Blue Diamond 37392 User manual

2.4G Wireless set
(keyboard and mouse Combo) USER ’ S MANUAL
Connect Combo - French
Brand: BlueDiamond
SKU: 37392
Thank you for buying MS wireless set. In your set you will find: keyboard, mouse, nano receiver
and 3xAAA batteries.
Fitting batteries in the keyboard
Turn the keyboard upside down and remove the battery compartment cover by putting pressure
on the recess and carefully pushing the cover upwards. Insert the batteries (1 batteries, type
AAA, 1.5 V) in the battery compartment of the keyboard. Ensure that the battery poles
correspond to the "+"and"-" markings. Slide the battery compartment cover back on until it locks
into place.
Fitting batteries in the mouse
Turn the mouse upside down and remove the battery compartment cover by putting pressure
on the recess and carefully pushing the cover upwards. Insert the battery (type AAA x 2, 1.5 V)
in the battery compartment of the mouse. Ensure that the battery poles correspond to the "+"
and "-" markings. Slide the battery compartment cover back on until it locks into place.
USING KEYBOARD AND MOUSE
Connecting the receiver
Turn the computer On and insert the USB Nano receiver in the corresponding USB socket of
your PC. Position both the keyboard and mouse so they are comfortable to use. Ensure that
both the keyboard and mouse are less than 10m from the USB receiver dongle.
Mouse switch On/Off
Move switch to ON position when you want to use mouse. When you won't not use mouse
for some time, turn switch to OFF position. This way you will save energy consumption.

TROUBLESHOOTING
If the mouse and keyboard stop working please try following:
• Check the polarity (+/-) on batteries, maybe they are not inserted correctly.
•Change batteries for new ones if necessary.
•If you are mouse is not working well, try to use it on mouse pad.
•Make sure the USB Receiver is plugged into a USB and the computer is on.
•Connect the receiver into the USB port and press the mouse's middle & right buttons for
about 5 seconds and release. The mouse will move the onscreen cursor to indicate a
successful connection.
•Press the ESC+ = keys on the keyboard for another 5 seconds. The battery low indicator
will flash to indicate a connection.
Cautions:
•Read all instructions carefully and keep this manual for future reference. Please install
the appliance with the instruction guide to use.
•Risk of explosion if battery is replaced by an incorrect type and dispose of used
batteries according to the instructions.
•Do not use water, detergents, abrasive cleaning liquids or chemical agents to clean
the appliance.
•Before you clean the appliance, take the battery out.
•If the appliance is not used for a long time, please take the battery out.