Blue Thumb Mag-Drive 120 User manual

WARRANTY
60-MONTH LIMITED WARRANTY
All Blue umb Mag-Drive pumps are warranted to the user against defective material and workmanship under
normal use for a period of 60 months from the date of purchase by the original purchaser (Provided that your pump
was registered within 60 days of purchase). Replacement liability in all events is limited to replacing or repairing at
Blue umb’s sole discretion of any part or parts which are defective in material or workmanship. Proof of purchase is
required on all claims in the form of invoice copy, sales ticket, etc. Warranty void if pump is not installed as per these
instructions. All pumps returned will be inspected to determine cause of failure before warranty approval.
e warranty and remedy described in this limited warranty is an EXCLUSIVE warranty and remedy IN LIEU
of any other warranty or remedy, expressed or implied, which other warranties and remedies are hereby expressly
EXCLUDED, including but not limited to any implied warranty of MERCHANTABILITY or FINESS for a
PARTICULAR PURPOSE. is warranty gives buyer and use specic legal rights, and buyer and user may also
have other rights which vary from state to state. Some states do not allow the exclusion or limitation of incidental or
consequential damages, so the above limitation or exclusion may not apply to you.
FOR YOUR RECORDS
Please keep receipt in case of warranty service
Date of Purchase________________________
Model number__________________________
Serial Number__________________________
Dealers stamp___________________________
VIEW OTHER GREAT BLUE THUMB PRODUCTS ON-LINE AT WWW.BLUETHUMBPONDS.COM.
Blue Thumb, Inc.
2650 Schust Rd.
Saginaw, MI 48603
Phone: [phone]
www.bluethumbponds.com Models
Mag-Drive 120
Mag-Drive 180
Mag-Drive 290
Mag-Drive 370
Mag-Drive 530
Mag-Drive 660
Mag-Drive 800
Mag-Drive 1110
Mag-Drive 1300
Mag-Drive 1495
Mag-Drive 1980
OWNER’S
MANUAL
Blue umb Pump Specications
* Wattage will vary based on head pressure.
Model Power (Watt) Flow (GPH) Max. Head (Feet) Current (Amp) Cord Length Outlet
MD 120 7 120 2.60 0.08 6 ft ¾ in
MD 180 9.5 180 4.70 0.12 6 ft ¾ in
MD 290 16 290 5.95 0.23 16 ft 1 in
MD 370 24 370 7.60 0.40 16 ft 1 in
MD 530 33 530 7.92 0.55 20 ft 1 in
MD 660 43 660 8.82 0.73 20 ft 1 in
MD 798 58 798 9.30 0.80 20 ft 1 in
MD 1110 92 1110 12.20 0.85 20 ft 1 in
MD 1300 110 1300 13.50 1.00 20 ft 1¼ in
MD 1495 153 1495 16.70 1.46 20 ft 1¼ in
MD 1980 250 1980 20.00 2.60 20 ft 1¼ in
APPROVED
SERENITY SKIMMER CRYSTAL SKIMMER SMALL PUMP SOCK

Congratulations!
You have purchased a quality pump from Blue umb, Manufacturers of Quality Pond Products.
If you experience trouble with your pump please reference the Troubleshooting section of this manual.
If you are unable to remedy the problem please contact your local Blue umb dealer for further assistance.
IMPORTANT
PLEASE READ BEFORE USING YOUR PUMP
To insure proper operation of your pump and receive maximum life of this product, it is important that you
read the owners manual completely.
BLUE THUMB PUMP INFORMATION
Blue umb products are created by experienced pond professionals. ese multi-purpose submersible
pumps are designed for use in water garden and koi pond ltration systems, and to create waterfalls, streams
and water features.
Mag-Drive models are suitable for pumping clear ltered water, such as when using a Blue umb
Pond Skimmer or when placed inside a pump sock. e temperature of the water being pumped must
never exceed 95 degrees Fahrenheit. Do not pump sewage, inammable, corrosive or explosive liquids
(e.g. petrol, fuel, dilutents), greases, oils, or foodstus.
For Your Safety
e power cord must never be used to carry or move the pump.
e pump should be unplugged before taking any action on the pump including placing it into
or removing it from the water.
If the power supply cord has been damaged, it must be replaced by the manufacturer’s authorized
customer support service in order to avoid all risks.
Installing the pump
• ese pumps can be installed in a pond skimmer or submerged directly into the water.
• e pump must always have water running through it. Running the pump dry will void the warranty.
• Do not place the pump where it can become clogged with debris or gravel. Do not set the pump on the
bottom of the pond to prevent the pump from draining the pond. Monitor the pump regularly to make
sure the intake remains unclogged.
• Plug the pump into a ground fault interrupter (GFCI) protected outlet that is in a dry place, protected
against any risk of ooding. Verify that the power supply voltage and frequency match the specications
on the pump nameplate.
DO NOT cut the cord and direct wire the pump for any reason. Doing so will void the warranty.
Winter Operation
e pump may be run during cold weather, but it is absolutely essential to prevent the pump housing and
PVC pipe from freezing. In the event ice may freeze around the pump, remove the pump from the water,
empty it and place it where it cannot freeze.
Problem Possible causes Solutions
e pump does not run. • Power cord unplugged.
• Impeller jammed.
• Plug cord securely into the socket and
check if there is voltage on the line.
• Disconnect the power cord,remove impeller
cover and check if impeller is free to run.
• Check to see if the circuit protector needs
to be reset.
e pump runs but
does not deliver water.
• Water level under the suction
minimum.
• Air bubble in the pump, produced
during the plunge.
• Suction lter clogged.
• Discharge tube clogged or obstructed.
• Stop the pump, do not run the pump dry.
• Add water
• Get the air out by plunging the pump
while in a tilted position and shake it with
the discharge tube open.
• Disconnect the power cord, clean the
pump bottom.
• Disconnect the power cord: take o the
tube and clean it.
e pump stops
running automatically.
e thermal overload protection system
stopped the pump. A foreign object has
jammed the pump.e pump was used
in hot water. e pump ran dry.
Disconnect the power cord, correct the
reason for overheating; then wait until the
pump is cooled, plug the cord and resume
operation.
MD120 & MD180
MD290 - MD1980
6. TROUBLESHOOTING
Before taking any troubleshooting action, disconnect the pump from the power supply by
removing the plug from the socket.
MD 120 - MD 180
MD 290 - MD 1980

Congratulations!
You have purchased a quality pump from Blue umb, Manufacturers of Quality Pond Products.
If you experience trouble with your pump please reference the Troubleshooting section of this manual.
If you are unable to remedy the problem please contact your local Blue umb dealer for further assistance.
IMPORTANT
PLEASE READ BEFORE USING YOUR PUMP
To insure proper operation of your pump and receive maximum life of this product, it is important that you
read the owners manual completely.
BLUE THUMB PUMP INFORMATION
Blue umb products are created by experienced pond professionals. ese multi-purpose submersible
pumps are designed for use in water garden and koi pond ltration systems, and to create waterfalls, streams
and water features.
Mag-Drive models are suitable for pumping clear ltered water, such as when using a Blue umb
Pond Skimmer or when placed inside a pump sock. e temperature of the water being pumped must
never exceed 95 degrees Fahrenheit. Do not pump sewage, inammable, corrosive or explosive liquids
(e.g. petrol, fuel, dilutents), greases, oils, or foodstus.
For Your Safety
e power cord must never be used to carry or move the pump.
e pump should be unplugged before taking any action on the pump including placing it into
or removing it from the water.
If the power supply cord has been damaged, it must be replaced by the manufacturer’s authorized
customer support service in order to avoid all risks.
Installing the pump
• ese pumps can be installed in a pond skimmer or submerged directly into the water.
• e pump must always have water running through it. Running the pump dry will void the warranty.
• Do not place the pump where it can become clogged with debris or gravel. Do not set the pump on the
bottom of the pond to prevent the pump from draining the pond. Monitor the pump regularly to make
sure the intake remains unclogged.
• Plug the pump into a ground fault interrupter (GFCI) protected outlet that is in a dry place, protected
against any risk of ooding. Verify that the power supply voltage and frequency match the specications
on the pump nameplate.
DO NOT cut the cord and direct wire the pump for any reason. Doing so will void the warranty.
Winter Operation
e pump may be run during cold weather, but it is absolutely essential to prevent the pump housing and
PVC pipe from freezing. In the event ice may freeze around the pump, remove the pump from the water,
empty it and place it where it cannot freeze.
Problem Possible causes Solutions
e pump does not run. • Power cord unplugged.
• Impeller jammed.
• Plug cord securely into the socket and
check if there is voltage on the line.
• Disconnect the power cord,remove impeller
cover and check if impeller is free to run.
• Check to see if the circuit protector needs
to be reset.
e pump runs but
does not deliver water.
• Water level under the suction
minimum.
• Air bubble in the pump, produced
during the plunge.
• Suction lter clogged.
• Discharge tube clogged or obstructed.
• Stop the pump, do not run the pump dry.
• Add water
• Get the air out by plunging the pump
while in a tilted position and shake it with
the discharge tube open.
• Disconnect the power cord, clean the
pump bottom.
• Disconnect the power cord: take o the
tube and clean it.
e pump stops
running automatically.
e thermal overload protection system
stopped the pump. A foreign object has
jammed the pump.e pump was used
in hot water. e pump ran dry.
Disconnect the power cord, correct the
reason for overheating; then wait until the
pump is cooled, plug the cord and resume
operation.
MD120 & MD180
MD290 - MD1980
6. TROUBLESHOOTING
Before taking any troubleshooting action, disconnect the pump from the power supply by
removing the plug from the socket.
MD 120 - MD 180
MD 290 - MD 1980

WARRANTY
60-MONTH LIMITED WARRANTY
All Blue umb Mag-Drive pumps are warranted to the user against defective material and workmanship under
normal use for a period of 60 months from the date of purchase by the original purchaser (Provided that your pump
was registered within 60 days of purchase). Replacement liability in all events is limited to replacing or repairing at
Blue umb’s sole discretion of any part or parts which are defective in material or workmanship. Proof of purchase is
required on all claims in the form of invoice copy, sales ticket, etc. Warranty void if pump is not installed as per these
instructions. All pumps returned will be inspected to determine cause of failure before warranty approval.
e warranty and remedy described in this limited warranty is an EXCLUSIVE warranty and remedy IN LIEU
of any other warranty or remedy, expressed or implied, which other warranties and remedies are hereby expressly
EXCLUDED, including but not limited to any implied warranty of MERCHANTABILITY or FINESS for a
PARTICULAR PURPOSE. is warranty gives buyer and use specic legal rights, and buyer and user may also
have other rights which vary from state to state. Some states do not allow the exclusion or limitation of incidental or
consequential damages, so the above limitation or exclusion may not apply to you.
FOR YOUR RECORDS
Please keep receipt in case of warranty service
Date of Purchase________________________
Model number__________________________
Serial Number__________________________
Dealers stamp___________________________
VIEW OTHER GREAT BLUE THUMB PRODUCTS ON-LINE AT WWW.BLUETHUMBPONDS.COM.
Blue Thumb, Inc.
2650 Schust Rd.
Saginaw, MI 48603
Phone: [phone]
www.bluethumbponds.com Models
Mag-Drive 120
Mag-Drive 180
Mag-Drive 290
Mag-Drive 370
Mag-Drive 530
Mag-Drive 660
Mag-Drive 800
Mag-Drive 1110
Mag-Drive 1300
Mag-Drive 1495
Mag-Drive 1980
OWNER’S
MANUAL
Blue umb Pump Specications
* Wattage will vary based on head pressure.
Model Power (Watt) Flow (GPH) Max. Head (Feet) Current (Amp) Cord Length Outlet
MD 120 7 120 2.60 0.08 6 ft ¾ in
MD 180 9.5 180 4.70 0.12 6 ft ¾ in
MD 290 16 290 5.95 0.23 16 ft 1 in
MD 370 24 370 7.60 0.40 16 ft 1 in
MD 530 33 530 7.92 0.55 20 ft 1 in
MD 660 43 660 8.82 0.73 20 ft 1 in
MD 798 58 798 9.30 0.80 20 ft 1 in
MD 1110 92 1110 12.20 0.85 20 ft 1 in
MD 1300 110 1300 13.50 1.00 20 ft 1¼ in
MD 1495 153 1495 16.70 1.46 20 ft 1¼ in
MD 1980 250 1980 20.00 2.60 20 ft 1¼ in
APPROVED
SERENITY SKIMMER CRYSTAL SKIMMER SMALL PUMP SOCK