BlueSky Designs Mount'n Mover DP-T2 User manual

Product: DP-T2, Tobii
Weight: 10.2 oz. (0.289 kg)
mountnmover.com 1-888-724-7002 (toll free) or 1-612-724-7002 pg 1 of 3
Attaches to:
Device plate
DP-T2 to
device
Quick release
plate (QRP) to
DP-T2
8-32 x 3/8” (x4)
M4-.7 x 10 mm (X3)
Devices I-12 and I-15
3.5”
(88.86 mm)
3.315”
(134.82 mm)
8.824”
(224.129 mm)
Foam

mountnmover.com pg 2 of 3
Tobii I Device Plate Attachment Instructions
Place your Tobii face down. Remove the existing plate. Plate removed
12
34
Place the DP-T2 plate on the device so the two hooks t into the grooves at the base of the device (see image below left) and the
three countersunk holes on the plate align with the three holes on the device where you just removed the original plate (see image
below right).
Attach device plate to your Tobii 1 using the screws from the baggie labeled “DP-T2 to Device” (see image 4).
DP-T2 to Device
Grooves
in device

8-32 x 3/8”
mountnmover.com pg 3 of 3
Attach the Quick Release Plate (QRP)
(x4)
Tobii I device mounted
to Mount’n Mover with
the quick release plate
Attach the QRP to the device plate
using the screws from the included
bag labeled “QRP to DP-T2
Available option using the
Universal Rotator (DP-UR)
in addition to the QRP.
Nylon spacers included
with DP-UR.