Blocklychain MS-104 User manual

Multi
Sensor
MS-104

2
Thank you for purchasing Multi Sensor. We are
excited to bring convenience, security, and
peace of mind into your home.
Control and monitor your home devices
from Internet.
HELLO
Remote Access
Multi Sensor connects to the Internet via
Wi-Fi.
Using Blockly, you can automate and
expand the functionalities of your Multi
Sensor.
Wi-Fi Connectivity
Blockly Programming

3
1
2
3
4
5
6
Click on Create Account
Type your e-mail address
Type your password
Re-type your password
Click on Create Account
Check your e-mail to verify your account ,
then click on I'm Already Veried
1
2
3
4
5
6
Create a New Account:
How to Install
App
Download Blocklychain App
Product
Installation
Guide

4
Click on Sign In
Type your e-mail address
Type your password
Click on Sign In
1
2
3
4
1
2
3
4
Sign In:

5
To install a new device in
Android, make sure the mobile
Bluetooth is turned on and
allowing the app to "access
device's location / Bluetooth"

6
How to Mount
Multi Sensor
To mount the Multi Sensor, stick the big part on
the frame of the door or window. Then, place the
small part on the surface opposite the big part.
Maximum recommended gap between the big
and the small parts is 2cm.
Strip the Shielding o of wires then connect the
to a 12V 500mA< power supply.
Adapter
12V 500mA

7
1
2
3
How to Install
Device
Click on Add Device
Choose device type
Turn on your bluetooth, then click on Next
1
2
3

8
Find your device from the list, then click on Connect
Click on Search Wi-Fi
Searching for available Wi-Fi networks
Choose your Wi-Fi SSID
Type your Wi-Fi password Click on Set Device Wi-Fi
4
5
6
7
8
5
6
7
8
4

9
If the device installation process finishes
successfully, the message Abe displayed.
Otherwise, the message Bwill be displayed.
It indicates that something went wrong and
you will need to redo the installation process
again.
AB

10
How to Monitor
Your Device
Back to home in app. Then, go to the BKC
control Panel.
Click on BKC Control Panel icon
Click on Devices
This is Device Card
1
2
3
1
2
3

11
Name of the device
Door Status
Motion Detector Status
Temperature and humidity data
Device dashboard
Device connection indicator
1
2
3
4
5
6
2
3
6
5
1
4

12
Update device
Reset Factory
1. Click on the button on your device.
2. Go to BKC Control Panel.
3. Go to Devices page.
4. On the device card, click on the device
dashboard button.
5. Go to the Cong tab.
6. Click on Update Now.
Click and release the button, then press and
hold it for 10 seconds.
On your Multi Sensor

13
Device Dashboard
Clicking on the gear icon on the Multi Sensor
card, a pop-up window opens with 3tabs.
In Monitor tab, there are data about device
functions.
In Data Graph tab, a bar chart represent
power consumption during time.
Monitor
Data Graph

14
In Cong tab, you can update rmware,
rename device, and remove your device
from BKC Control Panel.
Cong

15
Working Modes
Reset Factory
Status Indicator Description
2 seconds 2 seconds Ready to install
Solid Orange (After 10 seconds) Device is back to factory
condition
0.2 second 0.2 second Connecting to Wi-Fi
0.1 second 0.1 second App connected to device
4 seconds 4 seconds Problem connecting to server
Solid Orange Connecting to server
Fading Orange Connected to server
LED's Status

16
Caution
1. Do not disassemble the product.
2. This device may contain small parts that
may be a choking hazard to children. Keep the
device out of the reach of small children.
3. Radio-frequency emissions and magnetic
eldsfromelectronicequipmentcannegatively
aect the operation of other electronic
equipment, causing them to malfunction. The
wireless transmitters and electrical circuits in
thedevicemaycauseunintentionalinterference
in other electronic equipment. Persons with
pacemakers should always take the following
precautions: The American Heart Association
recommends that a minimum separation of
15 cm (6inches) be maintained between a
wireless device and a pacemaker to avoid
potential interference with the pacemaker.
Do not carry your device in a chest pocket.
4. Parts of your device are magnetic and may
attractmetallicitems.Donotplacemagnetically
sensitive devices, credit cards, other magnetic
storage media near your device.

17
Temperature Sensor Accuracy
Hygrometer operating range
Relative Humidity Sensor Precision
Angle Detection
Distance Detection
States
States
States
Thermometer Hygrometer:
Motion Detector:
Door Sensor:
Smart Button:
±0.4 °C (max), –10 to 85 °C
0to %100 RH
± %3 RH
60 degrees
8 meters
Scanning... / Detected
Open / Closed
Pressed / Double / Triple
Features
Specication
Device
Product Name
Model
Size (big part)
Size (small part)
Weight (big part)
Weight (small part)
Material
Communication
Power
Multi Sensor
MS-104
7x2x2.5 cm
5x1x1 cm
22 g
4 g
ABS
Wi-Fi 802.11 b/g/n 2.4GHz
USB Type-C / 12V DC 500mA

18
1x Multi Sensor
1x Big Part
1x Small Part
For further help or inquiries:
1) Email [e-mail], or
2) Login to your account on BKC Control Panel , click
on , and submit a ticket.
All right reserved. Copyright © 2022 Blocklychain
Package Content