Blomberg GSN 9476 A User manual

Dishwasher
Instruction Manual
GSN 9476 A

Welcome
Dear customer
Congratulations on your choice of a quality dishwasher which has been designed
to give you lasting service.
Please read these instructions before installing the dishwasher and using it for the
first time. The information contained herein is provided to avoid accidental risks
and/or damage to your appliance
Make sure you understand the controls prior to using your appliance. The
dishwasher must only be used for it’s intended purpose, i.e. the washing of dishes
in the home. Failure to observe these instructions may invalidate your right to free
service during the guarantee period.
Please keep these instructions in a safe place for your future reference
If you have any questions, or if you are not sure about any information contained
in this booklet please contact us - details are on the back cover.
Customer Service
Notes
Due to the quality control processes during production, there may be some
water left in your machine. This does not cause any damage.
Preparation before use
It is recommended that the dishwasher is operated on the Eco programme
with prewash before loading with dishes.

TABLE OF CONTENTS
1 Know your dishwasher
/ specification 3
2 Warning and safety
information 5
Electrical Safety 5
Children’s Safety 5
General 5
Recycling 6
Energy and water saving 6
What should not be washed in your
dishwasher 6
3 Before first use 7
Electrical requirements 7
4 Installation 7
Warning 8
This appliance must be earthed 8
Important 8
Fitting a different plug 8
Water inlet hose connection 9
Drain Hose Connection 9
5 How to use 11
Water hardness & regeneration
settings 11
Water Hardness Level Adjustment
Table 12
Adding Dishwasher Salt 13
Detergent use 13
Filling detergent dispenser 15
Rinse aid 16
Loading the dishwasher 17
Folding plate support rods 18
Movable Cutlery Basket 18
Upper basket height adjustment 19
Folding Tines 19
Basket insert with variable height
settings 20
6 Programme Selection and
Operating Your Machine 21
Button and Button Descriptions 22
Turbo fan heat drying system 23
Programme Selection 23
Adding Functions to the Programme 23
Programme Steps Follow-up 24
Cancelling a Programme 24
Changing a Programme 24
Programming the Delayed Start 24
Usage of Child Lock 25
Salt Indicator 25
Rinse Aid Indicator 25
Rinse Aid Indicator Setting 25
Starting Your Machine 26
7 How to clean your
dishwasher 28
Stainless steel door cleaning
instructions 28
Upper spray arm 29
Lower spray arm 29
8 Before calling service
/ Trouble shooting 30
9 Guarantee Details 32

3GB
1

























Know your dishwasher / specification
Rapid Button
Handle Combi Tablet Detergent Button
On/Off Button
Time Delay Button
Start / Pause / Cancel Button
LCD Display
Programme Selection Button
Half Load Button

4GB
Specification
Load Capacity : 13 Place settings
Height : 850 mm
Width : 598 mm
Depth : 598 mm
Depth/Height (without worktop) : 570 mm / 820 mm
Net weight : 46 kg
Supply voltage : 220-240 V ~ 50 Hz
Fuse currrent : 13 A
Total power : 1900-2200 W
Heater power : 2000 W
Pump powers : 90/30 W
Diameter of plates for :
Upper basket : 25 cm max.
Lower basket : 31 cm max.
Because we continually strive to improve our products, we may change our
specifications and designs without prior notice.
Note for Testing Institutes
The necessary information for performance testing will be provided upon request.
The request can be done by e-mail through:
[email protected]
Please do not forget to write the model code ,stock code and serial number
information of the appliance besides your contact information in the e-mail.
The model code, stock code and serial number information can be found on the
rating label, which is placed on the side of the door.

5GB
2Warning and safety information
Electrical Safety
The dishwasher should only be
operated on the voltage specified. For
electrical safety, only earthed plugs
and sockets should be used. Always
use the fused plug provided with the
appliance. The user is responsible
for meeting these basic safety
requirements. The life of your machine
and your safety depend on you using
an electrical installation compliant to
standards.
Do not use an extension cable.
When disconnecting your machine
from the mains supply, always pull from
the plug. Never pull the cord itself.
Children’s Safety
Never allow your children to play with
your dishwasher.
This appliance is not intended for use
by persons (including children) with
reduced physical, sensory or mental
capabilities, or lack of experience
and knowledge, unless they have
been given supervision or instruction
concerning use of the appliance by a
person responsible for their safety.
Dishwasher detergents contain irritants
and abrasives. These ingredients might
have caustic effects in the eyes, mouth
and throat.
They can be extremely dangerous if
swallowed. Avoid contact with skin
and eyes. Check that the detergent
receptacle is empty after completion of
the wash cycle.
Keep detergents out of children’s
reach and do not put detergent in the
machine until right before you start the
washing programme.
The water in your dishwasher is not
suitable for drinking, for this reason
do not allow your children near your
machine when the front door is open.
Never allow your children to play on or
sit onto the front door when the front
door is open.
After unpacking your machine, keep the
packing material out of children’s reach.
Warning !
Long cutlery, such as ladles and
long knives, etc must be placed
horizontally on top of the full cutlery
basket or on the racks to prevent
accidental injury.
General
This dishwasher has been designed to
clean your dirty dishes at home.
Never use chemical solvents in your
machine; this may lead to explosion risk.
Never use materials other than specially
produced softening salts in the salt
dispenser of your machine.
Never use materials other than specially
produced detergents and rinse-aids in
the detergent and rinse aid dispensers of
your machine.
Please dispose of the packaging material
and old appliances carefully. Please
ensure old machines do not become
a threat to child safety. It is known that
children lock themselves in unused
machines. To avoid such a problem it is
advised that you cut the mains cable off
and break the door latch so it does not
lock.

6GB
The door of your machine is designed
to support the weight of a full basket
when the lower basket is pulled all the
way out. Never place any other load on
the door, otherwise the machine may tip
over.
After using the dishwasher always close
the door as an open door can be a
hazard.
Do not open the door whilst the
appliance is in operation.
Recycling
Please help us to protect our
environment. Packing materials and
some parts of your machine are
produced using recyclable materials.
These materials are marked up with
recycling symbol and material type
information (>PE<, >PS<, >POM< …).
These raw materials should not be
mixed with general refuse and should be
given to recycling centers.
We suggest you contact your local
authority for disposal information and
facilities available.
This product bears the
selective sorting symbol for
waste electrical and electronic
equipment (WEEE).
This means that this product
must be handled pursuant to European
Directive 2002/96/EC in order to be
recycled or dismantled to minimize its
impact on the environment. For further
information, please contact your local or
regional authorities.
Electronic products not included in the
selective sorting process are potentially
dangerous for the environment and
human health due to the presence of
hazardous substances.
Energy and water saving
Scrape excess food from the dishes
before loading. Start your dishwasher
after fully loading the machine. Do not
use the pre-wash programme unless
required. Make your programme
selection as per the programme chart
and quick reference guide supplied.
What should not be washed in
your dishwasher
Do not wash items soiled with cigarette
ash, candle, paint wax, dyes, chemicals
etc. since these may damage your
machine
Do not wash forks, knives and spoons
with wooden or bone handles, items
stuck together with adhesives, plastic
items not resistant to high temperatures.
Copper, tin items and aluminium ware in
your dishwasher.
As with hand washing, some “on-
glaze” decorated china, aluminum or
silver have a tendency to discolour or
fade. Also, certain types of glassware
and crystals may lose their shine and
become opaque in time.
A chemical reaction can occur between
silver cutlery and stainless steel cutlery.
As a precaution, do not wash together.
Iron and cast iron objects can rust and
stain other items.
Pay special attention to whether or not
the item you wash in the dishwasher is
dishwasher-proof.
If in doubt, contact the manufacturer of
the item.
Do not overload your dishwasher or
do not load items other than those
mentioned in this manual.

7GB
After unpacking your dishwasher,
check the machine against any
possible transportation damage. Never
install and use damaged machines. If
your machine is damaged contact your
retailer. Always have your machine
installed by qualified electrician/
plumber to ensure correct installation.
Any repairs and maintenance work
on this dishwasher should be carried
out by authorised service staff only.
Unauthorised repairs are not only
dangerous, but also lead to the
cancellation of your warranty.
If your dishwasher has an Internal
Lighting; incase of a defect broken
lamps can be changed by an
authorized service technican.
Make sure the electricity and water
connections of your dishwasher are
in compliance with the instructions for
assembly as stated in the relevant part
of this booklet.
Any water remaining in the dishwasher
after production should be carefully
removed due to reasons of hygiene.
Therefore, always select a pre-wash
programme before first use
(Pre-wash or Economy programme).
Before the first wash, add 1 lt of
water to the salt container of your
machine.
3Before first use 4
When deciding on where to install
your new dishwasher, ensure that the
position of your dishwasher makes it
easy and quick for you to place the
dishes in the dishwasher and also to
take them out and store away after the
dishwashing is completed.
Avoid placing the dishwasher where
the ambient temperature is likely to fall
below. 5 degrees C. (41° F)
When positioning your appliance, take
care not to damage your flooring, pipes
wall coverings etc. Do not move the
appliance by pulling by the door or
handle
Installation
Electrical requirements
Before you insert the plug into the wall
socket make sure that the voltage and
the frequency shown in the rating label
corresponds to your electricity supply.
We recommend that this appliance be
connected to the mains supply via a
suitable switched and fused socket in a
readily accessible position.
If the supply cord or the mains lead
is damaged please do not replace it
yourself. The supply cord or the mains
lead must be replaced by a Blomberg
Authorized Service Agent or a similarly
qualified person.

8GB







Warning
This appliance must be
earthed
If the fitted moulded plug is not suitable
for your socket, then the plug should
be cut off and an appropriate plug
fitted.
Destroy the old plug, which is cut off as
a plug with a bared cord could cause a
shock hazard if inserted into a socket
elsewhere in the house.
The moulded plug on this appliance
incorporates a 13A fuse. Should the
fuse need to be replaced an ASTA
approved BS1362 fuse of the same
rating must be used. Do not forget
to refit the fuse cover. In the event of
losing the fuse cover, the plug must
not be used until a replacement fuse
cover has been fitted. Colour of the
replacement fuse cover must be the
same colour as that visible on the
pin face of the plug. Fuse covers are
available from any good electrical
store.
Important
Fitting a different plug
As the colours of the wires in the
mains lead of this appliance may not
correspond with the coloured markings
identifying the terminals on your plug,
proceed as follows:
1. Connect the green - yellow or
green (earth) wire to the terminal
in the plug marked ‘E’ or with the
symbol or coloured green
and yellow or green.
2. Connect the blue (neutral) wire to
the terminal in the plug marked ‘N’
or coloured black.
3. Connect the brown (live) wire to
the terminal in the plug marked ‘L’
or coloured red.
With the alternative plugs a 13A fuse
must be fitted either in the plug or
adaptor or in the main fuse box. If in
doubt contact a qualified electrician.

9GB
Water inlet hose connection
Make sure your plumbing is suitable to
install your new dishwasher. If in doubt
contact a qualified plumber.
The appliance must be connected
to the water mains using the new
hose set supplied with your new
dishwasher. Old hose sets must not
be re-used.
The water pressure coming from
the water mains supply must be a
minimum of 0.3 and a maximum of 10
bars.
Connect the straight end to your water
mains supply
1
Ensure plastic filter
and black rubber seal is in place.
Please turn on the tap and check for
leakages after connecting the hose.
We recommend the tap is turned off
when the machine is not being used.
If you only have one cold water
feed (For example for your washing
machine) don’t worry, a Yadaptor
will provide you with the additional
cold water feed you need for your
dishwasher. Yadaptor is available from
most DIY stores.
Drain Hose Connection
Fit the drainage hose of your machine
to the drainage pipe without bending.
Secure your hose firmly to the waste
pipe to avoid it coming off during the
washing process.
The waste pipe must only be
connected into the foul drains and not
surface water drainage system.
The hose should be placed between
50 cm and 110 cm from the floor level
and must not be extended otherwise
the machine may not empty the waste
water.
�

           







10 GB

Installation of dishwasher
Remove all packaging before
positioning the machine.
See the following diagram. Ensure
there is a clearance each side of the
machine to allow slight side ways
movement for servicing.
Note:
If there is already enough space, you
don’t need to remove the worktop to
install it under the counter.
Position the machine next to a water
tap and a drain.
When inserting the machine, ensure
that the water inlet and drain hoses are
not linked or squashed.
Care must be taken to ensure that
the appliance does not stand on the
electrical supply cable.
Good levelling is essential for correct
closure and sealing of the door.

11 GB
Make sure your
dishwasher
is perfectly
level using the
adjustable feet.
When the
appliance is
correctly levelled,
the door will not
catch on the
inner liner on
either side of the
cabinet.
If the door
does not close
correctly, loosen or tighten the adjustable feet, until the machine is perfectly level.
��
Water hardness & regeneration settings
The dishwasher requires lime free water. Hard water leaves watermarks on your
dishes. Your dishwasher has a special water softening system to remove the
hardness of the tap water. Setting this system correctly will increase the washing
effectiveness.
To find out the water hardness level of water in your area, contact your local
Water Board or Determine water hardness level by the help of test strip provided.
If you move to a different location, the level of water hardness will possibly
be different. It is essential to reset the water hardness in order to obtain
optimum washing efficiency.
5How to use












 











 













12 GB
To Adjust the Water Hardness;
1. Press and hold the Programme Selection Key when the machine is off and
press On/Off button simultaneously to turn on your machine. Release the
Programme Selection Key when the water hardness level stored on your machine
is displayed in “r…..” format.
2. Start / Stop icon will start flashing as soon as the water hardness level stored
on your machine is displayed in “r…..” format.
3. Select the water hardness level suitable to your machine from the Water
Hardness Level Adjustment Table by pressing the Delayed Start Key.
4. Press «Start/Pause/Cancel» key once to store the level you have selected.
5. Start / Stop icon will light continuously when the new water hardness level is
stored.
6. Press the On/Off button to turn off your machine.
Water Hardness Level Adjustment Table
If the hardness level of the water that you use is above 80 °dF (French standard
for water hardness) or if you are using well water, then it is recommended to use
filter and water purification devices.
If the hardness level of the water that you use is below 9°dF (French standard for
water hardness), there is no need to use salt in your dishwasher.
If the water hardness adjustment is set to level 1, the “No salt warning indicator”
will illuminate continuously although it is not necessary to use salt. If you use salt
under this condition, salt will not be consumed and the lamp will not illuminate.
If the tap water is excessively (6th
degree) hard, set the water hardness
adjustment to level 5 and “Regenera-
tion Adjustment Switch” to position 1.
6th Level
Very hard water
Regeneration Adjustment
Switch
Hardness
Level
English
Water
Hardness
°dE
German
Water
Hardness
°dH
French
Water
Hardness
°dF*
Position of
regen-
eration
adjustment
switch
Water Hardness Level Indicator
1st Level 0-6 0-5 0-9 Press the Delayed Start key to switch
the water hardness level to position 1.
2nd Level 7-14 6-11 10-20 Press the Delayed Start key to switch
the water hardness level to position 2.
3rd Level 15-21 12-17 21-30 Press the Delayed Start key to switch
the water hardness level to position 3.
4th Level 22-28 18-22 31-40 Press the Delayed Start key to switch
the water hardness level to position 4.
5th Level 29-42 23-34 41-60 Press the Delayed Start key to switch
the water hardness level to position 5.
6th Level 43-75 35-60 61-107 Press the Delayed Start key to switch
the water hardness level to position 5.

13 GB
Detergent use
Any brand of powder, gel and tablet
detergents that have been designed for
household dishwashers, may be used.
Keep detergents in a cool and dry
place and out of the reach of children.
Detergent must be added to the
container before each use.
Detergent overdose may cause
scratches on your dishes and there
may be traces of detergent left in your
machine.
Three types of detergent are available
Phosphate and containing•
chlorine.
Phosphate containing no chlorine•
Neither containing phosphate nor•
chlorine
New compact powders are generally
phosphate-free. As phosphates have
water softening properties, we suggest
you add salt to the salt container even
if the hardness of your water is as low
as a 6 clarke degrees.
In hard water areas if a phosphate free
detergent is used, white marks on the
dishes and glasses may be observed.
It may be prevented by increasing the
amount of detergent.
Detergents without chlorine have less
bleaching effect. Coloured stains may
not be completely removed. This may
be prevented by increasing the amount
of detergent, using a programme with
a higher wash temperature or using a
detergent with chlorine.
Adding Dishwasher Salt
Only use special pelletized dishwasher
salt in your machine to soften the hard
water. Never use other types of salts
including table salt, animal feeding salt,
sea salt, culinary salt. These types of
salt do not dissolve in water easily and
will damage your appliance beyond
repair.
When you run the dishwasher, the
Water softener will be full of water.
Therefore, adding softening salt
should always be done immediately
before you start the dishwasher.
Caution : Only fill with salt just before
starting one of the complete washing
programmes to prevent any grains of
salt causing corrosion. Ensure 1 Litre
of water has been added. You can put
approximately 2 kg softening salt in the
Water softener.
To fill the container with softening
salt, remove the lower rack first and
unscrew the cap of the water softener
turning anti clockwise.
Using the funnel provided will make
filling easier.
After you fill the container, screw cap
tightly back into place turning clockwise
until you hear a click sound.
















14 GB
Warning!
Two-in-one and three-in-one
detergents
You will obtain the best results from
your dishwasher if you use separate
detergent, rinse aid and water-
softening salt.
Detergent manufacturers also produce
combined detergents known as ‘two-in-
one’ and ‘three-in-one’.
Three-in-one: These products contain
detergent, rinse aid and water-
softening salt.
Two-in-one: These products contain
detergent and either rinse aid or water-
softening salt.
In general, you will obtain satisfactory
results from combined detergents only
under specific usage conditions. These
detergents contain predetermined
amounts of rinse aid and/or softening
salt. This means that you cannot adjust
the amount of water-softening salt
and rinse aid required to suit the water
hardness level in your home.
You should bear the following points in
mind when using such detergents:
Be sure to check the specifications•
of the product you are using and
whether it is a combined product
or not.
Follow the instructions on the•
packet when using these products.
The use of these products at the•
correct appliance settings will
ensure economical use of salt and/
or rinse aid.
If the detergent is in tablet form,•
never place these in the internal
section or cutlery basket of the
dishwasher. Always place the
tablets in the detergent dispenser
of the detergent holder.
Using three-in-one detergent,
softening salt and rinse aid.
These detergents will not give you•
the same drying performance that
you can obtain by using separate
detergent, salt and rinse aid. To
increase the drying performance:
Put your appliance’s rinse aid•
setting at “1” and apply rinse aid.
When the rinse aid is used up,
add more rinse aid to the rinse aid
dispenser.
If you use combined detergents•
with a rinse aid setting higher
than 1, hand contact may leave
rainbow-coloured water stains on
the washed items and inside the
machine.
If you use combined detergents•
without adding salt, lime scale may
form especially on glasses. To
avoid lime scale formation:
Put your appliance’s water•
softener setting at “1” and add salt.
When the salt is used up, add
more salt to the water softener.
Using two-in-one detergent:
detergent and softening salt
These detergents do not contain•
rinse aid so you need to use the
rinse aid setting as described
in the manual, making sure that
there is rinse aid in the rinse
aid dispenser with every wash
and that you refill the rinse aid
dispenser with rinse aid every time
it is empty.

15 GB
Using two-in-one detergent and
rinse aid
These detergents will not give you•
the same drying performance that
you can obtain by using separate
detergent, salt and rinse aid. To
increase the drying performance:
Put your appliance’s rinse aid•
setting at “1” and apply rinse aid.
When the rinse aid is used up,
add more rinse aid to the rinse aid
dispenser.
If you use combined detergents•
with a rinse aid setting higher
than 1, hand contact may leave
rainbow-coloured water stains on
the washed items and inside the
machine.
These detergents do not contain•
softening salt so you need to use
the softening setting as described
in the manual, making sure that
there is salt in the water softener
with every wash and that you refill
the water softener with salt every
time it is empty.
Important warning
Should you encounter a problem that
has previously never occured after you
start using these detergents, contact
the detergent manufacturer directly.
You will find contact details on the
packet.
If you stop using this kind of
detergent:
Ensure that the salt and rinse aid•
dispensers are full.
Put the water hardness setting at•
the highest level and run a wash
cycle with the appliance empty.
After washing while empty, return•
the water hardness setting to the
correct level for your mains water
hardness shown in the manual.
Put the rinse aid setting at the•
correct level.
Filling
detergent
dispenser
If the dishwasher
is considerably
full and the
dishes are
relatively dirty,
fill the main
container (A) up to 25cm³ level. If the
dishwasher is not quite full and the
dishes are only slightly soiled, fill the
main container (A) only up to 15cm³
level.
If your dishes are kept unwashed for
a long time and the food particles are
stuck on the dishes also fill the small
container (B) up to 5cm³. Depending
on the degree of soiling and the
water hardness in your area it may be
necessary to add more detergent.
Powder and gel detergents are poured
into the dispenser.
If you are using tablet detergent read
the manufacturer’s recommendations
on the packaging in order to determine
where the tablets should be placed
inside the dishwasher (detergent
dispenser, cutlery basket, etc.)
After you put in the detergent, shut the
container lid (D) and ensure you hear
the clicking sound.
During the wash programme the
detergent will dispense automatically
and the lid (D) will remain open when
the programme finishes.
Do not use detergent when using the
pre-wash programme.

16 GB
Detergent residues
Regular use of low temperature
washes and/or short duration
programmes can lead to undissolved
detergent residue build up. We
recommend to carry out a service wash
at the highest temperature possible
every 3 - 4 months with the dishwasher
empty and without using detergent. It
is not recommended to carry it out with
auto programme.
Rinse aid
Use only rinse aid intended for
household dishwashers.
The rinse aid is specially formulated
to be used in the dishwashers for the
prevention of watermarks and scale on
dishes and to increase the efficiency
of the washing and drying processes.
Therefore, make sure that
there is adequate amount of rinse
aid in the rinse aid dispenser of your
machine.
You can adjust the amount of rinse
aid used during the wash programme
by turning the rinse aid dispenser
regulator (C).
The dispenser regulator (C) may be set
between levels 1 and 6 (6 being the
maximum amount of rinse aid usage).
Your machine is pre-set at the factory
to level 4.
According to the finish and drying
results obtained, adjust the dose of
rinse aid by means of the six position
selector. (Position 1: minimum dose,
Position 6: maximum dose.) Gradually
increase the dose if there are drops of
water or lime spots on the dishes after
washing. Reduce it if there are sticky
whitish streaks on the dishes.
Filling the rinse aid dispenser
Open the rinse aid dispenser lid by
pressing the button as shown in the
diagram.
Fill up with rinse aid until the container
is full to level of ’max’ mark .
Put the lid (E) on and ensure you hear
the clicking sound.
Remember to CLOSE the lid after
every refill.
Make sure you clean any rinse aid that
you might have spilled.

 

17 GB




Loading the dishwasher
Loading the dishwasher correctly will
increase the washing, drying and
energy performance of your machine.
Examine the information given in this
section and the information stated
in the Programme chart and quick
reference card given with the manual.
Remove any large scraps of food
from the dishes before placing in the
dishwasher to avoid clogging the filters.
There are three separate baskets, in
which you can put your dishes.
Place large or heavily soiled items in
the lower basket, and small, light or
delicate articles in the upper basket.
Put forks, small and medium size
knives and spoons in the cutlery
basket.
Place tall, narrow items in the middle of
the racks.
Long-stemmed glasses should lean
against the basket, the racks, or the
supports not against the dishes.
The shelves on the rack are made
height adjustable to accommodate tall
items.
When loading your dishwasher please
ensure tall glasses (and/or wine
glasses) rest against the sides of the
upper basket. Do not allow tall glasses
to rest against each other since they
may be damaged during washing if not
properly supported.
Always arrange saucepans, cups and
glasses etc. upside down.
You can fold the racks in the upper
basket when you need more space for
larger items.

18 GB


�
Folding plate support rods
There are four separate “folding plate
support rods” in the lower basket of
your dishwasher designed to allow
you more space to accommodate
saucepans and large bowls in the
lower basket. You can either fold each
section (1,2,3,4) individually or, all at
once, to create a large empty space.
Simply press the handgrips (A) and
fold them down”
Movable Cutlery Basket
Designed to allow free placement of
the dishes according to their size, the
movable cutlery basket can slide over
the tines to the left (A) and right (B)
side.

19 GB


Upper basket height
adjustment
The upper basket is equipped with a
lifting mechanism which enables you to
change the height of the basket even if
it is fully loaded, and without having to
remove it from the dishwasher.
The height of the upper basket was set
at the factory to the lowest position. To
lift the upper basket to the “high”
A
position, hold it on one side and
carefully pull it upwards. To lift the
opposite side of the basket, hold it and
pull it upwards in the same manner.
A
To lower the upper basket, hold the
basket lever on one side and carefully
lower the basket without releasing the
lever.
B
Repeat the procedure with the lever
on the opposite side of the basket.
Make sure that both levers catch in the
same height position.


Folding Tines
There are “folding tines” in the upper
rack to allow you more space to
accommodate glasses or cups.
Simply pull in the first front folding tine,
move it to left (A) and right (B) to place
in another positon. When you need,
take the tines down until the tines fall
down.