blueLOGIC BT-MB01 User manual

Version02.12.2010
blueLOGiC®hands-freekit
BT-MB01
forMercedesBenzwithMOST®
and withoutfactorytelephone
Bluetooth®-hands-free phonekitfullyintegratedinthevehicleinfotainment
www.eldibg.com
car audio & multimedia system

Version02.12.2010BT-MB01
page2
Contents
1. Priortoinstallation
1.1.Deliverycontents
1.2.Checkingthecompatibilityofvehicleandaccessories
2. Installation
2.1.Removalofnavigation/radiounit
2.2.Connections
2.3.Activationoftheinterface
3. Interface operation
3.1.PairingtheblueLOGiC®interface withamobilephone
3.2.Loadingofphonebook
3.3.Setup,factorydefaults,update
3.4.A2DPaudiostreamingthroughCD-changeremulation
4. Specifications
5. Technicalsupport
Information
Changesofthevehiclesoftwarecancausemalfunctionsoftheinterface.Weofferfree
software-updatesforinterfacesforoneyearafterpurchase.Toreceiveafreeupdate,the
interfacemustbesentinatowncost.Laborcostforandotherexpensesinvolvedwiththe
software-updateswillnotberefunded.
Productfeatures
Integrationinandcontrolsthroughthetelephoneportofthefactoryinfotainment
UpdatableParrotchipsetwithbestaudioqualityand highphonecompatibility
Automaticradiomute
Calleraudiothroughvehiclesound-system
Externalmicrophonewithamplificationadjustment throughinfotainment
A2DPaudiostreamingthroughCD-changeremulation(requirement:mobilephone
supportsfunction,factoryCD-changercodedbutnotinstalled)
up to10 mobilephonescanbepairedsimultaneously
Useoffactory/vehiclebuttonstocontrolphonefunctions
Mobilephonebookintegration(about1000call numbers)
Audioadjustment andsettings throughvehicleinfotainment
SMSreadingandwritingifsupportedbymobilephone
www.eldibg.com
car audio & multimedia system

Version02.12.2010BT-MB01
page3
Requirements
VehicleMercedesBenzwithMOST®
CLS-Coupe(W219)from10/2004tilabout04/2008,E-class
(W211)tilabout 04/2008,SLK-class (R171) from03/2004
til about 04/2008,A-class (W169),B-class (W245),C-class
(W203),CLK-class (C209,W209),GL-class(X164),ML-class
(W164)all years,R-class (W251),Sprinter,Viano,andman
more
Navigation/RadioNavigations system ComandAPSNTG1andNTG2
Radiosystem Audio5APS,Audio20 +APS50
Fibre opticalring Onvehicleswithoutfibreopticalcomponent,thefibre
optical ringneedstobeactivatedbydiagnosiscomputer
and thehead-unitneedstobecodedtotelephone.
Steeringwheel/display To additionallyenablethephonefunctionsthroughthe
steeringwheelcontrolsandthedisplayintheinstruments,
codingwithdiagnosiscomputerisnecessary
Limitations
Factorytelephonekitmustberemovedifinstalled
FactoryCD-changer factoryCD-changermustmustNOTbe installed,ifA2DP
shallbeused
1. Priorto installation
Readthemanualpriortoinstallation.Technicalknowledgeisnecessaryforinstallation.The
place ofinstallationmustbefreeofmoistureandawayfromheatsources.
1.1. Deliverycontents
1.2. Checkingthecompatibilityofvehicleand accessories
HW________ SW________
TakedowntheSW-versionand HW-versionoftheinterfaceand store thismanual
forsupport purposes.
www.eldibg.com
car audio & multimedia system

Version02.12.2010BT-MB01
page4
2. Installation
Switchoff ignitionanddisconnect the vehicle’s battery! The interface needs a
permanent12Vsource.Ifaccordingtofactoryrulesdisconnectingthebattery
isto beavoided,itis usuallysufficienttoputthevehicleis sleep-mode.In
case thesleep-modedoesnotshowsuccess,disconnectthebatterywitha
resistorlead.
Ifpowersource is nottakendirectlyfromthebattery,theconnectionhas tobe
checkedforbeingstart-upprovenandpermanent.
2.1. Removal ofnavigation/radiounit
Theinterface isinstalledonthebacksideofthenavigation/radiounitwhichmustbe
removedforinstallationoftheinterface.
2.2. Connections
UnplugtheQuadlocksocketfromthebacksideofthe
navigationcomputer.
Unplugthecompartment withthefibreopticsfromthe
Quadlocksocket.
Exchange the shells of the vehicle harness’ fibre optical
connector and interface harness’ fibre optical
connectoragainsteachother.
Information
Ondeviceswithexternalaudio
gateway,e.g.NTG1,thefibre
opticalconnectorcanbefound
asseparateconnectoronthe
device’s backside.
AUDIO20
COMANDAPS50
COMANDNTG1
COMANDNTG2
Interface
Connector
Vehicle
Connector
www.eldibg.com
car audio & multimedia system

Version02.12.2010BT-MB01
page5
Connect the vehicle harness’ fibre optical
connectortothefibreopticalsocketofthe
interface harness.
Connect the interface harness’ fibre optical
connectortotheQuadlocksocketofthe
vehicleharness.
PlugtheQuadlocksocketbackintothe
navigationcomputer.
Connectredand blackwiretopermanent+12V
source.Connectblueto+12VtoenableCD-
changeremulationforA2DP.A2DP
requirementisthatthefactoryCD-changeris
NOTinstalled.
Installthemicrophoneclosetothedriver.Connectthemicrophones2PinAMPjacktothe
2PinAMPjackbushoftheblueLOGiC®harness.
2.3. Activationoffibreoptical ringand interface
Ifthevehiclehasnofibreopticalcomponentinstalled,thefibreopticalringisnotactivated.
Inthiscaseitneedstobeactivatedbydiagnosiscomputerandthehead-unitneedstobe
codedtotelephone.
To enablethedisplayintheinstrumentsandthesteeringwheelbuttonsfortelephone
functions,itisnecessarytoactivatetheinstrumentstelephonemenubydiagnosiscomputer.
Afterfirstinstallationthevehiclemustgointosleep-modeinordertorecognizethenewly
attachedhardware.
Afterre-connectingthebattery,lockthevehicleand waitfor5-10 minutes.
Wirecolor
Definition
●Black
Ground
●Red
+12VDC(permanent)
●Blue
to+12V=CDC-emuon
InternerAudio-Gateway
ExternerAudio-Gateway
www.eldibg.com
car audio & multimedia system

Version02.12.2010BT-MB01
page6
3. Interfaceoperation
Theinterface enablesthetelephonebusofthefactorynavigationsystem.Thereforein
principal,theoperationisanalogueasdescribedinthemanualofthenavigationsystem.
3.1. PairingtheblueLOGiC®Interface withamobilephone
Upto10mobilephonescansimultaneouslybepairedwiththeblueLOGiC®interface.Ifa
11th phoneispaired,theoldestentryisautomaticallydeleted.Insome cases,itbecomes
necessarytoputthevehicleinsleepmodetoenablecorrectfunctionofthe11th phone.
Forpairing,enablethepairingmodeofthemobilephone
(seemanualofthemobilephone).Searchwiththe
mobile phone for „blueLOGiC“ or„CK5050N“ and connect
with activation code „1234“. Some mobilephonestryto
connecttotheblueLOGiC®interfacewithanotherfunction
as"handsfree".Checkthisattitudeand switchtheadjustment
to"handsfree"ifnecessary(seemanualofthemobilephone).
IfamobilephonehadbeenpairedtotheblueLOGiC®interface (requirementisanoccurred
pairingwithamobilephone,seeabove),aconnectionwillbeautomaticallyestablishedas
soonasthemobilephoneisinreach.Ifmultiplepairedmobilephonesaresimultaneouslyin
reach,theblueLOGiC®interface willbeconnectedtothefirstphone.
Ifyouhaveconnectionproblemsbetweenmobilephoneand theblueLOGIC,first check at
theparrotwebsitewhetheranupdatefortheparrotchipisavailable.Thepartnumberof
theparrotchipcanbefound inthespecificationsattheend ofthemanual.
3.2. Loadingofphonebook
Aftereachestablishment ofconnectiontothemobilephone,thephonebookofthemobile
phonewillbeloadedtothevehicleinfotainment.
Depending on the mobile phone either it will be loaded from the phone’s memory or the
SIMcard.Thisprocesscantakeafewminutes.Ifthephonebookisnoornotcompletely
loaded,itmightbenecessarytocopythecontactsfromtheSIM-cardtothemobilephone
memory!
Some mobilephonesdonotautomaticallyloadthephonebooktotheinfotainment,butthe
sendingmustbemanuallyinitiated(theprocedurevariesdependingonthemobilephone,
z.B. “send phone book to Bluetooth”).
The manual procedure must be repeated for refreshment if the mobile phone’s contacts
havebeenedited.
ThememoryofblueLOGiC®interface cansaveabout1000 callnumbers.
www.eldibg.com
car audio & multimedia system

Version02.12.2010BT-MB01
page7
3.3. Setup,factorydefaults,update
Settings oftheblueLOGiC®interface canbechangedbydialingcertaincodesinthevehicle
telephonemode.Calleraudiovolume,Ringingtonevolumeandmicrophonesensitivity
canbeadjustedseparately.Theinterface canberesettofactorydefaultsandupdatesofthe
Parrotchipsetcanbeinitiated.
To executeafunction,justdialthecorrespondingcodefromthebelowtablelikeaphone
numberandconfirm with “pick-up”.
Function
Codeno.
Min
Max
Microphonesensitivity
+001xx
01
15
Calleraudiovolume
+0021xx
01
15
Ringingtonevolume
+0022xx
01
15
Factorydefaults
+009
ParrotUpdateMode
+000
To thecodesforvolume andsensitivityitisnecessarytoaddtwodigitsforthedesiredvalue
(01 min. to 15 max.). For example dial “+002112” to set the caller audio volume to level 12.
Afterdialinga code, the navigation will confirm with “call failed”.
System updatesoftheParrotchipsetarepossiblethroughBluetooth®viaPC.
3.4. A2DPaudiostreamingthroughCD-changeremulation
WhentheCD-changeremulationoftheblueLOGiC®interfaceisentered,itispossibleto
listentomusicfilesonthefactorysoundsystem whichareplayedbythemobilephone.The
availableoptionstocontroltheplayfunctionsofthemobilephonedependverymuchon
themobilephone,forexampleiPhones®donotsupportanytrackskipping.Full functions
arestartingandstoppingtheplayback,nexttrackandprevioustrack.
IfthevehicleCD-changer mode of the vehicle’s navigation/radio system is activated, the
A2DPplaybackisautomaticallystarted.WhentheCD-changermodeisexited,theA2DP
playbackisstopped.Theplaybackispausedduringphonecallactivity.Trackskippingis
possible with the “next” and “back” keys of the steering wheel or the head-unit.The
playback can manually be stopped or resumed by pressing the “SCAN” button.
ThevolumeleveloftheA2DPcanbeadjustedinthemobilephonessettings.
www.eldibg.com
car audio & multimedia system

Version02.12.2010BT-MB01
page8
4. Specifications
IntegratedBluetooth®ChipParrotCK5050new
Operationvoltage10.5–14.8VDC
Stand-bypowerdrain<1mA
Operationpowerdrain120mA
Powerconsumption1.8W
Temperaturerange-30°Cto+80°C
Weight95g
DimensionsBxHxT106 x30x71mm
Legaldisclaimer:Mentionedcompany-andtrademarks,aswellasproductnames/codesareregistered
trademarks®oftheircorrespondinglegalowners.
www.eldibg.com
car audio & multimedia system