Blueant X1 User manual

Welcome to the BlueAnt X1 Portable Bluetooth speaker
The BlueAnt X1 speaker is a portable Bluetooth speaker designed to output great
sounding and super loud audio. Featuring multiple input options, your music with
sound better than ever before.To learn how to get the most out of your BlueAnt
X1 please read through this manual.
Buttons
7
6
9
8
1
2
3
4
5
2

MicroUSB Charge slot – USB cable supplied
Aux in Jack 3.5mm – Aux in cable supplied
1
2
3
4
5
6
7
8
9
Item Button Function
Power button - short press to power on/off
Bluetooth Indicator
Battery Indicator
Volume Up - Short press
Skip forward button - Long press
Play/Pause button-Click to play/pause,
Double Click for SIRI/GOOGLE.
Click to answer/end, Double Click to reject call.
USB Cable AUX In Cable
Microphone
Volume Down - Short press
Skip backward button - Long press
3

Short press button to power on/off the speaker. The indicator light will flash
blue. The speaker has a m emory function mode as prior to power off. Each time
the speaker powers on it will reset to 50% volume.After 10 mins with no
connection the X1 will automatically power off to conserve battery.
Getting started
Power on/off
Modes
Bluetooth Mode
A) Pairing
Power on the speaker and enter Bluetooth mode. The light indicator will flash.
On your smartphone search Bluetooth devices for the “BlueAnt X1”. Once
connected the speaker will announce it is “connected” and the indicator light will
cease flashing.
Click to play/pause
press and hold for 1.5 seconds
To skip back a track
press and hold for 1.5 seconds
To skip forward a track
Click to decrease volume
Click to increase volume
B) Music
4

Click to answer an incoming call
Click to end the active call
Double click to reject an incoming call
or press and hold
Double click to activate/cancel Siri/Google voice dialing.
Press and hold for 8 seconds to disconnect the current
Bluetooth connection. The X1 will prompt “disconnected”.
Then other Bluetooth devices can find and pair with the X1.
C) Calls
D) SIRI/GOOGLE
E) Disconnect
5

F) Duo Mode
Dual speaker wireless stereo pairing for wide stereo sound stage.
1. Press the power button on the first speaker to turn the speaker “On”
2. Press and hold the Volume + and Volume - buttons on the first speaker until the
speaker says “Duo Mode pairing” then release the buttons
3. Press the power button on the second speaker to turn the speaker “On”
4. Press and hold the Volume + and Volume - buttons on the second speaker until
the speaker says “Duo Mode pairing” then release the buttons
5. Please wait until one speaker says “Duo Mode connected”. This may take up to 1
minute. The speakers are now connected to each other.
6. The speaker that says “Duo Mode connected” is the master speaker and this is
the speaker that you should pair with your phone.
For Bluetooth pairing search for “BlueAnt X1” on your phone.If you receive a
phone call while in Duo Mode the call will only come through the master speaker.
When in Duo Mode and you Power off one speaker both speakers will power off .
When you Power on the speakers, they need to be turned on individually.
When both speakers are powered on Duo Mode will automatically reconnect
and you will hear “Duo Mode connected”.To disconnect Duo Mode press and
hold Volume + and Volume - until you hear “Duo Mode disconnected”.
To clear Duo Mode pairing press and hold Volume + and Volume - until the
speaker says “Duo Mode cleared”. This takes about 8 seconds.
Assuming direct line of sight, you should achieve be able to achieve a range of
over 40 metres between the two speakers.
When used indoors the range will be affected by internal walls or obstacles
between the speakers.
6

Click to mute play back
Click to decrease volume
Click to increase volume
Aux in Mode
Use the 3.5mm audio cable included to connect the speaker to an audio
source (PC, MP3/MP4, mobile phone).When you plug the Aux cable into the X1 it
will automatically change to Aux in mode. When you unplug the Aux cable the X1
will change back to Bluetooth mode..The speaker will play the music from the
audio source.
To change or control tracks please use your music source when in Aux in mode.
Charging
Please use the supplied MicroUSB cable to charge the X1. A full charge will take
around 3 hours.Please close the port cover after you have charged the X1.
7

LEGALS
Please protect yourears. BlueAnt devices can reach volumes above 100 decibels.
Prolonged use at high volumes may affect your hearing capacity and may result in
noise induced hearing loss (NIHL). Please read the enclosed safety card for
information about the safe use of BlueAnt products. The Bluetooth ® word mark and
logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such
marks by BlueAnt Wireless is under license. Google Now is a trademark of Google
Inc., Siri is a trademark of Apple Inc., registered in the U.S. and other countries.
BlueAnt and other trademarks are trademarks of BlueAnt and other organizations
and may not be used without permission. The BlueAnt logo is registered in the U.S.
Patent and Trademark Office and globally with the World Intellectual Property
Organization under the Madrid protocol.
SPLASHPROOFThe BlueAnt X1 features an IPX6 rating making it splashproof.
For help and support visit:support.blueantwireless.com
Register your Burleigh for updates: register.blueantwireless.com
By using this product you agree to the terms and
conditions listed on the BlueAnt website: www.blueantwireless.com
The X1 is only splashproof when the port cover is closed
SUPPORT
8

PROLONGED USE AT HIGH VOLUMES MAY AFFECT YOUR HEARING
CAPACITY AND MAY RESULT IN NOISE INDUCED HEARING LOSS (NIHL).
TURN OFF THE POWER TO YOUR DEVICE WHEN NOT IN USE.
SAFETY INFORMATION AND WARRANTY TERMS
Important Safety Information
PLEASE READ THIS ENTIRE DOCUMENT CAREFULLY, BECAUSE IT
CONTAINS IMPORTANT INFORMATION ABOUT THE SAFE USE OF
BLUEANT DEVICES
WARNING - PROTECT YOUR HEARING
BLUEANT DEVICES CAN REACH VOLUMES ABOVE 100 DECIBELS.
9

Please ensure that the device and any associated components such
as ear gels or chargers are stored safely and that any packaging or
unwanted contents are disposed of thoughtfully. Do not place the
product on the floor or leave it in a place where young children could
access it, or someone could trip over it.
Using Ear Gels
Your BlueAnt headset will come with ear gels or foam tips that are designed to provide a
secure fi t in your ear while providing high quality audio.
Ear gels and tips are designed to sit comfortably in your ear and should not be forced into your
ear at any time. If
you have trouble fi tting the ear gel or foam please refer to the owner’s manual for correct
insertion and usage information. Always make sure that the ear gel or foam is fi tted securely
to your device before placing it in your ear.
WARNING
NOTE THAT NON- COMPLIANCE, MISUSE OR FORCING
THE EAR GEL OR FOAM MAY CAUSE DAMAGE TO YOUR
EAR CANAL OR EARDRUM, OR MAY OTHERWISE CAUSE
BODILY HARM
10

Smart Practices While Driving
Check the laws and regulations on the use of mobile devices and
accessories such as your BlueAnt device in the areas where you
drive. Always obey them
DO NOT USE MOBILE DEVICES AND ACCESSORIES IN AREAS
WHERE THEIR USE IS PROHIBITED. ENSURE THAT YOUR USE
COMPLIES WITH ANY RESTRICTIONS.
• Your BlueAnt device lets you communicate by voice when
wireless service is available and safe conditions allow.
When driving a car, driving is your fi rst responsibility.
• If you choose to use your Bluetooth device while driving,remember the following
tips :
• Get to know your BlueAnt device and its features such as speed dial and redial.
These features help you to place your call without taking your attention off the road.
• If you receive an incoming call at an inconvenient time, let your voice mail answer
it for you.
• Let the person you are speaking to know you are driving; if necessary, suspend
the call in heavy traffi c or hazardous weather conditions. Rain, sleet, snow, ice, and
heavy traffi c can be hazardous.
• Do not take notes or look up phone numbers while driving . Remember that your
primary responsibility is driving safely.
11

• Do not engage in stressful or emotional conversations that may be distracting.
Make people you are talking to aware you are driving and suspend conversations
that can divert your attention away from the road.
• In the case of fi re, traffi c accidents, medical or other serious emergencies,
dial the local emergency number.
• Call roadside assistance or a special non-emergency wireless assistance number
when necessary.
Care and Handling
Your BlueAnt Bluetooth device is a precision engineered instrument.To ensure its
ongoing performance, you should look after it as you would any quality consumer
electronic product, and use it in accordance with the instructions. BlueAnt
recommends that you take the following precautions. Avoid leaving your device in
direct sunlight, such as on the dashboard
• or console of a car or truck. Do not leave your device unattended in your vehicle.
• Do not leave your device, or use your device, in any area where the temperature
may exceed 60 degrees Centigrade (140 degrees Fahrenheit), such as inside a
closed car on a hot day.Remember that on a hot day the temperature inside a
closed car may be signifi cantly higher than the outside air temperature.
• Do not leave your device, or use your device, in any area where the temperature is
likely to drop below 0 degrees Centigrade (32 degrees Fahrenheit).
• Do not leave your device, or use your device, in any area exposed to humidity, dust,
soot, other foreign objects, smoke, or steam as this may cause your device to
malfunction.
12

• Do not use any household or industrial grade detergents or cleaners to clean your
device. If your device becomes dirty or smeared, in most instances a wipe with a
dry or slightly damp cloth should be suffi cient to clean it.
• Do not leave your Bluetooth device plugged into a wall or carcharger for long
periods after it is fully charged. BlueAnt does not recommend long periods of
continued charging.
• Before charging your BlueAnt device, make sure that the AC outlet, adaptor and
cable are not damaged. If you notice any abnormalities, seek advice from a
qualifi ed professional.
• If traveling internationally, ensure that your BlueAnt wall or car power adapter is
approved for use in the country where you plan to use it and hat the adapter
voltage is suited to the local power supply.
• Should a fault develop with your BlueAnt product, contact BlueAnt for advice on
how to proceed. Do not attempt to repair or alter any BlueAnt product yourself.
Approved Accessories
The use of accessories not approved by BlueAnt, including but not limited to
batteries, antennas, wall adapters, car chargers, ear gels and foam tips and
convertible covers, may cause your BlueAnt device to malfunction or in the case of
non-approved electrical accessories may cause the device to exceed RF energy
exposure guidelines. Use of non approved accessories will void your device’s
warranty. For a list of approved BlueAnt accessories, visit our website at: www.
blueantwireless.com
13

Electromagnetic Interference
Nearly every electronic device is susceptible to electromagnetic interference (EMI)
if inadequately shielded, electromagnetic confi gured for electromagnetic
compatibility. Similar to a mobile phone, your BlueAnt device is a low power
transmitter / receiver and is covered by regulations pertaining to such devices.
Turn off your BlueAnt device in any facility where posted notices instruct you to
do so. These facilities may include hospitals or health care facilities that may be
using equipment that is sensitive to external RF energy.
• When instructed to do so, turn off your BlueAnt device when on board an aircraft.
Any use of a mobile device must be in accordance with applicable laws, regulations
and airline crew instructions.
• Some Bluetooth devices may interfere with some hearing aids. In the event of
such interference, you may want to consult your hearing aid manufacturer or
physician to discuss alternatives.
• If you use any other personal medical device, consult the manufacturer of your
device to determine if it is adequately shielded from RF energy. Your doctor or
physician may be able to assist you in obtaining this information.
• If you are in doubt about whether your BlueAnt device be safely turned on or used,
please consult an authorized person in the location you want to use your BlueAnt
device. If no authorized person is available or you remain uncertain, BlueAnt
recommends that you turn off your Bluetooth device and any mobile phones
unless they are required in an emergency situation.
Recycling Bluetooth Accessories
Do not dispose of Bluetooth accessories, such as chargers or headsets, with your
household waste. In some countries or regions,collection systems are set up to
14

AUSTRALIAN CONSUMER LAW
Our goods come with guarantees that cannot be excluded under the
Australian Consumer Law. You are entitled to a replacement or refund
for a major failure and compensation for any other reasonably
foreseeable loss or damage. You are also entitled to have the goods
repaired or replaced if goods fail to be of acceptable quality and the
failure does not amount to a major failure.
For warranty and technical support please visit
www.blueantwireless.com
or call 1300 669 049
BlueAnt Wireless,
Suite 6, 861 Doncaster Rd, Doncaster East, Victoria 3109,
Australia
handle electrical and electronic waste items, and may prohibit or restrict how such
items are disposed of. Check he laws and regulations for your areas to determine
how to properly dispose of such items. Contact your regional authorities for
more details. If collection systems are not available, please return unwanted
accessories to any BlueAnt Approved Service Center for your region.
BlueAnt Limited Global Warranty
15
This product is covered by BlueAnt’s limited global warranty for one (1) year from
the date of purchase by the fi rst consumer purchaser of the Product. Please refer
to warranty.blueantwireless.com for full terms and conditions.
THANK YOU FOR CHOOSING A BLUEANT PRODUCT.