Blendworks BLENDER SET User manual

BLENDER SET
WITH SILICONE SPATULA, TAMPER
& TRAVEL CUP
FAQs can be found at
www.blend-works.net
Email us for any unanswered questions:
[email protected]
For product registration, please visit
www.blend-works.net
Blend-Works.net

on
off
liqui fy on
med
500
250
STOP STOP

on
off
≤200g
on
off
liqui fy on
med
500
250
max
ml
20002l
1700
1500
1200
1000
750
STOP STOP
LIQUIFY
PULSE

on
off
LIQUIFY
PULSE
LIQUIFY
PULSE
max
ml
20002l
1700
1500
1200
1000
750
500
250
max
ml
20002l
1700
1500
1200
1000
750
500
250

Problem Reason Solution
Machine stops working after long
periods of use
The blender has overheated Please ip the switch to “OFF“ and
unplug the power cable from the power
outlet. Remove the blending jar from
the base and free the blades from any
obtrusion NOTE: Do not use your hands
or ngers to remove any obstruction.
Press the black reset button on the
underside of the base as detailed below
While blending on a high speed,
the food has spilt out of the container
The lid was not secure Lock the lid to ensure no steam or
splashes escape to avoid possible
burns. Start on a low speed, then slowly
increasing to “MED” and nally “HI“.
While blending on a high speed, the
food does not circulate
The machine may be overloaded or
may have trapped an air bubble
Carefully remove the lid plug while
making sure the lid stays rmly in place.
Release the air bubble by inserting the
tamper through the lid plug opening.
Lower the speed if circulation problem
persists, then increase the speed once
the food is blending normally.