Blaupunkt RVM 7.1 User manual

REAR VIEW MONITOR
RVM 7.1 | RVM 5.1
Enjoy it.
DE Bedienungsanleitung
EN Owner’s manual
PL Instrukcja obsługi
FR Mode d’emploi
ES Manual de instrucciones
IT Manuale di istruzioni

2
MONITOR INSTALLATIONOPTIONAL
7 Digital LCD Monitor
Connection cable
Accessories
Instruction Manual Packing Box
PACAGE CONTENTS LIST
1. Prepare all the parts of the kit before installation.
Mnitr Inst ste
MONITOR INSTALLATION
1NORMAL/MIRROR LIP
PARING LINE SELECTION
2VERTICAL LIPPING
4
3
2
For the function of image flip, you can adjust through the menu, or press the sixth button to choose
the mode you need
Also, you can switch parking line onoff
Mutinguge Seectin
language Chinese, English, Italian,
Spanish, Portuguese,apanese, ect
2. Fix the screws and let the U brack tight(see below pictures).
3. Move the monitor to the desired location then fix screws on the bottom of the
bracket(see below pictures).
5 Digital LCD Monitor
Connection cable
Accessories
Instruction Manual Packing Box
①② ③
1. Fix the monitor and suction cup
2. Lower the joystick while firmly pressing the suction plate against the parts to be connected to a flat
surface, such as the windshieldinstrument panel. (hen removing it, just lift the lever to remove it
easily.)
3. Rotate the screw to adjust the height of the monitor in an easy-to-observe manner.
Insttin Lctin Reerence
Because of the monitor bracket, it is difficult to fix it if
the dashboard is not flat,we recommend to install it
on the windshield.
The Screen Prrtin Adjustment
16 43
It have two type of screen proportion, one for 16, one for 43, you can choose the type you like,
enter the menu to adjust.
PACKUNGSINHALT
MONTAGE DES BILDSCHIRMS
1. Bereiten Sie alle Komponenten vor der Montage vor.
2
MONITOR INSTALLATIONOPTIONAL
7 Digital LCD Monitor
Connection cable
Accessories
Instruction Manual Packing Box
PACAGE CONTENTS LIST
1. Prepare all the parts of the kit before installation.
Mnitr Inst ste
MONITOR INSTALLATION
1NORMAL/MIRROR LIP
PARING LINE SELECTION
2VERTICAL LIPPING
4
3
2
For the function of image flip, you can adjust through the menu, or press the sixth button to choose
the mode you need
Also, you can switch parking line onoff
Mutinguge Seectin
language Chinese, English, Italian,
Spanish, Portuguese,apanese, ect
2. Fix the screws and let the U brack tight(see below pictures).
3. Move the monitor to the desired location then fix screws on the bottom of the
bracket(see below pictures).
5 Digital LCD Monitor
Connection cable
Accessories
Instruction Manual Packing Box
①② ③
1. Fix the monitor and suction cup
2. Lower the joystick while firmly pressing the suction plate against the parts to be connected to a flat
surface, such as the windshieldinstrument panel. (hen removing it, just lift the lever to remove it
easily.)
3. Rotate the screw to adjust the height of the monitor in an easy-to-observe manner.
Insttin Lctin Reerence
Because of the monitor bracket, it is difficult to fix it if
the dashboard is not flat,we recommend to install it
on the windshield.
The Screen Prrtin Adjustment
16 43
It have two type of screen proportion, one for 16, one for 43, you can choose the type you like,
enter the menu to adjust.
2
MONITOR INSTALLATIONOPTIONAL
7 Digital LCD Monitor
Connection cable
Accessories
Instruction Manual Packing Box
PACAGE CONTENTS LIST
1. Prepare all the parts of the kit before installation.
Mnitr Inst ste
MONITOR INSTALLATION
1NORMAL/MIRROR LIP
PARING LINE SELECTION
2VERTICAL LIPPING
4
3
2
For the function of image flip, you can adjust through the menu, or press the sixth button to choose
the mode you need
Also, you can switch parking line onoff
Mutinguge Seectin
language Chinese, English, Italian,
Spanish, Portuguese,apanese, ect
2. Fix the screws and let the U brack tight(see below pictures).
3. Move the monitor to the desired location then fix screws on the bottom of the
bracket(see below pictures).
5 Digital LCD Monitor
Connection cable
Accessories
Instruction Manual Packing Box
①② ③
1. Fix the monitor and suction cup
2. Lower the joystick while firmly pressing the suction plate against the parts to be connected to a flat
surface, such as the windshieldinstrument panel. (hen removing it, just lift the lever to remove it
easily.)
3. Rotate the screw to adjust the height of the monitor in an easy-to-observe manner.
Insttin Lctin Reerence
Because of the monitor bracket, it is difficult to fix it if
the dashboard is not flat,we recommend to install it
on the windshield.
The Screen Prrtin Adjustment
16 43
It have two type of screen proportion, one for 16, one for 43, you can choose the type you like,
enter the menu to adjust.
2
MONITOR INSTALLATIONOPTIONAL
7 Digital LCD Monitor
Connection cable
Accessories
Instruction Manual Packing Box
PACAGE CONTENTS LIST
1. Prepare all the parts of the kit before installation.
Mnitr Inst ste
MONITOR INSTALLATION
1NORMAL/MIRROR LIP
PARING LINE SELECTION
2VERTICAL LIPPING
4
3
2
For the function of image flip, you can adjust through the menu, or press the sixth button to choose
the mode you need
Also, you can switch parking line onoff
Mutinguge Seectin
language Chinese, English, Italian,
Spanish, Portuguese,apanese, ect
2. Fix the screws and let the U brack tight(see below pictures).
3. Move the monitor to the desired location then fix screws on the bottom of the
bracket(see below pictures).
5 Digital LCD Monitor
Connection cable
Accessories
Instruction Manual Packing Box
①② ③
1. Fix the monitor and suction cup
2. Lower the joystick while firmly pressing the suction plate against the parts to be connected to a flat
surface, such as the windshieldinstrument panel. (hen removing it, just lift the lever to remove it
easily.)
3. Rotate the screw to adjust the height of the monitor in an easy-to-observe manner.
Insttin Lctin Reerence
Because of the monitor bracket, it is difficult to fix it if
the dashboard is not flat,we recommend to install it
on the windshield.
The Screen Prrtin Adjustment
16 43
It have two type of screen proportion, one for 16, one for 43, you can choose the type you like,
enter the menu to adjust.
Digitaler 7-Zoll-LCD-
Bildschirm Zubehör
Zubehör
Box
Box
Bedienungsanleitung Anschlusskabel
Bedienungsanleitung Anschlusskabel
Digitaler 5-Zoll-LCD-
Bildschirm
2
MONITOR INSTALLATIONOPTIONAL
7 Digital LCD Monitor
Connection cable
Accessories
Instruction Manual Packing Box
PACAGE CONTENTS LIST
1. Prepare all the parts of the kit before installation.
Mnitr Inst ste
MONITOR INSTALLATION
1NORMAL/MIRROR LIP
PARING LINE SELECTION
2VERTICAL LIPPING
4
3
2
For the function of image flip, you can adjust through the menu, or press the sixth button to choose
the mode you need
Also, you can switch parking line onoff
Mutinguge Seectin
language Chinese, English, Italian,
Spanish, Portuguese,apanese, ect
2. Fix the screws and let the U brack tight(see below pictures).
3. Move the monitor to the desired location then fix screws on the bottom of the
bracket(see below pictures).
5 Digital LCD Monitor
Connection cable
Accessories
Instruction Manual Packing Box
①② ③
1. Fix the monitor and suction cup
2. Lower the joystick while firmly pressing the suction plate against the parts to be connected to a flat
surface, such as the windshieldinstrument panel. (hen removing it, just lift the lever to remove it
easily.)
3. Rotate the screw to adjust the height of the monitor in an easy-to-observe manner.
Insttin Lctin Reerence
Because of the monitor bracket, it is difficult to fix it if
the dashboard is not flat,we recommend to install it
on the windshield.
The Screen Prrtin Adjustment
16 43
It have two type of screen proportion, one for 16, one for 43, you can choose the type you like,
enter the menu to adjust.
2
MONITOR INSTALLATIONOPTIONAL
7 Digital LCD Monitor
Connection cable
Accessories
Instruction Manual Packing Box
PACAGE CONTENTS LIST
1. Prepare all the parts of the kit before installation.
Mnitr Inst ste
MONITOR INSTALLATION
1NORMAL/MIRROR LIP
PARING LINE SELECTION
2VERTICAL LIPPING
4
3
2
For the function of image flip, you can adjust through the menu, or press the sixth button to choose
the mode you need
Also, you can switch parking line onoff
Mutinguge Seectin
language Chinese, English, Italian,
Spanish, Portuguese,apanese, ect
2. Fix the screws and let the U brack tight(see below pictures).
3. Move the monitor to the desired location then fix screws on the bottom of the
bracket(see below pictures).
5 Digital LCD Monitor
Connection cable
Accessories
Instruction Manual Packing Box
①② ③
1. Fix the monitor and suction cup
2. Lower the joystick while firmly pressing the suction plate against the parts to be connected to a flat
surface, such as the windshieldinstrument panel. (hen removing it, just lift the lever to remove it
easily.)
3. Rotate the screw to adjust the height of the monitor in an easy-to-observe manner.
Insttin Lctin Reerence
Because of the monitor bracket, it is difficult to fix it if
the dashboard is not flat,we recommend to install it
on the windshield.
The Screen Prrtin Adjustment
16 43
It have two type of screen proportion, one for 16, one for 43, you can choose the type you like,
enter the menu to adjust.
2
MONITOR INSTALLATIONOPTIONAL
7 Digital LCD Monitor
Connection cable
Accessories
Instruction Manual Packing Box
PACAGE CONTENTS LIST
1. Prepare all the parts of the kit before installation.
Mnitr Inst ste
MONITOR INSTALLATION
1NORMAL/MIRROR LIP
PARING LINE SELECTION
2VERTICAL LIPPING
4
3
2
For the function of image flip, you can adjust through the menu, or press the sixth button to choose
the mode you need
Also, you can switch parking line onoff
Mutinguge Seectin
language Chinese, English, Italian,
Spanish, Portuguese,apanese, ect
2. Fix the screws and let the U brack tight(see below pictures).
3. Move the monitor to the desired location then fix screws on the bottom of the
bracket(see below pictures).
5 Digital LCD Monitor
Connection cable
Accessories
Instruction Manual Packing Box
①② ③
1. Fix the monitor and suction cup
2. Lower the joystick while firmly pressing the suction plate against the parts to be connected to a flat
surface, such as the windshieldinstrument panel. (hen removing it, just lift the lever to remove it
easily.)
3. Rotate the screw to adjust the height of the monitor in an easy-to-observe manner.
Insttin Lctin Reerence
Because of the monitor bracket, it is difficult to fix it if
the dashboard is not flat,we recommend to install it
on the windshield.
The Screen Prrtin Adjustment
16 43
It have two type of screen proportion, one for 16, one for 43, you can choose the type you like,
enter the menu to adjust.
2
MONITOR INSTALLATIONOPTIONAL
7 Digital LCD Monitor
Connection cable
Accessories
Instruction Manual Packing Box
PACAGE CONTENTS LIST
1. Prepare all the parts of the kit before installation.
Mnitr Inst ste
MONITOR INSTALLATION
1NORMAL/MIRROR LIP
PARING LINE SELECTION
2VERTICAL LIPPING
4
3
2
For the function of image flip, you can adjust through the menu, or press the sixth button to choose
the mode you need
Also, you can switch parking line onoff
Mutinguge Seectin
language Chinese, English, Italian,
Spanish, Portuguese,apanese, ect
2. Fix the screws and let the U brack tight(see below pictures).
3. Move the monitor to the desired location then fix screws on the bottom of the
bracket(see below pictures).
5 Digital LCD Monitor
Connection cable
Accessories
Instruction Manual Packing Box
①② ③
1. Fix the monitor and suction cup
2. Lower the joystick while firmly pressing the suction plate against the parts to be connected to a flat
surface, such as the windshieldinstrument panel. (hen removing it, just lift the lever to remove it
easily.)
3. Rotate the screw to adjust the height of the monitor in an easy-to-observe manner.
Insttin Lctin Reerence
Because of the monitor bracket, it is difficult to fix it if
the dashboard is not flat,we recommend to install it
on the windshield.
The Screen Prrtin Adjustment
16 43
It have two type of screen proportion, one for 16, one for 43, you can choose the type you like,
enter the menu to adjust.
2
MONITOR INSTALLATIONOPTIONAL
7 Digital LCD Monitor
Connection cable
Accessories
Instruction Manual Packing Box
PACAGE CONTENTS LIST
1. Prepare all the parts of the kit before installation.
Mnitr Inst ste
MONITOR INSTALLATION
1NORMAL/MIRROR LIP
PARING LINE SELECTION
2VERTICAL LIPPING
4
3
2
For the function of image flip, you can adjust through the menu, or press the sixth button to choose
the mode you need
Also, you can switch parking line onoff
Mutinguge Seectin
language Chinese, English, Italian,
Spanish, Portuguese,apanese, ect
2. Fix the screws and let the U brack tight(see below pictures).
3. Move the monitor to the desired location then fix screws on the bottom of the
bracket(see below pictures).
5 Digital LCD Monitor
Connection cable
Accessories
Instruction Manual Packing Box
①② ③
1. Fix the monitor and suction cup
2. Lower the joystick while firmly pressing the suction plate against the parts to be connected to a flat
surface, such as the windshieldinstrument panel. (hen removing it, just lift the lever to remove it
easily.)
3. Rotate the screw to adjust the height of the monitor in an easy-to-observe manner.
Insttin Lctin Reerence
Because of the monitor bracket, it is difficult to fix it if
the dashboard is not flat,we recommend to install it
on the windshield.
The Screen Prrtin Adjustment
16 43
It have two type of screen proportion, one for 16, one for 43, you can choose the type you like,
enter the menu to adjust.
RVM 5.1
RVM 7.1
Zubehör

DE
RVM 5.1
RVM 7.1
MONTAGE DES BILDSCHIRMS
2. Ziehen Sie die Schrauben an und befestigen Sie die U-förmige Halterung sicher
(siehe Abbildungen unten).
3. Bringen Sie den Bildschirm am gewünschten Montageort an und ziehen Sie die
Schrauben an der Unterseite der Halterung fest (siehe Abbildungen unten).
Alternative Befestigungsmethode:
1) Befestigen Sie den Bildschirm am Saugnapf.
2) Senken Sie den Hebel des Saugnapfes, während Sie ihn fest gegen die ache Oberäche
drücken, an der er befestigt werden soll, z. B. Windschutzscheibe oder Armaturenbrett.
(Zum Entfernen einfach den Hebel des Saugnapfes anheben und abnehmen).
3) Verwenden Sie die Drehknöpfe, um die Höhe des Bildschirms so einzustellen, dass er
sich in einer für den Benutzer angenehmen Position bendet.
Informationen zum Montageort
Bei einem nicht ebenen Armaturenbrett kann sich die
Montage der Bildschirmhalterung als schwierig erweisen.
In diesem Fall empfehlen wir die Montage an der
Windschutzscheibe.
1) 2) 3)
2
MONITOR INSTALLATIONOPTIONAL
7 Digital LCD Monitor
Connection cable
Accessories
Instruction Manual Packing Box
PACAGE CONTENTS LIST
1. Prepare all the parts of the kit before installation.
Mnitr Inst ste
MONITOR INSTALLATION
1NORMAL/MIRROR LIP
PARING LINE SELECTION
2VERTICAL LIPPING
4
3
2
For the function of image flip, you can adjust through the menu, or press the sixth button to choose
the mode you need
Also, you can switch parking line onoff
Mutinguge Seectin
language Chinese, English, Italian,
Spanish, Portuguese,apanese, ect
2. Fix the screws and let the U brack tight(see below pictures).
(siehe Abbildungen un
ten).
3. Move the monitor to the desired location then fix screws on the bottom of the
bracket(see below pictures).
5 Digital LCD Monitor
Connection cable
Accessories
Instruction Manual Packing Box
①② ③
1. Fix the monitor and suction cup
2. Lower the joystick while firmly pressing the suction plate against the parts to be connected to a flat
surface, such as the windshieldinstrument panel. (hen removing it, just lift the lever to remove it
easily.)
3. Rotate the screw to adjust the height of the monitor in an easy-to-observe manner.
Insttin Lctin Reerence
Because of the monitor bracket, it is difficult to fix it if
the dashboard is not flat,we recommend to install it
on the windshield.
The Screen Prrtin Adjustment
16 43
It have two type of screen proportion, one for 16, one for 43, you can choose the type you like,
enter the menu to adjust.
2
MONITOR INSTALLATIONOPTIONAL
7 Digital LCD Monitor
Connection cable
Accessories
Instruction Manual Packing Box
PACAGE CONTENTS LIST
1. Prepare all the parts of the kit before installation.
Mnitr Inst ste
MONITOR INSTALLATION
1NORMAL/MIRROR LIP
PARING LINE SELECTION
2VERTICAL LIPPING
4
3
2
For the function of image flip, you can adjust through the menu, or press the sixth button to choose
the mode you need
Also, you can switch parking line onoff
Mutinguge Seectin
language Chinese, English, Italian,
Spanish, Portuguese,apanese, ect
2. Fix the screws and let the U brack tight(see below pictures).
3. Move the monitor to the desired location then fix screws on the bottom of the
bracket(see below pictures).
5 Digital LCD Monitor
Connection cable
Accessories
Instruction Manual Packing Box
①② ③
1. Fix the monitor and suction cup
2. Lower the joystick while firmly pressing the suction plate against the parts to be connected to a flat
surface, such as the windshieldinstrument panel. (hen removing it, just lift the lever to remove it
easily.)
3. Rotate the screw to adjust the height of the monitor in an easy-to-observe manner.
Insttin Lctin Reerence
Because of the monitor bracket, it is difficult to fix it if
the dashboard is not flat,we recommend to install it
on the windshield.
The Screen Prrtin Adjustment
16 43
It have two type of screen proportion, one for 16, one for 43, you can choose the type you like,
enter the menu to adjust.
2
MONITOR INSTALLATIONOPTIONAL
7 Digital LCD Monitor
Connection cable
Accessories
Instruction Manual Packing Box
PACAGE CONTENTS LIST
1. Prepare all the parts of the kit before installation.
Mnitr Inst ste
MONITOR INSTALLATION
1NORMAL/MIRROR LIP
PARING LINE SELECTION
2VERTICAL LIPPING
4
3
2
For the function of image flip, you can adjust through the menu, or press the sixth button to choose
the mode you need
Also, you can switch parking line onoff
Mutinguge Seectin
language Chinese, English, Italian,
Spanish, Portuguese,apanese, ect
2. Fix the screws and let the U brack tight(see below pictures).
3. Move the monitor to the desired location then fix screws on the bottom of the
bracket(see below pictures).
5 Digital LCD Monitor
Connection cable
Accessories
Instruction Manual Packing Box
①② ③
1. Fix the monitor and suction cup
2. Lower the joystick while firmly pressing the suction plate against the parts to be connected to a flat
surface, such as the windshieldinstrument panel. (hen removing it, just lift the lever to remove it
easily.)
3. Rotate the screw to adjust the height of the monitor in an easy-to-observe manner.
Insttin Lctin Reerence
Because of the monitor bracket, it is difficult to fix it if
the dashboard is not flat,we recommend to install it
on the windshield.
The Screen Prrtin Adjustment
16 43
It have two type of screen proportion, one for 16, one for 43, you can choose the type you like,
enter the menu to adjust.

MONTAGE DES BILDSCHIRMS
2
MONITOR INSTALLATIONOPTIONAL
7 Digital LCD Monitor
Connection cable
Accessories
Instruction Manual Packing Box
PACAGE CONTENTS LIST
1. Prepare all the parts of the kit before installation.
Mnitr Inst ste
MONITOR INSTALLATION
1NORMAL/MIRROR LIP
PARING LINE SELECTION
2VERTICAL LIPPING
4
3
2
For the function of image flip, you can adjust through the menu, or press the sixth button to choose
the mode you need
Also, you can switch parking line onoff
Mutinguge Seectin
language Chinese, English, Italian,
Spanish, Portuguese,apanese, ect
2. Fix the screws and let the U brack tight(see below pictures).
3. Move the monitor to the desired location then fix screws on the bottom of the
bracket(see below pictures).
5 Digital LCD Monitor
Connection cable
Accessories
Instruction Manual Packing Box
①② ③
1. Fix the monitor and suction cup
2. Lower the joystick while firmly pressing the suction plate against the parts to be connected to a flat
surface, such as the windshieldinstrument panel. (hen removing it, just lift the lever to remove it
easily.)
3. Rotate the screw to adjust the height of the monitor in an easy-to-observe manner.
Insttin Lctin Reerence
Because of the monitor bracket, it is difficult to fix it if
the dashboard is not flat,we recommend to install it
on the windshield.
The Screen Prrtin Adjustment
16 43
It have two type of screen proportion, one for 16, one for 43, you can choose the type you like,
enter the menu to adjust.
1. NORMALANSICHT / SPIEGELBILD
Sie können die
Bildumkehrfunktion über das
Menü bedienen oder den
gewünschten Modus mit der
sechsten Taste auswählen.
2. VERTIKALE BILDUMKEHRUNG
2
MONITOR INSTALLATIONOPTIONAL
7 Digital LCD Monitor
Connection cable
Accessories
Instruction Manual Packing Box
PACAGE CONTENTS LIST
1. Prepare all the parts of the kit before installation.
Mnitr Inst ste
MONITOR INSTALLATION
1NORMAL/MIRROR LIP
PARING LINE SELECTION
2VERTICAL LIPPING
4
3
2
For the function of image flip, you can adjust through the menu, or press the sixth button to choose
the mode you need
Also, you can switch parking line onoff
Mutinguge Seectin
language Chinese, English, Italian,
Spanish, Portuguese,apanese, ect
2. Fix the screws and let the U brack tight(see below pictures).
3. Move the monitor to the desired location then fix screws on the bottom of the
bracket(see below pictures).
5 Digital LCD Monitor
Connection cable
Accessories
Instruction Manual Packing Box
①② ③
1. Fix the monitor and suction cup
2. Lower the joystick while firmly pressing the suction plate against the parts to be connected to a flat
surface, such as the windshieldinstrument panel. (hen removing it, just lift the lever to remove it
easily.)
3. Rotate the screw to adjust the height of the monitor in an easy-to-observe manner.
Insttin Lctin Reerence
Because of the monitor bracket, it is difficult to fix it if
the dashboard is not flat,we recommend to install it
on the windshield.
The Screen Prrtin Adjustment
16 43
It have two type of screen proportion, one for 16, one for 43, you can choose the type you like,
enter the menu to adjust.
Sie können auch Parklinien
aktivieren oder deaktivieren.
3. AUSWAHL DER PARKLINIE
2
MONITOR INSTALLATIONOPTIONAL
7 Digital LCD Monitor
Connection cable
Accessories
Instruction Manual Packing Box
PACAGE CONTENTS LIST
1. Prepare all the parts of the kit before installation.
Mnitr Inst ste
MONITOR INSTALLATION
1NORMAL/MIRROR LIP
PARING LINE SELECTION
2VERTICAL LIPPING
4
3
2
For the function of image flip, you can adjust through the menu, or press the sixth button to choose
the mode you need
Also, you can switch parking line onoff
Mutinguge Seectin
language Chinese, English, Italian,
Spanish, Portuguese,apanese, ect
2. Fix the screws and let the U brack tight(see below pictures).
3. Move the monitor to the desired location then fix screws on the bottom of the
bracket(see below pictures).
5 Digital LCD Monitor
Connection cable
Accessories
Instruction Manual Packing Box
①② ③
1. Fix the monitor and suction cup
2. Lower the joystick while firmly pressing the suction plate against the parts to be connected to a flat
surface, such as the windshieldinstrument panel. (hen removing it, just lift the lever to remove it
easily.)
3. Rotate the screw to adjust the height of the monitor in an easy-to-observe manner.
Insttin Lctin Reerence
Because of the monitor bracket, it is difficult to fix it if
the dashboard is not flat,we recommend to install it
on the windshield.
The Screen Prrtin Adjustment
16 43
It have two type of screen proportion, one for 16, one for 43, you can choose the type you like,
enter the menu to adjust.
Chinesisch, Englisch,
Italienisch, Spanisch,
Portugiesisch, Japanisch
usw.
Sprachauswahl
2
MONITOR INSTALLATIONOPTIONAL
7 Digital LCD Monitor
Connection cable
Accessories
Instruction Manual Packing Box
PACAGE CONTENTS LIST
1. Prepare all the parts of the kit before installation.
Mnitr Inst ste
MONITOR INSTALLATION
1NORMAL/MIRROR LIP
PARING LINE SELECTION
2VERTICAL LIPPING
4
3
2
For the function of image flip, you can adjust through the menu, or press the sixth button to choose
the mode you need
Also, you can switch parking line onoff
Mutinguge Seectin
language
Chinese, English, Italian,
Spanish, Portuguese,apanese, ect
2. Fix the screws and let the U brack tight(see below pictures).
3. Move the monitor to the desired location then fix screws on the bottom of the
bracket(see below pictures).
5 Digital LCD Monitor
Connection cable
Accessories
Instruction Manual Packing Box
①② ③
1. Fix the monitor and suction cup
2. Lower the joystick while firmly pressing the suction plate against the parts to be connected to a flat
surface, such as the windshieldinstrument panel. (hen removing it, just lift the lever to remove it
easily.)
3. Rotate the screw to adjust the height of the monitor in an easy-to-observe manner.
Insttin Lctin Reerence
Because of the monitor bracket, it is difficult to fix it if
the dashboard is not flat,we recommend to install it
on the windshield.
The Screen Prrtin Adjustment
16 43
It have two type of screen proportion, one for 16, one for 43, you can choose the type you like,
enter the menu to adjust.
Mit dem Gerät können Sie
zwei Bildformate einstellen:
16:9 und 4:3. Im Menü
können Sie das gewünschte
Format auswählen.
Einstellen des Bildformats
2
MONITOR INSTALLATIONOPTIONAL
7 Digital LCD Monitor
Connection cable
Accessories
Instruction Manual Packing Box
PACAGE CONTENTS LIST
1. Prepare all the parts of the kit before installation.
Mnitr Inst ste
MONITOR INSTALLATION
1NORMAL/MIRROR LIP
PARING LINE SELECTION
2VERTICAL LIPPING
4
3
2
For the function of image flip, you can adjust through the menu, or press the sixth button to choose
the mode you need
Also, you can switch parking line onoff
Mutinguge Seectin
language Chinese, English, Italian,
Spanish, Portuguese,apanese, ect
2. Fix the screws and let the U brack tight(see below pictures).
3. Move the monitor to the desired location then fix screws on the bottom of the
bracket(see below pictures).
5 Digital LCD Monitor
Connection cable
Accessories
Instruction Manual Packing Box
①② ③
1. Fix the monitor and suction cup
2. Lower the joystick while firmly pressing the suction plate against the parts to be connected to a flat
surface, such as the windshieldinstrument panel. (hen removing it, just lift the lever to remove it
easily.)
3. Rotate the screw to adjust the height of the monitor in an easy-to-observe manner.
Insttin Lctin Reerence
Because of the monitor bracket, it is difficult to fix it if
the dashboard is not flat,we recommend to install it
on the windshield.
The Screen Prrtin Adjustment
16 43
It have two type of screen proportion, one for 16, one for 43, you can choose the type you like,
enter the menu to adjust.

DE
MONTAGE DES BILDSCHIRMS
SCHALTPLAN
Umschaltung PAL/NTSC
Einstellung der Helligkeit
Das Gerät unterstützt die
Videoformatstandards
PAL und NTSC. Außerdem
können Sie die Option
„Automatisch“ wählen.
Auslösedraht
Bildschirm RVM 7.1
Bildschirm RVM 5.1
12 – 24 V
Masse
ROT (BATTERIE +12 V)
SCHWARZ (MASSE)
Das Gerät verfügt über 5 Helligkeitsstufen: Standard, Leicht, Grell und Hell. Drücken
Sie die siebte Taste auf dem Bildschirm, um die gewünschte Helligkeitsstufe
einzustellen.
IMPORTANT NOTES
1.The rear(front) view camera functions technically as a driver assistance
device, which cannot be taken as substitute for driver’s responsibility
when operating the vehicle.
2.To keep the camera working properly, please clean the camera regularly
to free it from dirt, water drops, snowdrops,etc.
3.Although the camera is designed to be waterproof, please do NOT use
high-pressure water jet to wash the camera as this may break the glass
lens.
4.Keep the cables of the camera away from high temperature objects such
as engine or exhaust.
5.If the camera model you have comes without in-built LED lights, please
turn on your license plate light for better vision at night or in dark areas.
6.The camera are applicable to vehicles with DC 12V power output(10%
higher or lower allowed), please do NOT use it on vehicles with DC 24V
or other power output out of this range, otherwise it is very likely to get
burned.
7.The specifications of the camera are subject to change without prior
notice.
5
CONNECTION DIAGRAM
GND
Trigger wire
12 - 24V
Brightness Adjustment
PAL/NTSC Switch
PAL NTSC
For TV system, it have PAL, NTSC,or auto, you can choose the suitable system
For the brightness, it have 5 modes, it have standard mode, soft mode, vivid mode and light
mode, press the seventh button on the monitor, you can adjust the brightness according you need
Monitor
Before operating the monitor, please read this manual thoroughly
and retain it for future reference.
1
Ver 1.0
USER MANUAL
DIGITAL LCD MONITOR
Monitor
V1
V2
Fuse
RED(TO ACC +12V)
BLACK(TO GROUND)
IMPORTANT NOTES
1.The rear(front) view camera functions technically as a driver assistance
device, which cannot be taken as substitute for driver’s responsibility
when operating the vehicle.
2.To keep the camera working properly, please clean the camera regularly
to free it from dirt, water drops, snowdrops,etc.
3.Although the camera is designed to be waterproof, please do NOT use
high-pressure water jet to wash the camera as this may break the glass
lens.
4.Keep the cables of the camera away from high temperature objects such
as engine or exhaust.
5.If the camera model you have comes without in-built LED lights, please
turn on your license plate light for better vision at night or in dark areas.
6.The camera are applicable to vehicles with DC 12V power output(10%
higher or lower allowed), please do NOT use it on vehicles with DC 24V
or other power output out of this range, otherwise it is very likely to get
burned.
7.The specifications of the camera are subject to change without prior
notice.
5
CONNECTION DIAGRAM
GND
Trigger wire
12 - 24V
Brightness Adjustment
PAL/NTSC Switch
PAL NTSC
For TV system, it have PAL, NTSC,or auto, you can choose the suitable system
For the brightness, it have 5 modes, it have standard mode, soft mode, vivid mode and light
mode, press the seventh button on the monitor, you can adjust the brightness according you need
Monitor
Before operating the monitor, please read this manual thoroughly
and retain it for future reference.
1
Ver 1.0
USER MANUAL
DIGITAL LCD MONITOR
Monitor
V1
V2
Fuse
RED(TO ACC +12V)
BLACK(TO GROUND)
IMPORTANT NOTES
1.The rear(front) view camera functions technically as a driver assistance
device, which cannot be taken as substitute for driver’s responsibility
when operating the vehicle.
2.To keep the camera working properly, please clean the camera regularly
to free it from dirt, water drops, snowdrops,etc.
3.Although the camera is designed to be waterproof, please do NOT use
high-pressure water jet to wash the camera as this may break the glass
lens.
4.Keep the cables of the camera away from high temperature objects such
as engine or exhaust.
5.If the camera model you have comes without in-built LED lights, please
turn on your license plate light for better vision at night or in dark areas.
6.The camera are applicable to vehicles with DC 12V power output(10%
higher or lower allowed), please do NOT use it on vehicles with DC 24V
or other power output out of this range, otherwise it is very likely to get
burned.
7.The specifications of the camera are subject to change without prior
notice.
5
CONNECTION DIAGRAM
GND
Trigger wire
12 - 24V
Brightness Adjustment
PAL/NTSC Switch
PAL NTSC
For TV system, it have PAL, NTSC,or auto, you can choose the suitable system
For the brightness, it have 5 modes, it have standard mode, soft mode, vivid mode and light
mode, press the seventh button on the monitor, you can adjust the brightness according you need
Monitor
Before operating the monitor, please read this manual thoroughly
and retain it for future reference.
1
Ver 1.0
USER MANUAL
DIGITAL LCD MONITOR
Monitor
V1
V2
Fuse
RED(TO ACC +12V)
BLACK(TO GROUND)
Sicherung

RVM 5.1
RVM 7.1
1. Einige Funktionen, die in dieser Bedienungsanleitung beschrieben werden, sind
modellspezisch und werden möglicherweise nicht von jedem Modell unterstützt.
2. Nehmen Sie keine Änderungen oder Manipulationen am Gerät vor. Das Gerät
enthält keine Teile, die von Ihnen selbst repariert werden können.
3. Die Leistungsgrenzen des Geräts müssen beachtet werden. Lassen Sie die Reparatur
und gegebenenfalls die Montage von einem Fachmann durchführen.
4. Die Eigenmontage ist nur dann ratsam, wenn Sie Erfahrung in der Montage
solcher Geräte haben und mit der elektrischen Anlage des Fahrzeugs vertraut sind.
Beachten Sie die Markierungen auf den Anschlüssen.
5. Stellen Sie sicher, dass alle Drähte die richtigen Signale und Spannungen
übermitteln.
6. Beim Einbau des Radios darf die Aktivierung der Airbags und anderer
sicherheitsrelevanter Einrichtungen oder Bedienelemente nicht beeinträchtigt oder
verhindert werden.
7. Klemmen Sie die Fahrzeugbatterie (Minuspol, Masse) ab, bevor Sie das Gerät
einbauen, da es sonst zu Fehlfunktionen oder Beschädigungen des Gerätes oder der
Fahrzeugelektronik kommen kann. Beachten Sie die Sicherheitsempfehlungen des
Fahrzeugherstellers (Airbags, Alarmanlage, Bordcomputer, Wegfahrsperre usw.).
8.
Die Rückfahrkamera (Frontkamera) ist ein technisches Gerät mit einer
Fahrerassistenzfunktion. Dies bedeutet nicht, dass der Fahrer von seiner
Verantwortung beim Fahren befreit ist.
9. Damit die Kamera/der Bildschirm ordnungsgemäß funktioniert, sollten Sie sie
regelmäßig von Schmutz, Wassertropfen, Schnee usw. befreien.
10. Obwohl die Kamera wasserdicht ist, darf sie NICHT mit einem
Hochdruckwasserstrahl gereinigt werden, da dies zu Rissen im Glasobjektiv führen
kann.
11. Bringen Sie die Kamera-/Bildschirmkabel nicht in die Nähe von Objekten mit hohen
Temperaturen, wie z. B. einem Motor oder einer Auspuanlage.
12. Wenn Ihr Kameramodell nicht über eine eingebaute LED-Beleuchtung verfügt,
schalten Sie die Kennzeichenbeleuchtung ein, um nachts oder in dunklen Bereichen
besser gesehen zu werden.
13. Die Kamera/der Bildschirm kann mit Fahrzeugen mit einer Ausgangsleistung von
12 V DC betrieben werden (10 % weniger oder mehr Ausgangsleistung ist zulässig).
Das Modell 5.1 darf NICHT in Fahrzeugen mit einer Ausgangsleistung von 24 V DC
oder einer anderen Ausgangsleistung außerhalb dieses Bereichs verwendet werden,
da die Gefahr besteht, dass die Anlage durchbrennt.
14. Die technischen Daten der Kamera/des Bildschirms können ohne vorherige
Ankündigung geändert werden.
WICHTIGE HINWEISE

PACKAGE CONTENTS LIST
MONITOR INSTALLATION
1. Prepare all the parts of the kit before installation.
2
MONITOR INSTALLATIONOPTIONAL
7 Digital LCD Monitor
Connection cable
Accessories
Instruction Manual Packing Box
PACAGE CONTENTS LIST
1. Prepare all the parts of the kit before installation.
Mnitr Inst ste
MONITOR INSTALLATION
1NORMAL/MIRROR LIP
PARING LINE SELECTION
2VERTICAL LIPPING
4
3
2
For the function of image flip, you can adjust through the menu, or press the sixth button to choose
the mode you need
Also, you can switch parking line onoff
Mutinguge Seectin
language Chinese, English, Italian,
Spanish, Portuguese,apanese, ect
2. Fix the screws and let the U brack tight(see below pictures).
3. Move the monitor to the desired location then fix screws on the bottom of the
bracket(see below pictures).
5 Digital LCD Monitor
Connection cable
Accessories
Instruction Manual Packing Box
①② ③
1. Fix the monitor and suction cup
2. Lower the joystick while firmly pressing the suction plate against the parts to be connected to a flat
surface, such as the windshieldinstrument panel. (hen removing it, just lift the lever to remove it
easily.)
3. Rotate the screw to adjust the height of the monitor in an easy-to-observe manner.
Insttin Lctin Reerence
Because of the monitor bracket, it is difficult to fix it if
the dashboard is not flat,we recommend to install it
on the windshield.
The Screen Prrtin Adjustment
16 43
It have two type of screen proportion, one for 16, one for 43, you can choose the type you like,
enter the menu to adjust.
2
MONITOR INSTALLATIONOPTIONAL
7 Digital LCD Monitor
Connection cable
Accessories
Instruction Manual Packing Box
PACAGE CONTENTS LIST
1. Prepare all the parts of the kit before installation.
Mnitr Inst ste
MONITOR INSTALLATION
1NORMAL/MIRROR LIP
PARING LINE SELECTION
2VERTICAL LIPPING
4
3
2
For the function of image flip, you can adjust through the menu, or press the sixth button to choose
the mode you need
Also, you can switch parking line onoff
Mutinguge Seectin
language Chinese, English, Italian,
Spanish, Portuguese,apanese, ect
2. Fix the screws and let the U brack tight(see below pictures).
3. Move the monitor to the desired location then fix screws on the bottom of the
bracket(see below pictures).
5 Digital LCD Monitor
Connection cable
Accessories
Instruction Manual Packing Box
①② ③
1. Fix the monitor and suction cup
2. Lower the joystick while firmly pressing the suction plate against the parts to be connected to a flat
surface, such as the windshieldinstrument panel. (hen removing it, just lift the lever to remove it
easily.)
3. Rotate the screw to adjust the height of the monitor in an easy-to-observe manner.
Insttin Lctin Reerence
Because of the monitor bracket, it is difficult to fix it if
the dashboard is not flat,we recommend to install it
on the windshield.
The Screen Prrtin Adjustment
16 43
It have two type of screen proportion, one for 16, one for 43, you can choose the type you like,
enter the menu to adjust.
2
MONITOR INSTALLATIONOPTIONAL
7 Digital LCD Monitor
Connection cable
Accessories
Instruction Manual Packing Box
PACAGE CONTENTS LIST
1. Prepare all the parts of the kit before installation.
Mnitr Inst ste
MONITOR INSTALLATION
1NORMAL/MIRROR LIP
PARING LINE SELECTION
2VERTICAL LIPPING
4
3
2
For the function of image flip, you can adjust through the menu, or press the sixth button to choose
the mode you need
Also, you can switch parking line onoff
Mutinguge Seectin
language Chinese, English, Italian,
Spanish, Portuguese,apanese, ect
2. Fix the screws and let the U brack tight(see below pictures).
3. Move the monitor to the desired location then fix screws on the bottom of the
bracket(see below pictures).
5 Digital LCD Monitor
Connection cable
Accessories
Instruction Manual Packing Box
①② ③
1. Fix the monitor and suction cup
2. Lower the joystick while firmly pressing the suction plate against the parts to be connected to a flat
surface, such as the windshieldinstrument panel. (hen removing it, just lift the lever to remove it
easily.)
3. Rotate the screw to adjust the height of the monitor in an easy-to-observe manner.
Insttin Lctin Reerence
Because of the monitor bracket, it is difficult to fix it if
the dashboard is not flat,we recommend to install it
on the windshield.
The Screen Prrtin Adjustment
16 43
It have two type of screen proportion, one for 16, one for 43, you can choose the type you like,
enter the menu to adjust.
7“ Digital LCD Monitor Accessories
Accessories
Packing Box
Packing Box
Instruction Manual Connection cable
Instruction Manual Connection cable
5“ Digital LCD Monitor
2
MONITOR INSTALLATIONOPTIONAL
7 Digital LCD Monitor
Connection cable
Accessories
Instruction Manual Packing Box
PACAGE CONTENTS LIST
1. Prepare all the parts of the kit before installation.
Mnitr Inst ste
MONITOR INSTALLATION
1NORMAL/MIRROR LIP
PARING LINE SELECTION
2VERTICAL LIPPING
4
3
2
For the function of image flip, you can adjust through the menu, or press the sixth button to choose
the mode you need
Also, you can switch parking line onoff
Mutinguge Seectin
language Chinese, English, Italian,
Spanish, Portuguese,apanese, ect
2. Fix the screws and let the U brack tight(see below pictures).
3. Move the monitor to the desired location then fix screws on the bottom of the
bracket(see below pictures).
5 Digital LCD Monitor
Connection cable
Accessories
Instruction Manual Packing Box
①② ③
1. Fix the monitor and suction cup
2. Lower the joystick while firmly pressing the suction plate against the parts to be connected to a flat
surface, such as the windshieldinstrument panel. (hen removing it, just lift the lever to remove it
easily.)
3. Rotate the screw to adjust the height of the monitor in an easy-to-observe manner.
Insttin Lctin Reerence
Because of the monitor bracket, it is difficult to fix it if
the dashboard is not flat,we recommend to install it
on the windshield.
The Screen Prrtin Adjustment
16 43
It have two type of screen proportion, one for 16, one for 43, you can choose the type you like,
enter the menu to adjust.
2
MONITOR INSTALLATIONOPTIONAL
7 Digital LCD Monitor
Connection cable
Accessories
Instruction Manual Packing Box
PACAGE CONTENTS LIST
1. Prepare all the parts of the kit before installation.
Mnitr Inst ste
MONITOR INSTALLATION
1NORMAL/MIRROR LIP
PARING LINE SELECTION
2VERTICAL LIPPING
4
3
2
For the function of image flip, you can adjust through the menu, or press the sixth button to choose
the mode you need
Also, you can switch parking line onoff
Mutinguge Seectin
language Chinese, English, Italian,
Spanish, Portuguese,apanese, ect
2. Fix the screws and let the U brack tight(see below pictures).
3. Move the monitor to the desired location then fix screws on the bottom of the
bracket(see below pictures).
5 Digital LCD Monitor
Connection cable
Accessories
Instruction Manual Packing Box
①② ③
1. Fix the monitor and suction cup
2. Lower the joystick while firmly pressing the suction plate against the parts to be connected to a flat
surface, such as the windshieldinstrument panel. (hen removing it, just lift the lever to remove it
easily.)
3. Rotate the screw to adjust the height of the monitor in an easy-to-observe manner.
Insttin Lctin Reerence
Because of the monitor bracket, it is difficult to fix it if
the dashboard is not flat,we recommend to install it
on the windshield.
The Screen Prrtin Adjustment
16 43
It have two type of screen proportion, one for 16, one for 43, you can choose the type you like,
enter the menu to adjust.
2
MONITOR INSTALLATIONOPTIONAL
7 Digital LCD Monitor
Connection cable
Accessories
Instruction Manual Packing Box
PACAGE CONTENTS LIST
1. Prepare all the parts of the kit before installation.
Mnitr Inst ste
MONITOR INSTALLATION
1NORMAL/MIRROR LIP
PARING LINE SELECTION
2VERTICAL LIPPING
4
3
2
For the function of image flip, you can adjust through the menu, or press the sixth button to choose
the mode you need
Also, you can switch parking line onoff
Mutinguge Seectin
language Chinese, English, Italian,
Spanish, Portuguese,apanese, ect
2. Fix the screws and let the U brack tight(see below pictures).
3. Move the monitor to the desired location then fix screws on the bottom of the
bracket(see below pictures).
5 Digital LCD Monitor
Connection cable
Accessories
Instruction Manual Packing Box
①② ③
1. Fix the monitor and suction cup
2. Lower the joystick while firmly pressing the suction plate against the parts to be connected to a flat
surface, such as the windshieldinstrument panel. (hen removing it, just lift the lever to remove it
easily.)
3. Rotate the screw to adjust the height of the monitor in an easy-to-observe manner.
Insttin Lctin Reerence
Because of the monitor bracket, it is difficult to fix it if
the dashboard is not flat,we recommend to install it
on the windshield.
The Screen Prrtin Adjustment
16 43
It have two type of screen proportion, one for 16, one for 43, you can choose the type you like,
enter the menu to adjust.
2
MONITOR INSTALLATIONOPTIONAL
7 Digital LCD Monitor
Connection cable
Accessories
Instruction Manual Packing Box
PACAGE CONTENTS LIST
1. Prepare all the parts of the kit before installation.
Mnitr Inst ste
MONITOR INSTALLATION
1NORMAL/MIRROR LIP
PARING LINE SELECTION
2VERTICAL LIPPING
4
3
2
For the function of image flip, you can adjust through the menu, or press the sixth button to choose
the mode you need
Also, you can switch parking line onoff
Mutinguge Seectin
language Chinese, English, Italian,
Spanish, Portuguese,apanese, ect
2. Fix the screws and let the U brack tight(see below pictures).
3. Move the monitor to the desired location then fix screws on the bottom of the
bracket(see below pictures).
5 Digital LCD Monitor
Connection cable
Accessories
Instruction Manual Packing Box
①② ③
1. Fix the monitor and suction cup
2. Lower the joystick while firmly pressing the suction plate against the parts to be connected to a flat
surface, such as the windshieldinstrument panel. (hen removing it, just lift the lever to remove it
easily.)
3. Rotate the screw to adjust the height of the monitor in an easy-to-observe manner.
Insttin Lctin Reerence
Because of the monitor bracket, it is difficult to fix it if
the dashboard is not flat,we recommend to install it
on the windshield.
The Screen Prrtin Adjustment
16 43
It have two type of screen proportion, one for 16, one for 43, you can choose the type you like,
enter the menu to adjust.
2
MONITOR INSTALLATIONOPTIONAL
7 Digital LCD Monitor
Connection cable
Accessories
Instruction Manual Packing Box
PACAGE CONTENTS LIST
1. Prepare all the parts of the kit before installation.
Mnitr Inst ste
MONITOR INSTALLATION
1NORMAL/MIRROR LIP
PARING LINE SELECTION
2VERTICAL LIPPING
4
3
2
For the function of image flip, you can adjust through the menu, or press the sixth button to choose
the mode you need
Also, you can switch parking line onoff
Mutinguge Seectin
language Chinese, English, Italian,
Spanish, Portuguese,apanese, ect
2. Fix the screws and let the U brack tight(see below pictures).
3. Move the monitor to the desired location then fix screws on the bottom of the
bracket(see below pictures).
5 Digital LCD Monitor
Connection cable
Accessories
Instruction Manual Packing Box
①② ③
1. Fix the monitor and suction cup
2. Lower the joystick while firmly pressing the suction plate against the parts to be connected to a flat
surface, such as the windshieldinstrument panel. (hen removing it, just lift the lever to remove it
easily.)
3. Rotate the screw to adjust the height of the monitor in an easy-to-observe manner.
Insttin Lctin Reerence
Because of the monitor bracket, it is difficult to fix it if
the dashboard is not flat,we recommend to install it
on the windshield.
The Screen Prrtin Adjustment
16 43
It have two type of screen proportion, one for 16, one for 43, you can choose the type you like,
enter the menu to adjust.
2
MONITOR INSTALLATIONOPTIONAL
7 Digital LCD Monitor
Connection cable
Accessories
Instruction Manual Packing Box
PACAGE CONTENTS LIST
1. Prepare all the parts of the kit before installation.
Mnitr Inst ste
MONITOR INSTALLATION
1NORMAL/MIRROR LIP
PARING LINE SELECTION
2VERTICAL LIPPING
4
3
2
For the function of image flip, you can adjust through the menu, or press the sixth button to choose
the mode you need
Also, you can switch parking line onoff
Mutinguge Seectin
language Chinese, English, Italian,
Spanish, Portuguese,apanese, ect
2. Fix the screws and let the U brack tight(see below pictures).
3. Move the monitor to the desired location then fix screws on the bottom of the
bracket(see below pictures).
5 Digital LCD Monitor
Connection cable
Accessories
Instruction Manual Packing Box
①② ③
1. Fix the monitor and suction cup
2. Lower the joystick while firmly pressing the suction plate against the parts to be connected to a flat
surface, such as the windshieldinstrument panel. (hen removing it, just lift the lever to remove it
easily.)
3. Rotate the screw to adjust the height of the monitor in an easy-to-observe manner.
Insttin Lctin Reerence
Because of the monitor bracket, it is difficult to fix it if
the dashboard is not flat,we recommend to install it
on the windshield.
The Screen Prrtin Adjustment
16 43
It have two type of screen proportion, one for 16, one for 43, you can choose the type you like,
enter the menu to adjust.
EN
RVM 5.1
RVM 7.1
Accessories

MONITOR INSTALLATION
2. Fix the screws and let the U brack tight (see below pictures).
3. Move the monitor to the desired location then x screws on the bottom of the
bracket (see below pictures).
Alternative mounting method:
1) Fix the monitor and suction cup
2) Lower the joystick while rmly pressing the suction plate against the parts
to be connected to a at surface, such as the windshield/instrument panel.
(When removing it, just lift the lever to remove it easily.)
3) Rotate the screw to adjust the height of the monitor in an easy-to-observe
manner.
Installation Location Reference
Because of the monitor bracket, it is dicult to x it if
the dashboard is not at,we recommend to install it
on the windshield.
1) 2) 3)
2
MONITOR INSTALLATIONOPTIONAL
7 Digital LCD Monitor
Connection cable
Accessories
Instruction Manual Packing Box
PACAGE CONTENTS LIST
1. Prepare all the parts of the kit before installation.
Mnitr Inst ste
MONITOR INSTALLATION
1NORMAL/MIRROR LIP
PARING LINE SELECTION
2VERTICAL LIPPING
4
3
2
For the function of image flip, you can adjust through the menu, or press the sixth button to choose
the mode you need
Also, you can switch parking line onoff
Mutinguge Seectin
language Chinese, English, Italian,
Spanish, Portuguese,apanese, ect
2. Fix the screws and let the U brack tight(see below pictures).
3. Move the monitor to the desired location then fix screws on the bottom of the
bracket(see below pictures).
5 Digital LCD Monitor
Connection cable
Accessories
Instruction Manual Packing Box
①② ③
1. Fix the monitor and suction cup
2. Lower the joystick while firmly pressing the suction plate against the parts to be connected to a flat
surface, such as the windshieldinstrument panel. (hen removing it, just lift the lever to remove it
easily.)
3. Rotate the screw to adjust the height of the monitor in an easy-to-observe manner.
Insttin Lctin Reerence
Because of the monitor bracket, it is difficult to fix it if
the dashboard is not flat,we recommend to install it
on the windshield.
The Screen Prrtin Adjustment
16 43
It have two type of screen proportion, one for 16, one for 43, you can choose the type you like,
enter the menu to adjust.
2
MONITOR INSTALLATIONOPTIONAL
7 Digital LCD Monitor
Connection cable
Accessories
Instruction Manual Packing Box
PACAGE CONTENTS LIST
1. Prepare all the parts of the kit before installation.
Mnitr Inst ste
MONITOR INSTALLATION
1NORMAL/MIRROR LIP
PARING LINE SELECTION
2VERTICAL LIPPING
4
3
2
For the function of image flip, you can adjust through the menu, or press the sixth button to choose
the mode you need
Also, you can switch parking line onoff
Mutinguge Seectin
language Chinese, English, Italian,
Spanish, Portuguese,apanese, ect
2. Fix the screws and let the U brack tight(see below pictures).
3. Move the monitor to the desired location then fix screws on the bottom of the
bracket(see below pictures).
5 Digital LCD Monitor
Connection cable
Accessories
Instruction Manual Packing Box
①② ③
1. Fix the monitor and suction cup
2. Lower the joystick while firmly pressing the suction plate against the parts to be connected to a flat
surface, such as the windshieldinstrument panel. (hen removing it, just lift the lever to remove it
easily.)
3. Rotate the screw to adjust the height of the monitor in an easy-to-observe manner.
Insttin Lctin Reerence
Because of the monitor bracket, it is difficult to fix it if
the dashboard is not flat,we recommend to install it
on the windshield.
The Screen Prrtin Adjustment
16 43
It have two type of screen proportion, one for 16, one for 43, you can choose the type you like,
enter the menu to adjust.
2
MONITOR INSTALLATIONOPTIONAL
7 Digital LCD Monitor
Connection cable
Accessories
Instruction Manual Packing Box
PACAGE CONTENTS LIST
1. Prepare all the parts of the kit before installation.
Mnitr Inst ste
MONITOR INSTALLATION
1NORMAL/MIRROR LIP
PARING LINE SELECTION
2VERTICAL LIPPING
4
3
2
For the function of image flip, you can adjust through the menu, or press the sixth button to choose
the mode you need
Also, you can switch parking line onoff
Mutinguge Seectin
language Chinese, English, Italian,
Spanish, Portuguese,apanese, ect
2. Fix the screws and let the U brack tight(see below pictures).
3. Move the monitor to the desired location then fix screws on the bottom of the
bracket(see below pictures).
5 Digital LCD Monitor
Connection cable
Accessories
Instruction Manual Packing Box
①② ③
1. Fix the monitor and suction cup
2. Lower the joystick while firmly pressing the suction plate against the parts to be connected to a flat
surface, such as the windshieldinstrument panel. (hen removing it, just lift the lever to remove it
easily.)
3. Rotate the screw to adjust the height of the monitor in an easy-to-observe manner.
Insttin Lctin Reerence
Because of the monitor bracket, it is difficult to fix it if
the dashboard is not flat,we recommend to install it
on the windshield.
The Screen Prrtin Adjustment
16 43
It have two type of screen proportion, one for 16, one for 43, you can choose the type you like,
enter the menu to adjust.

MONITOR INSTALLATION
2
MONITOR INSTALLATIONOPTIONAL
7 Digital LCD Monitor
Connection cable
Accessories
Instruction Manual Packing Box
PACAGE CONTENTS LIST
1. Prepare all the parts of the kit before installation.
Mnitr Inst ste
MONITOR INSTALLATION
1NORMAL/MIRROR LIP
PARING LINE SELECTION
2VERTICAL LIPPING
4
3
2
For the function of image flip, you can adjust through the menu, or press the sixth button to choose
the mode you need
Also, you can switch parking line onoff
Mutinguge Seectin
language Chinese, English, Italian,
Spanish, Portuguese,apanese, ect
2. Fix the screws and let the U brack tight(see below pictures).
3. Move the monitor to the desired location then fix screws on the bottom of the
bracket(see below pictures).
5 Digital LCD Monitor
Connection cable
Accessories
Instruction Manual Packing Box
①② ③
1. Fix the monitor and suction cup
2. Lower the joystick while firmly pressing the suction plate against the parts to be connected to a flat
surface, such as the windshieldinstrument panel. (hen removing it, just lift the lever to remove it
easily.)
3. Rotate the screw to adjust the height of the monitor in an easy-to-observe manner.
Insttin Lctin Reerence
Because of the monitor bracket, it is difficult to fix it if
the dashboard is not flat,we recommend to install it
on the windshield.
The Screen Prrtin Adjustment
16 43
It have two type of screen proportion, one for 16, one for 43, you can choose the type you like,
enter the menu to adjust.
1. NORMAL/MIRROR FLIP
For the function of image
ip, you can adjust through
the menu, or press the sixth
button to choose the mode
you need
2. VERTICAL FLIPPING
2
MONITOR INSTALLATIONOPTIONAL
7 Digital LCD Monitor
Connection cable
Accessories
Instruction Manual Packing Box
PACAGE CONTENTS LIST
1. Prepare all the parts of the kit before installation.
Mnitr Inst ste
MONITOR INSTALLATION
1NORMAL/MIRROR LIP
PARING LINE SELECTION
2VERTICAL LIPPING
4
3
2
For the function of image flip, you can adjust through the menu, or press the sixth button to choose
the mode you need
Also, you can switch parking line onoff
Mutinguge Seectin
language Chinese, English, Italian,
Spanish, Portuguese,apanese, ect
2. Fix the screws and let the U brack tight(see below pictures).
3. Move the monitor to the desired location then fix screws on the bottom of the
bracket(see below pictures).
5 Digital LCD Monitor
Connection cable
Accessories
Instruction Manual Packing Box
①② ③
1. Fix the monitor and suction cup
2. Lower the joystick while firmly pressing the suction plate against the parts to be connected to a flat
surface, such as the windshieldinstrument panel. (hen removing it, just lift the lever to remove it
easily.)
3. Rotate the screw to adjust the height of the monitor in an easy-to-observe manner.
Insttin Lctin Reerence
Because of the monitor bracket, it is difficult to fix it if
the dashboard is not flat,we recommend to install it
on the windshield.
The Screen Prrtin Adjustment
16 43
It have two type of screen proportion, one for 16, one for 43, you can choose the type you like,
enter the menu to adjust.
Also, you can switch
parking line on/o
3. PARKING LINE SELECTION
2
MONITOR INSTALLATIONOPTIONAL
7 Digital LCD Monitor
Connection cable
Accessories
Instruction Manual Packing Box
PACAGE CONTENTS LIST
1. Prepare all the parts of the kit before installation.
Mnitr Inst ste
MONITOR INSTALLATION
1NORMAL/MIRROR LIP
PARING LINE SELECTION
2VERTICAL LIPPING
4
3
2
For the function of image flip, you can adjust through the menu, or press the sixth button to choose
the mode you need
Also, you can switch parking line onoff
Mutinguge Seectin
language Chinese, English, Italian,
Spanish, Portuguese,apanese, ect
2. Fix the screws and let the U brack tight(see below pictures).
3. Move the monitor to the desired location then fix screws on the bottom of the
bracket(see below pictures).
5 Digital LCD Monitor
Connection cable
Accessories
Instruction Manual Packing Box
①② ③
1. Fix the monitor and suction cup
2. Lower the joystick while firmly pressing the suction plate against the parts to be connected to a flat
surface, such as the windshieldinstrument panel. (hen removing it, just lift the lever to remove it
easily.)
3. Rotate the screw to adjust the height of the monitor in an easy-to-observe manner.
Insttin Lctin Reerence
Because of the monitor bracket, it is difficult to fix it if
the dashboard is not flat,we recommend to install it
on the windshield.
The Screen Prrtin Adjustment
16 43
It have two type of screen proportion, one for 16, one for 43, you can choose the type you like,
enter the menu to adjust.
Chinese, English, Italian,
Spanish, Portuguese,
Japanese ect.
Multi-language Selection
2
MONITOR INSTALLATIONOPTIONAL
7 Digital LCD Monitor
Connection cable
Accessories
Instruction Manual Packing Box
PACAGE CONTENTS LIST
1. Prepare all the parts of the kit before installation.
Mnitr Inst ste
MONITOR INSTALLATION
1NORMAL/MIRROR LIP
PARING LINE SELECTION
2VERTICAL LIPPING
4
3
2
For the function of image flip, you can adjust through the menu, or press the sixth button to choose
the mode you need
Also, you can switch parking line onoff
Mutinguge Seectin
language
Chinese, English, Italian,
Spanish, Portuguese,apanese, ect
2. Fix the screws and let the U brack tight(see below pictures).
3. Move the monitor to the desired location then fix screws on the bottom of the
bracket(see below pictures).
5 Digital LCD Monitor
Connection cable
Accessories
Instruction Manual Packing Box
①② ③
1. Fix the monitor and suction cup
2. Lower the joystick while firmly pressing the suction plate against the parts to be connected to a flat
surface, such as the windshieldinstrument panel. (hen removing it, just lift the lever to remove it
easily.)
3. Rotate the screw to adjust the height of the monitor in an easy-to-observe manner.
Insttin Lctin Reerence
Because of the monitor bracket, it is difficult to fix it if
the dashboard is not flat,we recommend to install it
on the windshield.
The Screen Prrtin Adjustment
16 43
It have two type of screen proportion, one for 16, one for 43, you can choose the type you like,
enter the menu to adjust.
It have two type of screen
proportion, one for 16:9,
one for 4:3, you can choose
the type you like, enter the
menu to adjust.
The Screen Proportion Adjustment
2
MONITOR INSTALLATIONOPTIONAL
7 Digital LCD Monitor
Connection cable
Accessories
Instruction Manual Packing Box
PACAGE CONTENTS LIST
1. Prepare all the parts of the kit before installation.
Mnitr Inst ste
MONITOR INSTALLATION
1NORMAL/MIRROR LIP
PARING LINE SELECTION
2VERTICAL LIPPING
4
3
2
For the function of image flip, you can adjust through the menu, or press the sixth button to choose
the mode you need
Also, you can switch parking line onoff
Mutinguge Seectin
language Chinese, English, Italian,
Spanish, Portuguese,apanese, ect
2. Fix the screws and let the U brack tight(see below pictures).
3. Move the monitor to the desired location then fix screws on the bottom of the
bracket(see below pictures).
5 Digital LCD Monitor
Connection cable
Accessories
Instruction Manual Packing Box
①② ③
1. Fix the monitor and suction cup
2. Lower the joystick while firmly pressing the suction plate against the parts to be connected to a flat
surface, such as the windshieldinstrument panel. (hen removing it, just lift the lever to remove it
easily.)
3. Rotate the screw to adjust the height of the monitor in an easy-to-observe manner.
Insttin Lctin Reerence
Because of the monitor bracket, it is difficult to fix it if
the dashboard is not flat,we recommend to install it
on the windshield.
The Screen Prrtin Adjustment
16 43
It have two type of screen proportion, one for 16, one for 43, you can choose the type you like,
enter the menu to adjust.
EN

MONITOR INSTALLATION
CONNECTION DIAGRAM
PAL/NTSC Switch
Brightness Adjustment
For TV system, it have PAL,
NTSC, or auto, you can
choose the suitable system
Trigger wire
Monitor RVM 7.1
Monitor RVM 5.1
12 - 24V
GND
RED (TO ACC +12V)
BLACK (TO GROUND)
For the brightness, it have 5 modes, it have standard mode, soft mode, vivid
mode and light mode, press the seventh button on the monitor, you can adjust
the brightness according you need
IMPORTANT NOTES
1.The rear(front) view camera functions technically as a driver assistance
device, which cannot be taken as substitute for driver’s responsibility
when operating the vehicle.
2.To keep the camera working properly, please clean the camera regularly
to free it from dirt, water drops, snowdrops,etc.
3.Although the camera is designed to be waterproof, please do NOT use
high-pressure water jet to wash the camera as this may break the glass
lens.
4.Keep the cables of the camera away from high temperature objects such
as engine or exhaust.
5.If the camera model you have comes without in-built LED lights, please
turn on your license plate light for better vision at night or in dark areas.
6.The camera are applicable to vehicles with DC 12V power output(10%
higher or lower allowed), please do NOT use it on vehicles with DC 24V
or other power output out of this range, otherwise it is very likely to get
burned.
7.The specifications of the camera are subject to change without prior
notice.
5
CONNECTION DIAGRAM
GND
Trigger wire
12 - 24V
Brightness Adjustment
PAL/NTSC Switch
PAL NTSC
For TV system, it have PAL, NTSC,or auto, you can choose the suitable system
For the brightness, it have 5 modes, it have standard mode, soft mode, vivid mode and light
mode, press the seventh button on the monitor, you can adjust the brightness according you need
Monitor
Before operating the monitor, please read this manual thoroughly
and retain it for future reference.
1
Ver 1.0
USER MANUAL
DIGITAL LCD MONITOR
Monitor
V1
V2
Fuse
RED(TO ACC +12V)
BLACK(TO GROUND)
IMPORTANT NOTES
1.The rear(front) view camera functions technically as a driver assistance
device, which cannot be taken as substitute for driver’s responsibility
when operating the vehicle.
2.To keep the camera working properly, please clean the camera regularly
to free it from dirt, water drops, snowdrops,etc.
3.Although the camera is designed to be waterproof, please do NOT use
high-pressure water jet to wash the camera as this may break the glass
lens.
4.Keep the cables of the camera away from high temperature objects such
as engine or exhaust.
5.If the camera model you have comes without in-built LED lights, please
turn on your license plate light for better vision at night or in dark areas.
6.The camera are applicable to vehicles with DC 12V power output(10%
higher or lower allowed), please do NOT use it on vehicles with DC 24V
or other power output out of this range, otherwise it is very likely to get
burned.
7.The specifications of the camera are subject to change without prior
notice.
5
CONNECTION DIAGRAM
GND
Trigger wire
12 - 24V
Brightness Adjustment
PAL/NTSC Switch
PAL NTSC
For TV system, it have PAL, NTSC,or auto, you can choose the suitable system
For the brightness, it have 5 modes, it have standard mode, soft mode, vivid mode and light
mode, press the seventh button on the monitor, you can adjust the brightness according you need
Monitor
Before operating the monitor, please read this manual thoroughly
and retain it for future reference.
1
Ver 1.0
USER MANUAL
DIGITAL LCD MONITOR
Monitor
V1
V2
Fuse
RED(TO ACC +12V)
BLACK(TO GROUND)
IMPORTANT NOTES
1.The rear(front) view camera functions technically as a driver assistance
device, which cannot be taken as substitute for driver’s responsibility
when operating the vehicle.
2.To keep the camera working properly, please clean the camera regularly
to free it from dirt, water drops, snowdrops,etc.
3.Although the camera is designed to be waterproof, please do NOT use
high-pressure water jet to wash the camera as this may break the glass
lens.
4.Keep the cables of the camera away from high temperature objects such
as engine or exhaust.
5.If the camera model you have comes without in-built LED lights, please
turn on your license plate light for better vision at night or in dark areas.
6.The camera are applicable to vehicles with DC 12V power output(10%
higher or lower allowed), please do NOT use it on vehicles with DC 24V
or other power output out of this range, otherwise it is very likely to get
burned.
7.The specifications of the camera are subject to change without prior
notice.
5
CONNECTION DIAGRAM
GND
Trigger wire
12 - 24V
Brightness Adjustment
PAL/NTSC Switch
PAL NTSC
For TV system, it have PAL, NTSC,or auto, you can choose the suitable system
For the brightness, it have 5 modes, it have standard mode, soft mode, vivid mode and light
mode, press the seventh button on the monitor, you can adjust the brightness according you need
Monitor
Before operating the monitor, please read this manual thoroughly
and retain it for future reference.
1
Ver 1.0
USER MANUAL
DIGITAL LCD MONITOR
Monitor
V1
V2
Fuse
RED(TO ACC +12V)
BLACK(TO GROUND)
Fuse