BlueSky Designs Mount'n Mover DP-T1 User manual

Product: DP-T1, Tobii
Weight: 5.8 oz. (0.16 kg)
mountnmover.com 1-888-724-7002 (toll free) or 1-612-724-7002 pg 1 of 5
Attaches to:
Tobii C8, C12, CEye (eyegaze),
P10, LightWriter SL40, S32
6 1/2 "
4"
Device (C8,
C12, CEye)
to device
plate
Quick release
plate (QRP) to
device plate
8-32 x 1/4” (x4)
1/4” x 11/16” spacer, aluminum (x4)
M4-.7 x 25mm (x4)
Device (P10,
S32, and
Lightwriter) to
device plate
M4-.7 x 10mm (x4)
( 102 mm)
(165 mm)

mountnmover.com pg 2 of 5
Attach QRP
C8
C12 x4
8-32 x 1/4”
Remove “kick-stand” plate
Save the screws
Leave stand in place
as a spacer on C8 and C12
Attach device plate DP-T1 with
existing “kick-stand” plate screws
C12
C8
Attach device plate DP-T1
Plate removed Attach QRP

Attach
QRP
C12 with cEye (eyegaze)
Remove “kick-stand” plate
Save the screws
x4
8-32 x 1/4”
mountnmover.com pg 3 of 5
Attach device plate with
existing “kick-stand”
plate screws
Attach DP-T1
Plate removed

x4
8-32 x 1/4”
mountnmover.com pg 4 of 5
Remove any mounting
hardware that may be
attached to the device.
x4
M4-.7 x 10mm
ATTACH DP-T1 ATTACH QRP
*
P10

LightWriter SL40
x4
8-32 x 1/4”
mountnmover.com
x4
M4-.7 x 10mm
The back of the
device should
look like this
pg 5 of 5
The back of the
device should
look like this
S32
Attach Tobii
device plate
(DP-T1)
Attach quick
release plate
(QRP)