Blaupunkt CEBP870 User manual

7-BAND EQUALIZER

1. Select the desired location to mount the unit under the dashboard.
2. Drill (4) 4.2mm diameter holes. Fix the mounting bracket under the dash or in
the rear of the car with (4) 4x14mm tapping screw. Be careful when drilling to
avoid damaging existing wiring under the dashboard.
3. Mount the unit to the mounting bracket with (4) 3x10mm machine screw.

Adjusts the output level of subwoofer
Adjust the output level of the volume
Switch between the AUX or MAIN inputs
Switch between the MPT or second source inputs
Adjust the volume of the 4 front and rear speakers
Control the frequency response of the Booster or cut with the four
tone controls each 50,125, 315,750,2.2K, 6K, 16KHz.
Select Low Pass frequency: 60Hz or 90Hz
1. When a radio, cassette, or CD player is connected to this unit and is turned
on, the unit will turn on.
2. Use the fader controls to adjust the sound balance between the front and
rear speakers.
3. Rotate the equalizer controls to achieve the desired sound quality.
4. Use the subwooder output level control on the front panel to adjust the
sound levels of the subwoofer.