BlueSky Designs Mount'n Mover DP-T4 User manual

Product: DP-T4, Tobii
Weight: 2.0 oz. (0.056 kg)
mountnmover.com 1-888-724-7002 (toll free) or 1-612-724-7002 pg 1 of 2
Attaches to:
Device plate
DP-T4 to
device (I-110)
Quick release
plate (QRP) to
DP-T4
8-32 x 3/8” (x4)
M4-.7 x 8 mm (X2)
Tobii Dynavox I-110
3.5 inches
3 inches
DP-T4
75 mm spacing

mountnmover.com pg 2 of 3
Remove back plate and stand from device Attach DP-T4 to the back of the Tobii I-110. Use
screws provided with the DP-T4 (M4-.7 x 8mm) x2
DP-T4
Attach the QRP (Quick Release Plate)
to the DP-T4 plate with the screws
provided with the DP-T4 (8-32 x 1/4”) x4
You can locate the Tobii device higher or lower on the
Quick Release Plate depending on your preference
Instructions:
For use with the QRP
(Quick Release Plate)
QRP
12
345

mountnmover.com pg 3 of 3
Instructions:
For use with the QCR
(Quick Connect Receiver) Follow previous
instructions #1 and #2
Attach the DP-QCP (Quick Connect Plate)
to the DP-T4 plate. Use the screws that
came with the DP-T4 plate (8-32 x 1/4”) x2
3 4
Slide the Quick Connect Receiver (QCR)
onto the Quick Connect Plate (QCP) until
it “clicks”