Blaupunkt SB200BT User manual

2.1 CH TV Soundbase with Bluetooth/FM/USB
2.1 kanałowy zestaw głośnikowy z Bluetooth, USB i radiem FM
2.1K TV Soundbase s funkcí Bluetooth/FM/USB
2.1-kanálová televízna zvuková základňa s funkciou Bluetooth,
FM rádiom a USB pripojením
2.1 csatornás TV Soundbase hangprojektor Bluetooth/FM/USB funkcióval
User's manual
Instrukcja użytkownika
Návod k obsluze
Návod na použitie
Használati útmutató
SB200BT

SB200BT
IMPORTANT SAFETY INSTRUCTIONS
Caution:
To reduce the risk of electric shock, do not dismantle the product and do not
expose the apparatus to rain or moisture. No user-serviceable parts inside.
Refer servicing to qualified personnel only.
Explanation of Graphical Symbols:
To achieve the utmost in enjoyment and performance, and in order to become
familiar with its features, please read this manual carefully before attempting
to operate this product. This will assure you years of trouble free performance
and listening pleasure.
Important Notes
This safety and operating instruction should be retained for future
reference.
The apparatus should not be exposed to dripping or splashing or placed
in a humid atmosphere such as a bathroom.
Do not install the product in the following areas:
Places exposed to direct sunlight or close to radiators.
On top of other stereo equipment that radiate too much heat.
Blocking ventilation or in a dusty area.
Areas where there is constant vibration.
Humid or moist places.
Do not place near candles or other naked flames.
Operate the product only as instructed in this manual.
Before turning on the power for the first time, make sure the power
adaptor is properly connected.
The lightning flash within an equilateral triangle is intended to alert
you to the presence of uninsulated dangerous voltage within the
product's enclosure that may be of sufficient magnitude to
constitute an electric shock to a person or persons.
The exclamation point within an equilateral triangle is intended to
alert you to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the product.
1

For safety reasons, do not remove any covers or attempt to gain access to the
inside of the product. Refer any servicing to qualified personnel.
Do not attempt to remove any screws, or open the casing of the unit; there are
no user serviceable parts inside. Refer all servicing to qualified service
personnel.
SAFETY INSTRUCTIONS
1. Read Instructions - All the safety and operating instructions must be read
before the product is operated.
2. Retain Instructions - The safety and operating instructions should be kept
with the product for future reference.
3. Heed warnings - All warnings on the product and in the operating
instructions should be adhered to.
4. Follow instructions - All operating and users’ instructions should be
followed.
5. Installation - Install in accordance with the manufacturer's instructions.
6. Power sources - This product should be operated only from the type of
power source indicated by the marking adjacent to the power cord entry. If
you are not sure of the type of power supply to your home, consult your
product dealer or local power company.
7. Grounding or polarization - the product is not required to be grounded.
Ensure that the plug is fully inserted into the wall outlet or extension cord
receptacle to prevent blade or pin exposure. Some versions of the product are
equipped with a power cord fitted with a polarized alternating line plug (a
plug having one blade wider than the other). This plug will fit onto the power
outlet only one way. This is a safety feature. If you are unable to insert the plug
fully into the outlet, try reversing the plug. If the plug should still fail to fit,
contact your electrician to replace your obsolete outlet. Do not defeat the
safety purpose of the polarized plug. When using an extension power-supply
cord or a power-supply cord other than that supplied with the appliance, it
should be fitted with the appropriate molded plugs and carry safety approval
appropriate to the country of use.
8. Power cord protection - Power-supply cords should be routed so that they
are not likely to be walked on, kinked or pinched by items placed on or against
them, paying particular attention to cords from plugs, receptacles and the
point where they exit from the product.
9. Overloading - Do not overload wall outlets, extension cords, or multiple
sockets, as this can result in a risk of fire or electric shock.
10. Ventilation - The product must be properly ventilated. Do not place the
product on a bed, sofa, or other similar surface. Do not cover the product with
any items such as tablecloths, newspapers, etc.
2
SB200BT

11. Heat - The product should be situated away from heat sources such as
radiators, heat registers, stoves, or other products, including amplifiers that
produce heat. No naked flame sources, such as lighted candles, should be
placed on the apparatus.
12. Water and moisture - To reduce the risk of fire or electric shock, do not
expose the product to train, dripping, splashing or excessive moisture such as
in a sauna or bathroom. Do not use this product near water, for example, near a
bathtub, washbowl, kitchen sink, laundry tub, in a wet basement or near a
swimming pool (or similar).
13. Object and Liquid Entry - Never push objects of any kind into this product
through openings, as they may touch dangerous voltage points or short-
circuit parts that could result in a fire or electric shock. Never spill liquid of any
kind on the product. Do not place any object containing liquid on top of the
product.
14. Cleaning - Unplug the product from the wall outlet before cleaning. Dust
in the woofer may be cleaned with a dry cloth. If you wish to use an aerosol
cleaning spray, do not spray directly on the cabinet; spray onto the cloth. Be
careful not to damage the drive units.
15. Attachments - Do not use attachments not recommended by the product
manufacturer, as they may cause hazards.
16. Accessories - Do not place this product on an unstable cart, stand, tripod,
bracket or table. The product may fall, causing serious injury to a child or adult,
and serious damage to the product. Use only with a cart, stand, tripod, bracket
or table recommended by the manufacturer or sold with the product. Any
mounting of the product should follow the manufacturer’s instructions and
should use a mounting accessory recommended by the manufacturer.
17. Moving the product - A product and cart combination should be moved
with care. Quick stops, excessive force and uneven surfaces may cause the
product and cart combination to overturn.
18. Unused periods - The power cord of the appliance should be unplugged
from the outlet during lightning storms or when the apparatus is left unused
for a long period of time.
19. Servicing - Do not attempt to service this product yourself, as opening or
removing covers may expose you to dangerous voltage or other hazards. Refer
all servicing to qualified service personnel.
20. Please remove the power plug form the main power source or wall power
source when not in use. When plugged in to a power source, the system is in
standby mode, so the power is not entirely cut off.
21. Replacement parts - When replacement parts are required, ensure that
the service technician has used replacement parts specified by the
manufacturer or have the same characteristics as the original part.
SB200BT
3

SB200BT
Unauthorized substitutions may result in fire, electric shock or other hazards.
22. Mains fuses - For continued protection against fire hazard, use fuses only
of the correct type and rating. The correct fuse specification for each voltage
range is marked on the product.
23. Do not turn up the volume while listening to a section with very low level
inputs or no audio signals. If you do, the speaker may be damaged when a peak
level section is suddenly played.
24. The only means of completely disconnecting the product from the power
supply is by removing the power cord from the wall outlet or the product. The
wall outlet or the power cord entry to the product must remain freely
accessible at all times while the product is in use.
25. Try to install the product near a wall socket or extension cord and shall be
easily accessible.
26. The highest environmental temperature suitable for this product is 35°C.
27. ESD hints - The normal function of the product may be disturbed by strong
Electro-Magnetic Interference. If so, simply reset the product to resume
normal operation by following the instruction manual. In case the function
could not resume, please use the product in other location.
28. Battery
1). The batteries must not be exposed to excessive heat such as sunshine, fire
or the like.
2). The batteries should be drawn to the environmental aspects of battery
disposal.
3). Battery usage CAUTION-to prevent battery leakage which may result in
body injuries, property damage, or damage to the apparatus:
- Install all batteries correctly, + and – as marked on the apparatus.
- Do not mix batteries (old and new or carbon and alkaline, etc.)
- Remove batteries when the unit is not used for a long time.
ERP2 - (Energy Related Products) note
This product with ECO design complies with the stage 2 requirement of
Commission Regulation ( EC) NO. 1275/2008 implementing Directive
2009/125/EC regard to standby and off mode electric power consumption of
electronic household and office equipment. After 60 minutes without any
audio input, the device will automatically switch into standby mode.
Important note:
Please note that low volume setting in the audio source maybe recognized as
“no audio signal”. This will affect the capability of signal detection from the
device and can also originate an automatic switch into standby mode. If this
4

SB200BT
happens please reactivate the audio signal transmission or increase the
volume setting on the audio source player ( mp3 player etc.), in order to
resume playback , please contact the local service center if the problem
remains.
The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc. and any use of such marks by us is under license. Other
trademarks and trade names are those of their respective owners.
Warning
This appliance is not intended for use by persons (including children) with
reduced physical sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the
appliance.
1. To prevent possible hearing damage, do not listen at high volume levels for
long time periods respectively a sudden high volume level.
2. Never use the device unsupervised! Switch off the device whenever you are
not using it, even if this only for a short while.
3. The appliance is not intended to be operated by means of an external timer
or separate remote control system.
4. If the supply cord is damaged, it must be replaced by the manufacturer, its
service agent or similarly qualified persons in order to avoid a hazard.
5. Before operating this system, check the voltage of this system to see if it is
identical to the voltage of your local power supply.
6. The unit should not be impeded by covering the ventilation opening with
items such as newspaper, table-cloths, curtains etc. Make sure that there are at
least 20 cm of space above and at least 5 cm of space on each side of the unit.
7. The apparatus must not be exposed to dripping or splashing and that
objects filled with liquids, such as vases, must not be placed on the apparatus.
5

8. To prevent fire or shock hazard, do not expose this equipment to hot places,
rain, moisture or dust.
9. Do not locate this unit near any water sources e.g. taps, bathtubs, washing
machines or swimming pools. Ensure that you place the unit on a dry, stable
surface.
10. Do not place this unit close to a strong magnetic field.
11. Do not place the unit on a amplifier or receiver.
12. Do not place this unit in a damp area as the moisture will affect the life of
electric components.
13. If the system is brought directly from a cold to a warm location, or is placed
in a very damp room, moisture may condense on the lens inside the player. If
this occurs, the system will not operate properly. Please leave the system
turned on for about an hour until the moisture evaporates.
14. Do not attempt to clean the unit with chemical solvents as this might
damage the finish. Wipe with a clean, dry or slightly damp cloth.
15. When removing the power plug from the wall outlet, always pull directly on
the plug, never pull on the cord.
16. The mains plug is used as the disconnect device, the disconnect device
must remain readily operable.
NOTICE
This product complies with the radio interference requirements of the
European community.
Your products is designed an manufactured with high quality materials and
components, which can be recycled and reused.
When this crossed-out wheeled bin symbol is attached to a product it means
that the product is covered by the European Directive 2002/96/EC. Please
inform yourself about the local separate collection system for electrical and
SB200BT
6

SB200BT
electronic products. Please cat according to your local rules and do not
dispose of your old products with your normal household waste. Correct
disposal of your old product helps to prevent potential negative
consequences for the environment and human health.
Your product contains batteries covered by the European Directive
2006/66/EC, which cannot be dispose with normal household waste. Please
inform yourself about the local rules on separate collection of batteries
because correct disposal helps to prevent negative consequences for the
environmental and human health.
Environmental information
All unnecessary packaging has been omitted. We have tried to make the
packaging easy to separate into three materials: cardboard(box), polystyrene
foam(buffer) and poly ethylene (bags, protective foam sheet). Your system
consists of material which can be recycled and reused if disassembled by a
specialized company. Please observe the local regulations regarding the
disposal of packaging materials, exhausted batteries and old equipment.
Recording and playback of material might require consent. See Copyright Act
1956 and The Performer's Protection Acts 1958 to 1972.
7

SB200BT
IDENTIFYING THE PARTS
Top view
1. Power button
Switch the unit between ON and standby mode
2. Source button
Press to switch the play source between
Bluetooth/FM/USB/Optical/Coaxial/AUX(R/L)/Line in.
On display:
” bT”=Bluetooth.
“USB”= USB playback mode.
“frequency”= FM radio mode.
“OPTI”=optical input mode.
“COAX”= Coaxial input mode.
“AUX”= AUX IN (Right and left channel, RCA input mode).
“LINE”= LINE IN input mode (MP3 Link mode).
3. Previous and next button
• Press to select next and previous track in Bluetooth and USB playback mode.
• Short press to pick up the FM preset station.
• Press for 2 seconds to auto scan the FM station in upward or downward
frequency.
4. VOL+/VOL-
Press to adjust the volume output level.
5. USB port
USB port use for playback and charging connection.
8
1 2 345

SB200BT
Front view
6. Standby LED indicator.
7. Remote control sensor.
8. LED display.
Rear view
9. Line in jack.
10. AUX IN (L/R channel) socket.
11. COAXIAL socket.
12. Optical socket.
13. FM wire antenna.
14. AC power cord.
9
678
LINK IN
COAXIAL
OPTICAL
R-AUX IN -L
910
11 12
13 14

SB200BT
Remote control and general operation
1. Power button for unit power on
and standby.
2. LED indicator for remote control
operation.
3. Learning function key zone.
4. VOL+/- button for output volume
adjustment.
5. MUTE button for sound output
control.
6. Play/pause button.
7. PREVIOUS AND NEXT button.
8. Sound equalizer control button
(Normal, MUSIC and NEWS)
9. USB button for USB playback mode.
10. BT/PAIR button
Short press it to enter Bluetooth
playback mode.
Press and hold it for 2 seconds can
make Bluetooth pairing quit from
current Bluetooth device.
11. FM/SCAN
Short press it to enter FM radio mode.
Press and hold it for 2 seconds can auto
scan and preset the available FM station.
12. OPTI/COAXIAL/LINE/AUX
button for optical, coaxial, line in
(Mp3 link) and AUX IN(left and right
channel, RCA) audio input mode.
TV
LEARN
SOURCE
- - - -
0
- - - -
123
456
789
FOR CH+/- UP/DOWN ETC.
VOL- VOL +
MUSIC NEWS
MUTE
NORMAL
BT/PAIR USB FM/SCAN
OPTI
COAX AUX
SB200BT
LINE
ADDITIONAL LEARNING KEYS
5
4
2
3
7
1
6
8
9
10 11
12
10

SB200BT
Battery installation for remote control
1. Remove the battery compartment cover.
2. Insert two “AAA” size (R03 or UM-4) dry batteries. Make sure that the
batteries are inserted according to the relative polarity (+/-) symbol inside of
the battery compartment.
3. Close the battery cover.
Precautions Concerning Batteries
• Be sure to insert the batteries with correct positive “+ ” and negative “- ”
polarities.
• Use batteries of the same type. Never use different types of batteries
together.
• Either rechargeable or non-rechargeable batteries can be used. Refer to the
precautions on their labels.
• If the remote control is not to be used for a long time (more than a month),
remove the batteries to prevent from leaking.
• If the batteries leak, wipe away the leakage inside the battery compartment
with a paper towel and replace the batteries with new ones.
• Do not use any batteries other than those specified. Do not mix new batteries
with old ones.
• Do not heat or disassemble batteries. Never throw them in fire or water.
• Do not carry or store batteries with other metallic objects. Doing so could
cause batteries to short circuit, leak or explode.
• Never recharge a battery unless it is confirmed to be a rechargeable type.
Remote control working range:
The remote control sensor was built up in the front of display. The best
11

SB200BT
working distance is within 6 meters with 60 degree operation angle showed as
below:
Program smart remote control to control TV( learning operation):
This remote control includes several learning function keys for TV. This feature
allows you to use one remote control for TV and for Soundbase operation.
Please refer to below steps for learning operation.
a. Press and hold the and key 3 seconds at same time to enter the
learning function mode. In this mode, the red LED indicator will light on
eternally.
b. Place the remote control aim to the TV's remote control sensor within 50mm
distance as below drawing. Please kindly note that both remote control's
sensors shall aim together within 50mm distance in order to get reception.
B
A
c. Press one learning function key which you desire to learn the TV's function.
Meanwhile, the red LED indicator will start to flash slowly if your operation is
successful.
d. Press one relative functional key on TV's remote control which you desire to
be learned. The red LED indicators will quick flare 3 times if the function was
12
TV
LEARN
SOURCE
- - - -
0
- - - -
123
456
789
FOR CH+/- UP/DOWN ETC.
VOL- VOL +
MUSIC NEWS
MUTE
NORMAL
BT/PAIR USB FM/SCAN
OPTI
COAX AUX
SB200BT
LINE
ADDITIONAL LEARNING KEYS
TV remote control
SB200BT remote control

SB200BT
learned successfully.(For example, if you want to learn the TV power on/off
function in the sound board's remote control, you need to press one learning
key from the soundbase's remote control first, and then press the power on/off
key from TV's remote control).
e. Repeat steps c and d for other learning operation functions.
f. Press any other key which is not included in the learnable keys area. The
remote control will exit from the learning mode, and the red LED indicator will
turn off. Then you can use the remote control for TV and for soundbase's
operation.
Learning functions DIY (Do it yourself):
a. The functional printing for the learnable button is only for your reference.
These learnable keys are open to learn all functions of TV. For example, you can
use numerical buttons to learn CH up/down function of TV etc.
b. There are provided 4 additional keys which can be used for learning TV
functions like CH +/-, UP/DOWN, ENTER etc. You can learn and define freely the
functional control keys according to your TV's operation.
c. If one of the learning functions is not working properly, please repeat steps a
to f.
Audio connection and setting
Before power on the unit, please kindly connect the unit first. The sounbase
has included digital ( optical& coaxial) and analogue ( AUX IN and LINE IN)
inputs for different source. You can reference below instruction for the
connection in case of what device you have.
1. Soundbase connect with optical/Coaxial output of your TV.
Remove the protective cap of the OPTICAL socket, and then using an OPTICAL
cable (not included) to connect between the TV's OPTICAL OUT jack and the
OPTICAL input jack of soundbase, the coaxial input connection is same.
Press the “OPTI” or “ COAX” button on remote control or button on top panel
can switch the unit to optical or coaxial mode for the sound out and playing.
13
OPTICAL cable(not included)
LINE IN
COAXIAL
OPTICAL
R-AUX IN -L
OPTICAL
COAXIAL
COAXIAL cable(not included)
(connectors on rear panel of SB200T)

SB200BT
Note:
1. If there is no sound come out of the soundbase. Make sure the audio setting
of your source player (e.g. DVD player, game player, TV) is set to PCM with
digital output. Please reference your TV or player manual for this operation.
2. The output sound of Coaxial and Optical mode may louder than AUX IN etc
which is normal, because the digital audio signal input and output level is
different on audio source player( like DVD player, TV etc).
2. Soundbase connect with TV set-top box.
In case of output jack of your TV set-top box has, you can follow up below
drawing and select AUX IN/optical/Coaxial connection with soundbase.
3. Soundbase connect with DVD player or Blue-ray DVD player.
In case of output jack of your DVD player or Blue-ray DVD player has, you can
follow up below drawing and select AUX IN/optical/Coaxial/LINE IN
connection with soundbase.
14
LINE IN
COAXIAL
OPTICAL
R-AUX IN -L
COAXIAL cable(not included)
Set-top Box
RCA to RCA audio cable
(included)
OPTICAL COAXIAL
OPTICAL cable(not included)
DVD Player
LINE IN
COAXIAL
OPTICAL
R-AUX IN -L
COAXIAL cable(not included)
RCA to RCA audio cable
(included)
OPTICAL COAXIAL
OPTICAL cable(not included)
(connectors on rear panel of SB200T)
(connectors on rear panel of SB200T)

SB200BT
4. Soundbase connect with MP3 player.
The soundbase has included one MP3 Link jack (LINE IN) which is able to
connect with any other MP3 player device. Please reference below drawing for
the connection and playing.
Power setting
Connect the AC power cord to wall socket, and the standby red color LED
indicator will light up after successful connection.
Caution:
- Risk of product damage! Ensure that the power supply voltage corresponds
to the voltage printed on the rating label on the back or on the underside of
the unit.
- Before connecting the AC power cord, ensure that you have completed all
other connection.
- Be sure to unplug the power cord from the outlet when the system is not in
use for an extended period of time.
Bluetooth operation
The unit includes Bluetooth function which allows you to audio streaming
playback the music from your Bluetooth device.
1. Short press the BT button on remote control or button on top panel
enter to Bluetooth mode till the “ bT” show on display; The blue color display
will flare which mean the unit is ready to pair, also a notice sound will come out
from speaker at same time.
2. Activate the Bluetooth function on your Bluetooth device like smart phone
etc (please reference your Bluetooth device manual for this operation) and
search the available Bluetooth device.
15
LINE IN
COAXIAL
OPTICAL
R-AUX IN -L
Phone Media player
3.5mm to 3.5mm audio cable
(not included)
LINE IN
COAXIAL
OPTICAL
R-AUX IN -L
(connectors on rear panel of SB200T)

SB200BT
3. Check the Bluetooth menu list on your device, and select “ BLAUPUNKT
SB200BT” for pairing; The blue color display will stop flare after pairing
successfully, also another notice sound will come out from speaker at same
time which means the paring is successful.
4. Select and play the music from your Bluetooth device, then the audio can
wireless playback from the unit.
5. In Bluetooth mode, you can press the PREVIOUS or NEXT button to select the
play track; and press the PLAY /PAUSE button for music play/pause control;
press the VOLUME+/–button to adjust the volume.
Note:
a. Please input “ 0000” in case of a POP password required in your Bluetooth
device during pairing.
b. Please kindly notes not all Bluetooth devices are guaranteed to be pairing
successfully due to different brand and design.
c. The best working distance of Bluetooth is within 10 meters without any
obstacle far away from the unit. Please make sure your Bluetooth device is in
this distance.
d. In Bluetooth mode, press and hold PAIR button on remote control in two
seconds can quit the Bluetooth current pairing, and the unit will start to pair
with other device. The LED display will flare again. Please re-pair the unit for
playback.
FM radio operation
Before start the FM radio tuning, please fully extend and adjust the position of
the FM wire antenna and try to move the radio next to the window for better
signal reception.
1. Enter FM radio mode
Short press the FM button on remote control or button can enter to FM
radio mode; and the FM frequency will show on display.
2. Radio scan
Press and hold PREVIOUS or NEXT button for two seconds can auto scan the
available FM station in upward or downward frequency and auto play the
available FM radio.
3. Auto scan and preset operation.
In radio mode, press and hold SCAN button for two seconds on remote control
can full scan and save the available radio station automatically. The unit can
save up to 40 stations.
To pick up the preset FM station, please short press the “ PREVIOUS” and NEXT
button on remote control or top panel.
16

SB200BT
USB playback
The unit is able to decode and playback all MP3 music files which stored in USB
sticker.
1. Before start the USB playback, please copy the available MP3 music files to
your USB device.
2. Plug the USB sticker into the USB port, press the USB button on remote
control or button switch into USB playback mode; the unit will
automatically start readout the MP3 files from device, and play the music.
3. During playing, you can short press PREVIOUS//NEXT/PLAY/PAUSE button to
get the relative function. Press hold and release PREVIOUS ( ) or NEXT( )
button can get the fast-forward or fast-rewind function in playing.
Notes:
1. Before connecting the USB media to the unit; please make sure the port is in
correct direction and well connected.
2. All USB stickers for playback function are not guaranteed due to different
design and brand.
3. An extension cable for USB connection and playing is not recommended,
which may cause intermittent sound output due to signal loss during the data
transportation.
4. The unit only can support till 32 GB max storage device.
LINE IN (MP3 LINK)
The unit includes a LINE IN jack which allow you to playback the music from
outsourcing player( like MP3 player etc) by a 3.5mm to 3.5mm stereo audio
cable connection. You can select and play the music from your player, and get
the sound output from the soundbase.
Press the LINE button on remote control or button on top panel can switch
the unit to LINE IN mode. In LINE IN playback mode, the main control is from
your player device. The soundbase only can have volume adjustment, mute
function.
USB Charging
The unit includes USB charging output port (1 x 5V/500A) which allow you to
connect and provide power for other device like USB type lamp, fan or smart
phone etc.
Before connect the USB charging port, please check the required power spec
on your device, and use your device supplied USB cable (not included) for
17

SB200BT
connection. A charging symbol or function indicator will light up on your
device after the charging connection successfully.
Remark:
a. The charging functions for all phones or electronic devices are not
guaranteed on this unit.
b. Please always check the required charging rating spec on your device first,
and connect with the USB port from this unit for charging.
c. Please always use your device supplied USB cable for charging connection.
d. The charging time of your device is not guarantee due to not supplied rating
charging USB power source for your device.
Specifications
General
Power requirements: AC100-240V~ 50/60Hz
Power consumption (on mode): 19 Watt
Standby power consumption :< 0.5 Watt
Output power RMS: 80 Watt (20W x 2 + 40W subwoofer)
Total harmonic distortion: <1% (1 kHz, 1W)
Audio input sensitivity: 500mV
Frequency response: 40Hz – 20 KHz
USB charging rating output: 5V/500mA
USB support device: up to 32GB max.
Main unit dimensions: 720 x 51 x 330 mm (W x H x D)
Speakers
Front impedance: 8Ω x 2
Woofer impedance: 4Ω
Bluetooth
Bluetooth version: V3.0
Work range: approx.10 meters
Transmission frequency: 2.402~2.480GHz
Protocols: A2DP/AVRCP
(Notes: the product spec may change without prior notice).
Accessories
Remote Control x 1pcs
Remote control battery x 1 pair
Instruction Manual x 1pcs
Warranty card x 1 pcs
RCA cable (White & Red) x 1pcs
18