Blaze B.One User manual

B.One Hub
Quick-Start Guide
All Things. Be One M

One App + One Hub
All Things. Be One
B.One allows you to control latest smart devices like
motion sensors, security cameras, smoke detectors,
energy meters, climate control and also legacy
devices like old televisions or music systems using a
simple and intuitive application or by voice
commands. B.One Hub and B.One App is all you
need to setup your smart home. You can now
control and manage most of your devices from
anywhere in the world using B.One App.
Making your home safer, smarter
and convenient has never been
simpler. With the B.One Hub. You
can control the entire home from
anywhere. Make sure your
morning coffee is ready by the
time you wake up, play music
from your fingertips and
customize your lifestyle.
App
The Hub acts as the key point
from where all the data flows to
your App. The Hub connects to
the App and notifies you about
the status, actions and other
important alerts to your Smart-
phone/Tablet.
Hub
Customizing the B.One Hub is
entirely up to you. Select the
devices you want to pair and
connect/control them through
the App.
Devices

What’s Included ?
1. Hub 2. Adapter
(100~240V)
4. Screwdriver 5. Wipe Cloth
3. USB Cable
Setup Requirements
Wi-Fi Network with Internet Access (2.4 GHz
only)
Power Supply (100~240V)

Download and Install the B.One Application
on your compatible Tablet/ Mobile device
from the App Store / Play Store.
B.One App is compatible with: iOS 8 and
above, Android OS version 5.0 and above.
Open the B.One Application and follow the
setup instructions.
Getting Started
Step 1: Download B.One App
Free App Available

Connect Hub- B.One hub works on Wi-Fi(2.4
GHz) technology and can be placed anywhere in
the house as long as it is within 30 feet of your
home router. Once plugged in please look for
B.One logo on top to turn solid red.
Step 3: Power Connection
Step 2: Power ON
Adapter
USB Cable
Use slide switch to turn ON your B.One Hub.
OFF ON

Open Application and follow online steps to
finish setting up your B.One Hub.
Step 4: Follow B.One App Setup
Process

During the course of operating your B.One
Hub, if you make an error and would like to
restart your Hub, simply pull the charger
out, plug it back in and unplug it within 2
seconds and then plug it back in. This would
restart your Hub.
Troubleshooting
Technical Specifications
AC/DC Adapter:
Input: 100 ~ 240V, 50/60Hz, 0.25A Max
Output: 5V, 1.2A
Battery Backup up to 16 hours
Ambient Temp. Range: -10Oc to +85Oc
For a list of compatible products, please
visit the ‘Syncs With’TM section of the
website: http://www.b1hub.com
USB Cable

Protocols Supported
B.One Elite HUB supports:
Wi-Fi(2.4 GHz), ZIGBEE, Z-Wave Plus, IR,
Bluetooth Smart.
B.One HUB supports:
Wi-Fi(2.4 GHz), Z-Wave Plus, IR.
The B.One logo on the Hub indicates to you
the current status of the Hub.
For any further technical support please contact:
[email protected]
B.One Hub Status Indicator
COLOR MEANING
Solid Red
Solid Purple
Blinking Red
Blinking Purple
Long Blinking Red
Long Blinking Purple
Ready to Connect
Connected to Home Network
Successfully
Ready to connect / Unable to
Connect to Home Network
Unable to Connect to Internet
Security Sensor Alert
Device/ Sensor Status Change

Disconnect the power adapter and other connected
peripherals
if any of the following conditions exist:
- The power cord or connector is damaged or frayed.
- You want to clean the Hub.
- The Hub or attached cables are exposed to rain,
water/fluids, or excessive moisture.
- The Hub power adapter is damaged or has been dropped
and you suspect it needs to be serviced.
- Read, Keep, and follow these instructions.
- Heed all warnings.
- Do not use this product near water or expose the product
to dripping registers, stoves or other apparatus (including
amplifiers) that produce heat.
- Only use attachments and accessories specified by the
manufacturer.
Safety Instructions
Some content and services accessible through this device
belong to third parties and are protected by copyright, patent,
trademark and/or other intellectual property laws. Such
content and services are provided solely for your personal
non-commercial use. You may not use content or services in a
manner that has not been authorized by the content owner or
service provider.
Without limiting the foregoing, unless expressly authorized by
the applicable content owner or service provider, you may not
modify, copy, republish, upload, post, transmit, translate, sell,
create derivative works, exploit, or distribute in any manner or
medium any content or services displayed through this device.
WARNING: No user-serviceable parts inside. Refer all servicing to
qualified service personnel.
IMPORTANT CONSUMER INFORMATION: Please read before activating
or using the device.
WARNING: This product contains chemicals cancer and reproductive
toxicity. For more information, Please visit www.b1hub.com
Disclaimer

(1) This device may not cause harmful interference,
and
(2) This device must accept any interference received,
including
Interference that may cause undesired operation
FCC Caution!!!
• Any changes or modifications not expressly
approved by the party
Responsible for compliance could void the user's
authority to operate this
Equipment
• This equipment should be installed and operated
with minimum distance
20 cm between the radiator & your body.
Part 15B compliance statements for digital devices:
NOTE: This equipment has been tested and found to
comply with the limits
for a Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in
a residential installation.
This equipment generates, uses and can radiate radio
frequency energy
And, if not installed and used in accordance with the
instructions, may
Cause harmful interference to radio communications.
However, there is no
Guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to
radio or television
FCC compliance statements
Hereby, Blaze Automation Inc. declares that this
product is in compliance with the essential
requirements and other relevant provisions of
Directive 1999/5/EC. The original Declaration of
Conformity may be found at www.b1hub.com.
Certified under FCC ID: 2AHV7-B-ONEHUB and IC:
21793-B1HUB
Certifications

Reception, which can be determined by turning the
equipment off and on,
The user is encouraged to try to correct the interfer-
ence by one or more of
The following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment
and receiver.
—Connect the equipment into an outlet on a circuit
different from that to
Which the receiver is connected
—Consult the dealer or an experienced radio/TV
technician for help.
This Class B digital apparatus complies with Canadian
ICES-003. This device complies with Industry Canada
license-exempt RSS standard(s).
Operation is subject to the following two conditions
1) This device may not cause interference, and
2) This device must accept any interference, including
interference that may cause undesired operation of
the device.
Le présent appareil est conforme aux CNR d'Industrie
Canada applicables aux appareils radio exempts de
licence. L'exploitation est autorisée aux deux
conditions suivantes:
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout
brouillageadioélectrique subi, même si le brouillage
est susceptible d'en compromettre le fonctionnement.
This equipment complies with radio frequency
exposure limits set forth by Industry Canada for an
uncontrolled Environment.
This equipment should be installed and operated with
minimum distance 20 cm between the device and the
user or bystanders. Cetéquipementestconforme aux
limitesd'exposition aux radiofréquencesdéfinies par
Industrie Canada pourunenvironnement non contrôlé.
Cet équipementdoitêtreinstallé et utilisé avec un
minimum de 20 cm dedistance entre le dispositif et
l'utilisateurou des tiers.

This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
ISED ICES-003. These limits are designed to provide
reasonable protection against harmful interference in
a residential installation. This equipment generates
uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions,
may cause harmful interference to radio
communications. However, thereis no guarantee that
interference will not occur in a particular installation. If
this equipment does cause harmful interference to
radio or television reception n, which can be
determined by turning the equipment off and on,
the user is encouraged to try to correct the
interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and
receiver.
- Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
Cetéquipement a ététesté et jugéconforme aux limites
de Classe B pour unappareilnumérique, en vertu de
l’article 15 de la réglementation de la
FCC.Ceslimitesontétéinstaurées pour fournirune
protection raisonnable
contretouteinterférencenuisibledansune installation
résidentielle. Cetéquipementgénère, utilise et
peutémettre de l’énergieradiofréquence. S’iln’est pas
installéetutiliséconformément aux
instructions, ilpeutprovoquer des interférencessur les
communications radio. Cependant, iln’est pas
garantique des interférences ne seproduiront pas
danscertaines installations.
Si cetéquipement cause des interférences à la
réception radio outélévisée (ce qui peutêtrevérifi é en
éteignantl’appareilpuis en le remettant sous tension),
l’utilisateurpeut tenter de les résoudre en
suivantuneouplusieurs des mesures ci-après :
Réorienteroudéplacerl’antenneréceptrice. Augmenter
l’espace entre l’appareil et le récepteur.
Brancherl’appareil à uneprise de courant différente de
cellesurlaquelle le récepteurestbranché.

Pour obtenir de l’aide, contacter le vendeurouun
technician radio/télévisionexpérimenté.
REMARQUE: Toutemodification non
autoriséeexpressément par le fabricantresponsable
de la conformitépeutannuler le droit de l’utilisateur
à faire fonctionner le produit.
This device is not a handheld device, user cannot
operate this device within his/her hands. User must
place this device on a table and control it from mobile
phone. So, the seperation distance is greater than
20cm always.
RF Exposure:
Please ensure that you stay at least 20 cm away from
this device while connecting/disconnecting the Power
Plug to this Device.
Caution to the User:

Blaze Automation, Inc. warrants this product (the “B.One Hub”)
against defects in materials and/or workmanship under
normal use for a period of ONE (1) YEAR from the date of
purchase by the original purchaser ("Warranty Period"). If a
defect arises and a valid claim is received within the Warranty
Period, then as your sole remedy (and Blaze Automation’s sole
liability), Blaze Automation will at its option either 1) repair the
defect at no charge, using new or refurbished replacement
parts, or 2) replace the Product with a new Product that is
functionally equivalent to the original, in each case within 30
days following receipt of the returned Product. A replacement
product or part assumes the remaining warranty of the
original Product. When a Product or part is exchanged, any
replacement item becomes your property and the replaced
Product or part becomes Blaze Automation’s property.
Obtaining Service: To obtain warranty service, visit
www.b1hub.com to speak with a service agent or open a
service request. Please be prepared to describe the product
that needs service and the nature of the problem
A purchase receipt is required. The Product must be insured,
and shipped freight prepaid and securely packaged. You must
contact support for a Return Material Authorization Number
(“RMA Number") before shipping any product, and include the
RMA Number, a copy of your purchase receipt and a
description of the problem you are experiencing with the
Product. Any claim under this Limited Warranty must be
submitted to Blaze Automation lnc. before the end of the
Warranty Period.
Exclusions: This warranty does not apply to: a) damage caused
by failure to follow instructions relating to the Product use or
the installation of components; b) damage caused by accident,
abuse, misuse, transport, neglect, fire, floods, earthquake or
other external causes; c) damage caused by service performed
by anyone who is not an authorized representative of Blaze
Automation; d) accessories used in conjunction with a covered
Product; e) a Product or part that has been modified to alter
functionality or capability; f) items intended to be periodically
replaced by the purchaser during the normal life of the
Product, including, without limitation, batteries, bulbs or
cables; g) a Product that is used commercially or for a
commercial purpose, in each case as determined by Blaze
Automation inc.
One (1) Year Limited Warranty

EXCEPT FOR BODILY lNJURY, BLAZE AUTOMATION INC. SHALL NOT BE
LIABLE FOR (I) ANY LOST PROFITS, COST OF PROCUREMENT OF
SUBSTITUTE PRODUCTS, OR ANY INCIDENTAL OR CONSEQUENTIAL
DAMAGES, OR (ll) ANY AMOUNTS IN EXCESS OF THE PURCHASE PRICE
FOR THE PRODUCT. IN EACH CASE WHETHER RESULTING FROM THE
USE OF OR INABILITY TO USE THIS PRODUCT, OR ARISING OUT OF
ANY BREACH OF THIS WARRANTY, EVEN IF COMPANY HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO
NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES. SO THE ABOVE LIMITATION AND
EXCLUSIONS MAY NOT APPLY TO YOU. TO THE EXTENT PERMITTED BY
APPLICABLE LAW, BLAZE AUTOMATION DISCLAIMS ANY AND ALL
STATUTORY OR IMPLIED WARRANTIES, INCLUDING WITHOUT
LIMITATION, WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
PARTICULAR PURPOSE AND WARRANTIES AGAINST HIDDEN OR
LATENT DEFECTS. IF BLAZE AUTOMATION INC CANNOT LAWFULLY
DISCLAIM STATUTORY OR IMPLIED WARRANTIES, THEN TO THE
EXTENT PERMITTED BY LAW, ALL SUCH WARRANTIES SHALL BE
LIMITED IN DURATION TO THE WARRANTY PERIOD. SOME STATES DO
NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY
LASTS, SO THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU.
This warranty gives you specific legal rights and you may also have
other rights. which vary from state to state. To exercise your rights
under this warranty. please follow the Instructions above under the
heading "Obtaining Service", or contact Blaze Automation at Blaze
Automation, Inc., 2050. Brunswick Plaza -1. State Highway 27, Suite #
201 , North Brunswick, NJ -08902.
B.One is a registered trademark of Blaze Automation Inc.

Thank You
Member Of Consortiums: