BMW 65 12 2 182 508 User manual

01 29 2 221 219 5/2012© BMW AG, Munich (Z/Z) 1
Original BMW Accessories.
Installation Instructions.
5/2012
DVD Changer Retrofit
BMW 6 Series (F06, F 12, F 13)
These instructions are only valid for cars with SA 7SP (BMW Professional navigation system with
integrated Bluetooth mobile phone preparation) or with SA 609 (BMW Professional navigation
system).
Retrofit kit number
65 12 2 183 731 DVD changer retrofit kit
65 12 2 182 508 Video switch retrofit kit
Installation time
The installation time is 3.0 hours. If the video switch retrofit kit needs to be installed, the installation time will
increase by 1.5 hours. This may vary depending on the condition of the car and the equipment in it.
The installation time specified does not include the time spent on programming/coding. The calculation of the total
costs for the programming time must be factored into the calculation of retrofitting costs (no invoicing via warranty).
Important information
These installation instructions are primarily designed for use within the BMW dealership organisation and by
authorised BMW service companies.
In any event, the target group for these installation instructions is specialist personnel trained on BMW cars with
the appropriate specialist knowledge.
All work must be completed using the latest BMW repair manuals, wiring diagrams, servicing manuals and work
instructions, in a rational order, using the prescribed tools (special tools) and observing current health and safety
regulations.
In the event of any installation or functional problems, restrict the troubleshooting session to about
0.5 hours for mechanical work or 1 hour for electrical work.
To avoid unnecessary extra work and/or costs, an inquiry is to be sent straight away to the technical parts support
via the After Sales Assistance Portal (ASAP).
Quote the following information:
- Chassis number,
- Retrofit kit part number,
- A detailed description of the problem,
-Any work already carried out.
Do not archive the hard copy of these installation instructions since daily updates are made via ASAP!
Pictograms
Denotes instructions that draw your attention to dangers.
Denotes instructions that draw your attention to special features.
Denotes the end of the instruction or warning text.
!
© BMW AG, Munich 01 29 2 221 219 (Z/Z)

5/201201 29 2 221 219© BMW AG, Munich (Z/Z) 2
Installation information
When routing fibre optic cables, make sure the bending radius is no less than 25 mm.
Refer to the instructions for handling fibre optic cables acc. to ISTA No. 61 00 ....
Ensure that the cables and/or lines are not kinked or damaged as you install them in the car. Costs arising from this
will not be reimbursed by BMW AG.
Additional cables/lines that you install must be secured with cable ties.
If the specified PIN chambers are occupied, bridges, double crimps or twin-lead terminals must be used.
All pictures show LHD cars; proceed accordingly on RHD cars.
After the installation work, the retrofit must be programmed/coded via the – Conversions – path.
The video switch retrofit kit must only be installed if input 3 on the radio receiver is occupied or in cars with RSE
(for the assignment of inputs on the radio receiver, see the section entitled "Information on pin assignment on the
radio receiver" at the end of these installation instructions). Special tools required
Ordering instructions
DVD changer B and the cable tie with holder I are not part of the retrofit kit and must be ordered separately (for part
numbers and instructions, see EPC).
If the video switch retrofit kit is installed, video switch AA must be ordered separately (for the part number and
instructions, see the EPC).
List of special equipment
The following special equipment must be taken into consideration when installing the retrofit kit:
SA 3AG Rear view camera
SA 6UK Night vision with person recognition
SA 5DL Surround view
SA 601 TV function
SA 609 Professional navigation system
SA 7SP Professional navigation system with integrated Bluetooth mobile phone preparation
Special tools required
00 9 317, Installation wedge
54 3 120, Support

Table of contents
Section Page
© BMW AG, Munich 301 29 2 221 219 5/2012 (Z/Z)
1 DVD changer parts list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2 Video switch parts list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
3 Preparatory work . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
4 DVD changer retrofit cable connection diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
5 Video switch connection diagram. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
6 Adapter cable connection diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
7 LHD DVD changer installation and cabling diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
8 RHD DVD changer installation and cabling diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
9 Video switch installation and cabling diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
10 Installing and connecting the video switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
11 Routing and connecting the DVD changer retrofit cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
12 Installing and connecting the DVD changer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
13 Concluding work and programming/coding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
14 DVD changer wiring diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
15 Video switch wiring diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
16 DVD changer/TV/camera adapter cable wiring diagram. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
17 Information on pin assignment on the radio receiver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

5/201201 29 2 221 219© BMW AG, Munich (Z/Z) 4
Legend
ADVD changer retrofit cable
BDVD changer (not supplied with the retrofit kit)
CMount
DScrews (4 x)
ECable tie 200 x 3.6 mm (10 x)
FMiniature connector
G7.5 A fuse
HSocket casing (SW 12-pin)
ICable tie with holder (not supplied with the retrofit kit)
J5 A fuse (not required)
KCover (2 x)
A
E F G JH I
B C D
F12 0014 Z
1. DVD changer parts list

5/201201 29 2 221 219© BMW AG, Munich (Z/Z) 5
Legend
AA Video switch (not supplied with the retrofit kit)
AB Video switch retrofit cable
AC DVD changer adapter cable
AD SW 3-pin socket casing
AE TV adapter cable
AF RT/GE additional cable (not required)
AG Video switch power supply RT/SW additional cable (not required)
AH Hexagon nut M6
AI 5A fuse
AJ Miniature connector (2 x)
AK Cable tie (20 x)
AL 10 A fuse (not required)
AA
AB AF AGAEADAC
AK
AJAI AL
AH 010 0080 Z
2. Video switch parts list