Bluestream W-PR001BT User manual

BLUETOOTH CLOCK RADIO
Model: W-PR001BT
PLEASE READ THIS USER MANUAL COMPLETELY BEFORE
OPERATING THIS UNIT AND RETAIN THIS BOOKLET FOR
FUTURE REFERENCE.
For technical assistance or troubleshooting please
call 1-855-719-8324 or visit www.sibrandssupport.com

WARNINGS
•To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.
•To reduce the risk of electric shock, do not open the cabinet. No user serviceable parts are inside.Refer
servicing to qualified personnel.
•This appliance uses a Laser System. To prevent direct exposure to the laser beam do not open the cabinet.
Visible and invisible laser radiation is present when the cabinet is open.Avoid direct exposure and do not stare
into the beam.
•Batteries should not be exposed to excessive heat such as direct sunlight, fire, or other heat sources.
•Caution: Do not expose this appliance to dripping or splashing liquids. Do not put objects filled with liquid, such
as vases on or nearthe appliance.
•Caution: To turn this appliance off completely, the POWER cord must be unplugged from the wall outlet. The
power cord must be easily accessible at all times.
THE LIGHTNING FLASH WITH
ARROWHEAD SYMBOL, WITHIN
AN EQUILATERAL TRIANGLE,
IS INTENDED TO ALERT THE
USER TO THE PRESENCE OF
NON-INSULATED "DANGEROUS
VOLTAGE" WITHIN THE
PRODUCT'S ENCLOSURE THAT
MAY BE OF SUFFICIENT
MAGNITUDE TO CONSTITUTE
A RISK OF ELECTRIC SHOCK
TO PERSONS.
CAUTION
DO NOT OPEN
WARNING:TO REDUCE THE
RISK OF ELECTRIC SHOCK, DO
NOT REMOVE THE FRONT OR
REAR COVER. NO USER
SERVICEABLE PARTS ARE
INSIDE. REFER SERVICING TO
QUALIFIED SERVICE
PERSONNEL.
THE EXCLAMATION POINT
WITHIN AN EQUILATERAL
TRIANGLE ISINTENDED TO
ALERT THE USER TO THE
PRESENCE OF IMPORTANT
OPERATING AND MAINTENANCE
(SERVICING) INSTRUCTIONS IN
THE LITERATURE
ACCOMPANYING THE
APPLIANCE.
FCC WARNINGS
IMPORTANT SAFETY INSTRUCTIONS
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance withthe manufacturer's instructions.
8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with
one widerthan the other. A grounding type plug hastwo blades and a third grounding prong. The wide blade
and/or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
10) Protect the POWER cord from being walked on or pinched particularly at plugs, convenience receptacles, and
the point where they exit from the apparatus.
11) Only use attachments/accessories specified by the manufacturer.
12) Use only withthe cart, stand, tripod, bracket, or table specified by the manufacturer, or sold
withthe apparatus. When a cart is used, use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
13) Unplug this apparatus during lightning storms or when unused for long periods of time.
14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in
any way, such as POWER-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
S3125A
2
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may cause undesired operation.
THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY
UNAUTHORIZED MODIFICATIONS OR CHANGE TO THIS EQUIPMENT. SUCH MODIFICATIONS OR
CHANGE COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.

LOCATION OF CONTROLS
1. FUNCTION button
7. NEXT / MINUTE button
2. CLOCK / MEMORY button
8. SNOOZE button
3. VOLUME DOWN / ALARM-1 button
9. LED Display
4. SLEEP button
10. Battery Door
5. VOLUME UP / ALARM-2 button
11. AC Power Cord
6. PREV / HOUR button
• AC 120V~60Hz to DC 6V 0.4A
3
NOTE:Some buttons have multiple functions based on if the function requires a
“Press” (Press & Immediately Release the button) command or a “Press & Hold”
(Press & Hold the button for 1-2 seconds) command.

SETTING THE TIME
NOTE: Before setting the TIME make sure all of the non-clock functions (BLUETOOTH, FM,
AM) are turned OFF. If any of the non-clock functions are playing, turn the function OFF by
simply pressing & holding the FUNCTION button (1).
1. Press & hold the CLOCK / MEMORY button (2) until the time flashes on the LED
display. Once the time is flashing you can release the CLOCK / MEMORY button (2).
2. Press the PREV / HOUR button (6) repeatedly until the correct HOUR is shown on
the LED display.
•NOTE: The “AM” Indicator Light (A) will turn ON when the hour is set to AM.
For PM hours the “AM” Indicator Light (A) will turn OFF.
3. Press the NEXT / MINUTE button (7) repeatedly until the correct MINUTE is shown
on the LED display.
12:34
B
C F
E
A
EXPLANATION OF DISPLAY LIGHTS
LETTER DESCRIPTION
A
B
C
D
E
“AM” INDICATOR LIGHT
ALARM-1 BUZZER INDICATOR LIGHT
ALARM-1 RADIO INDICATOR LIGHT
ALARM-2 BUZZER INDICATOR LIGHT
ALARM-2 RADIO INDICATOR LIGHT
F
D
BLUETOOTH INDICATOR LIGHT
4
NOTE: Some buttons have multiple functions based on if the function requires a
“Press” (Press & Immediately Release the button) command or a “Press & Hold”
(Press & Hold the button for 1-2 seconds) command.

NOTE: Some buttons have multiple functions based on if the function requires a
“Press” (Press & Immediately Release the button) command or a “Press & Hold”
(Press & Hold the button for 1-2 seconds) command.
SETTING THE ALARM
CAUTION: Before setting the Alarm make sure the correct TIME is shown on the LED
Display.
NOTE:Before setting the TIME make sure all of the non-clock functions (BLUETOOTH, FM,
AM) are turned OFF. If any of the non-clock functions are playing, turn the function OFF by
simply pressing & holding the FUNCTION button (1).
1. Press & hold the VOLUME DOWN / ALARM-1 button (3) until the time flashes on the
LED display and the ALARM-1 BUZZER Indicator Light(B) flashes. Once the time is
flashing you can releasethe VOLUME DOWN / ALARM-1 button (3).
2. Press the PREV / HOURbutton (6) repeatedly until the correct HOUR is shown on the
LED display.
•NOTE: The “AM” Indicator Light (A) will turn ON when the hour is set to AM.
For PM hours the “AM” Indicator Light (A) will turn OFF.
3. Press the NEXT / MINUTE button (7) repeatedly until the correct MINUTE is shown on
the LED display.
4. After setting the HOURS & MINUTES press the VOLUME DOWN / ALARM-1 button (3)
to confirm the ALARM-1 time.
5. The clock will automatically set the Alarm-1 for BUZZER and the ALARM-1 BUZZER
Indicator Light(B) will turn ON.
6. To choose to wake to RADIO simply press the VOLUME DOWN / ALARM-1 button (3)
until the ALARM-1 RADIO Indicator Light(C) turns ON.
7. To turn the ALARM OFF press the VOLUME DOWN / ALARM-1 button (3) until both the
ALARM-1 Indicator Lights (B & C) turn OFF.
12:34
B
C F
E
A
EXPLANATION OF DISPLAY LIGHTS
LETTER DESCRIPTION
A
B
C
D
E
“AM” INDICATOR LIGHT
ALARM-1 BUZZER INDICATOR LIGHT
ALARM-1 RADIO INDICATOR LIGHT
ALARM-2 BUZZER INDICATOR LIGHT
ALARM-2 RADIO INDICATOR LIGHT
F
D
BLUETOOTH INDICATOR LIGHT
5

SETTING THE SECOND ALARM
NOTE: This Alarm Clock can be set for two separate Alarm times.
NOTE:Before setting the TIME make sure all of the non-clock functions (BLUETOOTH, FM,
AM) are turned OFF. If any of the non-clock functions are playing, turn the function OFF by
simply pressing & holding the FUNCTION button (1).
1. Press & hold the VOLUME UP / ALARM-2 button (5) until the time flashes on the LED
display and the ALARM-2 BUZZERIndicator Light(E) flashes. Once the time is
flashing you can release the VOLUME UP / ALARM-2 button (5).
2. Press the PREV / HOURbutton (6) repeatedly until the correct HOUR is shown on the
LED display.
•NOTE: The “AM” Indicator Light (A) will turn ON when the hour is set to AM.
For PM hours the “AM” Indicator Light (A) will turn OFF.
3. Press the NEXT / MINUTE button (7) repeatedly until the correct MINUTE is shown on
the LED display.
4. After setting the HOURS & MINUTES press the VOLUME UP / ALARM-2 button (5) to
confirm the ALARM-2 time.
5. The clock will automatically set the Alarm-2 for BUZZER and the ALARM-2 BUZZER
Indicator Light(E) will turn ON.
6. To choose to wake to RADIO simply press the VOLUME UP / ALARM-2 button (5) until
the ALARM-2 RADIO Indicator Light(F) turns ON.
7. To turn the ALARM OFF press the VOLUME UP / ALARM-2 button (5) until both the
ALARM-1 Indicator Lights (E & F) turn OFF.
SNOOZE
Once the alarm sounds you can press the SNOOZE button (4) and the alarm will temporarily
be silenced. After Nine Minutes have passed the Alarm will sound again.
STOPPING THE ALARM
To permanently stop the alarm from sounding simply press the FUNCTION button (1) and the
alarm will automatically stop.
•NOTE: The Alarm-1 and/or Alarm-2 setting will still be ON and set for the same
time for the next day.
FUNCTION
The FUNCTION button (1) will turn the non-clock functions ON & cycle through the different
function options (BLUETOOTH, FM, AM).
•To turn the non-clock functions ON, simply press the FUNCTION button (1)
repeatedly until you arrive at the desired function (BLUETOOTH, FM, AM)
•To turn the non-clock functions OFF, press & hold the FUNCTION button (1) until the
LED display shows only the current time.
VOLUME
•To Increase Volume - Press the VOLUME UP / ALARM-2 button (5)
•To Decrease Volume - Press the VOLUME DOWN / ALARM-1 button (3)
NOTE: Some buttons have multiple functions based on if the function requires a
“Press” (Press & Immediately Release the button) command or a “Press & Hold”
(Press & Hold the button for 1-2 seconds) command.
6

PAIRING TO A BLUETOOTH DEVICE
1. Turn your Bluetooth device OFF entirely and then turn it back ON to refresh the device’s
Bluetooth memory.
2. Find the Bluetooth menu in your device and make sure the Bluetooth function is turned
ON (refer to your device’s user manual for instructions on finding the Bluetooth menu).
3. Press the FUNCTION button (1) until “BT” is shown on the LED Display and the
BLUETOOTH Indicator Light (D) flashes to indicate the clock is ready to be paired.
4. On your device, perform a Bluetooth “device discovery” to add the W-PR001BT as a
new device.
5. When the speaker is discovered your device will display “W-PR001BT” in the
Bluetooth menu.
6. If your Bluetooth device asks for a password, enter “0000” and the device will now pair
with the W-PR001BT and be ready to use.
NOTE: The BLUETOOTH Indicator Light (D) will turn solid BLUE when the speaker
has successfully paired with your device
7. If supported by your device’s menu, set the W-PR001BT as “set as authorized” or “add
to trusted devices”.
12:34
B
C F
E
A
EXPLANATION OF DISPLAY LIGHTS
LETTER DESCRIPTION
A
B
C
D
E
“AM” INDICATOR LIGHT
ALARM-1 BUZZER INDICATOR LIGHT
ALARM-1 RADIO INDICATOR LIGHT
ALARM-2 BUZZER INDICATOR LIGHT
ALARM-2 RADIO INDICATOR LIGHT
F
D
BLUETOOTH INDICATOR LIGHT
7
NOTE: Some buttons have multiple functions based on if the function requires a
“Press” (Press & Immediately Release the button) command or a “Press & Hold”
(Press & Hold the button for 1-2 seconds) command.

LISTENING TO A BLUETOOTH DEVICE
After successfully pairingyour Bluetooth device with theW-PR001BT, youcanbegin
playingmusic simply by choosingthesong you wish to hear on your device’s menu system
(refer to your device’s user manual for instructionon playingmusic).
To Play or Pause music press the SNOOZE button (4)
To Skip tothe Next song press the NEXT / MINUTE button (7)
To Skip tothe Previous song press the PREV / HOURbutton (6)
NOTE: All Playback controls (Play, Pause, Skip + / -, etc.) can also be controlled directly on
yourBluetooth device.
LISTENING TO RADIO
1. Press the FUNCTION button (1) repeatedly until the LED Display shows a FM Radio
frequency (such as “93.3” or “103.3”).
2. To listen to AM Radio simply press the FUNCTION button (1) until the LED Display
shows an AM Radio frequency (such as “880” or “1040”).
3. To change to a different Radio Station (Frequency) press the NEXT / MINUTE button (7)
to tune to a higher numbered station, or press the PREV / HOURbutton (6) to tune to a
lower numbered station.
•TIPS FOR BEST RECEPTION
oThe AM & FM antennas are built-in tothe cabinet of this player. To improve
reception of radio stations simply move the entire player to another location
until reception improves.
RADIO PRESETS
This Alarm Clock can store 10-FM & 10-AM radio stations in the Preset memory. To store
preset stationsfollow the steps below.
1. Use the NEXT / MINUTE (7) or PREV / HOUR(6) buttons totune tothe desired radio
station.
2. Press & hold the CLOCK / MEMORY button (2) until “P01”flashes on the LED Display.
3. Use the NEXT / MINUTE (7) or PREV / HOUR(6) buttonsto choose which preset
(P01 – P10) you wish to use for the current Radio Station.
4. Press the CLOCK / MEMORY button (2) to set the current Radio Station tothe selected
preset shown on the LED Display.
5. Repeat steps 1-4 to set additional presets into the memory.
To tune directlyto your Radio Presets simply press the CLOCK / MEMORY button (2)
repeatedly to cycle through the Presets stored in the memory.
NOTE: Some buttons have multiple functions based on if the function requires a
“Press” (Press & Immediately Release the button) command or a “Press & Hold”
(Press & Hold the button for 1-2 seconds) command.
8

SLEEP FUNCTION
This Alarm Clock can be set to play music for a set amount of time (10-60 minutes) and then
automaticallyturn OFF using the SLEEP Timer.
To turn the SLEEP Timer function ON simply press the SLEEPbutton (4) and “90” will show
on the LED Display indicating the music will automatically turn OFF after 90 minutes.
To adjust the amount of time before the music will turn OFF, press the SLEEPbutton (4)
repeatedly until the correct amount of time (90 – 80 -70 – 60 – 50 – 40 – 30 – 20 – 10
minutes) is shown on the LED Display.
To turn the SLEEP Timer OFF continue pressing the SLEEPbutton (4) until the LED Display
shows “OFF”.
BATTERY INSTALLATION FOR POWER BACKUP - Requires 2 AAA Batteries (Not
Included)
In case of a Power failure, the Battery Backup will keep the Clock & Alarm times accurate
until the main power has been restored.
During a power failure the LED display will remain OFF until power has been restored.
NOTE: Batteries are not required for normal use of this clock.The purpose of the Battery
Backup istoinsure the correct Time & Alarm settings are stored in the Clock Memory in the
event of a power failure.
•Open the Battery Compartment by gently pushing the tab on the compartment doorin
the direction indicated on the bottom of the clock.
•Insert 2 AAA batteries (not included)following the +/ - polarity as indicated inthe
compartment.
•Replace the door tothe Battery Compartment and make sure it properly clicks in
place.
NOTE: Do not force the door as breakage may occur.
TROUBLESHOOTING
Symptom
Possible Cause
Solution
Alarm did not sound
- Alarm was not properly turned
ON.
- Alarm was not set to the correct
Time (AM / PM)
- Check the LED Display Lights
to insure the correct Alarm is
turned ON
- Check the Alarm Time reset
as necessary
No sound
- Clock not in correct Function.
- Volume set at minimum
- Press the FUNCTION button
(1) to the desired Function
(Bluetooth, FM, AM).
- Increase Volume.
Time is Flashing
- Power Loss
- Reset the Time
9

LIMITED 90-DAY WARRANTY
We warrant this product to be free from defects in material and workmanship under normal
use for a ninety-day period from the original date of purchase from an authorized
BLUESTREAM dealer.
Should you be missing any of the included accessories or other components (screws, pieces,
etc.), please contact the Customer Support Center to secure a replacement. It is not
necessary to bring the unit back to the store. When calling, please reference the parts list
found in the Instruction Manual to help us accurately identify the missing parts and promptly
provide replacements.
We will replace the unit free of charge should it become defective under this warranty,
providing you, the original purchaser, have your original dated sales receipt.
To obtain warranty service or replacement within the ninety-day warranty period, please
return the product with all parts and accessories along with your original dated store receipt to
the original place of purchase and the unit will be exchanged at no charge. It is not necessary
to contact the manufacturer for warranty replacement.
Our Customer Support Center is available Monday - Saturday (10:00AM to 7:00PM EST) for
technical assistance or troubleshooting. To contact us, please call 1-855-719-8324, or visit
www.sibrandssupport.com.
This warranty applies only under conditions of normal use. Our products are not intended for
outdoor use.
There are no consumer serviceable parts contained in this product and any attempt by the
ownerto service or repair the unit will immediately void all warranty coverage.
This warranty does not cover any product which has been subject to damage due to an act of
nature, misuse, neglect, accident, abuse, commercial use, or modification of, or to, any part of
the product, including the antenna. Damage to any external media such as smartphones,
tablets, memory storage, and/or other devices are not covered nor is the cost incurred in
shipping the unit for warranty repair or exchange. Underno circumstances shall
BLUESTREAM be liable for any loss (direct, indirect, incidental, foreseen, unforeseen, special
or consequential) or for any damage arising out of, or in connection with, the use of this
product.
UNDER NO CIRCUMSTANCES WILL BLUESTREAM BE LIABLE FOR ANY INCIDENTAL
OR CONSEQUENTIAL DAMAGES.
This warranty does not cover re-manufactured, refurbished, or repaired units, or any products
sold 'As Is'.
This warranty is valid only to the original purchaser of the Product in the United States and
Canada and grants specific legalrights.
10