactivated.Ifyou
only connect up the HEADPHONE 2
jack, sound will be outputted
simultaneously over the internal
loudspeakers.
OPERATING THE TEV-501