Blueant X0 User manual

Welcome to the BlueAnt X0 Portable Bluetooth speaker
The BlueAnt X0 speaker is a portable Bluetooth speaker designed to output great
sounding and super loud audio. Featuring multiple input options, your music with
sound better than ever before.To learn how to get the most out of your BlueAnt
X0 please read through this manual.

Power on/off; Bluetooth Indicator
Duo Mode Indicator

Short press button to power on/off the speaker.The indicator light will flash
blue.Each time the speaker powers on it will reset to 50% volume.After 10 mins
with no connection the X0 will automatically power off to conserve battery.
Power on the speaker and enter Bluetooth mode.The light indicator will flash.
On your smartphone search Bluetooth devices for the“BlueAnt X0”.Once
connected the speaker will announce it is “connected”and the indicator light will
cease flashing.

Press and hold for 8 seconds to disconnect the current
Bluetooth connection. The X0 will prompt “disconnected”.
Then other Bluetooth devices can find and pair with the X0.

F) Duo Mode
Dual speaker wireless stereo pairing for wide stereo sound stage.
1. Press the power button on the first speaker to turn the speaker “On”
2. Press and hold the Volume + and Volume - buttons on the first speaker until the
speaker says “Duo Mode pairing” then release the buttons
3. Press the power button on the second speaker to turn the speaker “On”
4. Press and hold the Volume + and Volume - buttons on the second speaker until
the speaker says “Duo Mode pairing” then release the buttons
5. Please wait until one speaker says “Duo Mode connected”. This may take up to 1
minute. The speakers are now connected to each other.
6. The speaker that says “Duo Mode connected” is the master speaker and this is
the speaker that you should pair with your phone.
For Bluetooth pairing search for “BlueAnt X0” on your phone.If you receive a
phone call while in Duo Mode the call will only come through the master speaker.
When in Duo Mode and you Power off one speaker both speakers will power off .
When you Power on the speakers, they need to be turned on individually.
When both speakers are powered on Duo Mode will automatically reconnect
and you will hear “Duo Mode connected”.To disconnect Duo Mode press and
hold Volume + and Volume - until you hear “Duo Mode disconnected”.
To clear Duo Mode pairing press and hold Volume + and Volume - until the
speaker says “Duo Mode cleared”. This takes about 8 seconds.
Assuming direct line of sight, you should achieve be able to achieve a range of
over 40 metres between the two speakers.
When used indoors the range will be affected by internal walls or obstacles
between the speakers.

Use the 3.5mm audio cable included to connect the speaker to an audio
source (PC, MP3/MP4, mobile phone).When you plug the Aux cable into the X0 it
will automatically change to Aux in mode. When you unplug the Aux cable the X0
will change back to Bluetooth mode. The speaker will play the music from the
audio source.
Please use the supplied MicroUSB cable to charge the X0.When the X0 is
charging the power light will flash. When fully charged the light will stay solid.
A full charge will take around 3 hours.Please close the port cover after you have
charged the X0.

WATER wate
wate
-

15
Suite 6, 861 Doncaster Road, Doncaster
East, Victoria, 3109, Australia