BLUELIGHT PAR-OUTDOOR24X8W User manual

LED outstage 2408 RGBW(4 in 1)
Cautions
1. The unit must only be operated by professional lighting engineer or electrician in accordance with the
Safety requirements of the Chinese People’s Republic of operation and installation.
2. Operate strictly with the above instructions, please do not disassemble or repair by yourself. Failure to
professionals repair and maintenance has to buy my factory original parts or the corresponding parameters
of the electronic parts.
3. Fixed installation and prevent being strong vibration or impact.
4. Before connect the power, make sure that power supply good ground, then tighten the electrical components
to avoid electric shock.
5. There are no serviceable parts inside, please do not open it.
6. Transport again, please note shockproof, the best use of the original.
Warnings
1. During installation and maintenance work, please verify that the power cut off.
2. Keep combustible materials and lighting from distance above 0.5meters.
3. The lights on the power requirements of 100-240V, 50-60Hz. If beyond this range, recommended regulator
device, otherwise it will seriously affect life span.
Installation
1. Before installation, please make sure the power supply is in line with lamps required.
2. Please install by the professionals, fix safely and adjust to suitable beam angle.
When installing this equipment, make sure that within 0.5m range there is no extreme and explosive items,
lamps and wall partitions with the distance of above 15cm.
Maintenance
Keep the equipment with Regular maintenance and repair. Due to long-term use of lighting, the light exit lens
surface of dust, air humidity, reducing the lamp output power, resulting in damage to electrical parts. Please use
a damp cloth and water to clean the lens surface, do not use organic detergent by a professional electrician or
lighting of the user. The period of maintenance is subject to three months.
Technical specification
Output
Lux@2m 10200Lux
Lux@4m 2520 Lux
Lux@6m 1090 Lux
Lux@8m 620 Lux
Lightsource LED Qty 24*4 in1 Drive current 700mA
Color range 16.7 million
Electricity
Input voltage
10
0～240VAC
Power 158W
Control On-board control 4 display
Control protocol
DMX512
Channel mode
8CHs
Optical system Dimmer 0～100%
Beam Angle 25°（15°/30°/50°Optional）
Housing Weight 7.8kg

Size and material 485*250*213mm, die-cast aluminum
Anti-dust lens
Tempered glass
Lighting connection Signal cable in/out Power cable in/out
Lighting connection Qty AC 220V:20pcs AC110V:10pcs
Cooling system
Convective heat transfer
Optical spare parts
Barndoor
（
Indoor
）
Signal cable tieline5/10/15/20M
Signal cable tieline 5/10/15/20M
Safety and
certification
Certification CE and IP65
Application Environment Anti-dust,anti-wet/IP65
Working Environment -40℃～45℃（Operation）
-40℃～45℃（Start up）
Lux
Operating instruction
1. We have MENU,UP,DOWN,ENTER four buttons
2. Four digital display，dormant state after one minute working
3. Dimmer manual mode,running,strobe,speed adjustable,adjust the data with a power saving,boot
automatically recover data
1）Auto function:
1. MENU is a function key,press UP,DOWN key in turn,and LCD circulate to display “Addr、rL--、gL--、
bL--、oL、FLAS、ASC-、CE--、FAdE”.
2. Addr: DMX function,press ENTER key to display AXXX,and press UP data to increase,press DOWN data
to reduction,long press UP or DOWN can be quickly adjusted,XXX for DMX address.
3. rL-- is a Red dimmer,press ENTER key to display rLXX,press UP data to increase,press DOWN data to
reduction,16 series dimmer: rL00—rL15,larger series,the higher the brightness.
4. gL -- is a Green dimmer,press ENTER key to display gL XX,press UP data to increase,press DOWN data
to reduction,16 series dimmer: gL 00—gL 15,larger series,the higher the brightness.
5. bL -- is a Blue dimmer,press ENTER key to display bL XX,press UP data to increase,press DOWN data to

reduction,16 series dimmer: bL 00—bL 15,larger series,the higher the brightness.
6. oL -- is a white dimmer,press ENTER key to display oL XX,press UP data to increase,press DOWN data
to reduction,16 series dimmer: oL 00—oL 15,larger series,the higher the brightness.
7. FLAS: RGB Flash,press ENTER key to display FL XX,press UP data to increase,press DOWN data to
reduction,16 speed series: FL 00—FL 15,larger series,the faster.
8. ASC-：Seven colors running,press ENTER key to display AS XX,Press UP data to increase,press DOWN
data to reduction,16 speed series:AS 00-AS 15,larger series,the faster.
9. CE--：Chasing way,press ENTER key to display CE XX,press UP data to increase,press DOWN data to
reduction,16 ways for chasing.
10. F AdE：Fade in fade out,press ENTER key to display FA XX,press UP data to increase,Press DOWN data to
reduction,16 speed series: FA 00-FA 15,larger series,the faster.
2) Master/Slave Function
Of lights connected with the signal power, there is an automatic function of light, other light is
DMX-controlled function, entered the master-slave function. DMX-controlled function light will follow
automatic function of the light to run the same function.
3)3) DMX mode 1: 3 Channels
DMX mode 2: 4 Channels
DMX mode 3: 8 channels(CH8:when 0-5, CH1, CH2, CH3,CH4, CH5,CH6, CH7 will run)
CH1 0-255 red dimmer
CH2 0-255 green dimmer
CH3 0-255 blue dimmer
CH1 0-255 red dimmer
CH2 0-255 green dimmer
CH3 0-255 blue dimmer
CH4 0-255 White dimmer
CH1 0-255 Main dimmer
CH2 0-255 Red dimmer
CH3 0-255 Green dimmer
CH4 0-255 Blue dimmer
CH5 0-255 White dimmer
CH6
1-14：pure white 15-29：White 30-44：light blue 45-59：Blue 60-74：Purple
75-89
：
Bluish violet 90-104
：
reddish violet 105-119
：
peach blossom
120-134：pink 135-149：red 150-164：orange
165-179：yellow 180-194：lime 195-209：light green 210-224：green
225-239：bluish green 240-254：cyan

CH7 0-255 strobe peed from slow to fast(grey scale is
set by CH1, CH2, CH3,CH4,CH5 and CH6)
CH8 6-240 gradual change speed from slow to fast;
241-254 Running
255 off