Bob's Discount Furniture BOULDER WALL UNIT 20032436 User manual

Page 1 of 4
Wire Brush 52" Bridge With Side Panels
CARE & MAINTENANCE : The touch ofa so cloth is all the maintenance the finish will ever need. Please do not use harsh or abrasive cleaners for polishing, as they may
cause damage to the finish. Periodic checks are recommended to make sure that all hardware is securely ghtened.
Examine all packaging material for small parts that may have come loose during shipment. Periodic checks are recommended to insure that all components
are in proper position, tight and free from damage. Keep this assembly instruction for future reference. Adult assembly is require
.
QTYCODE HARDWARE
23
18
1
1
8
2
1
2
3
4
5
6
M4 x 20mm Wood Screws
6.3 x 35mm Allen Bolts
6.3 x 50mm Allen Bolt
M4 Allen Wrench
M4 x 15mm Wood Screws
Metal Brackets
QTYCODE COMPONENTSCOMPONENTS
2C
CODE
DBoom Panel
F Side Boxes (Le/Right)
Side Panels
1EBack Panel
QTY
1
2
1ABCenter PanelsTop Panel 1
2
A
B
FIGURE 1
A
B
STEP 1 - Figure 1
Begin assembly by securing Center Panel (B)
underneath Top Panel (A) using 2 Allen Bolts (2)
per center panel.
2

CARE & MAINTENANCE : The touch ofa soft cloth is all the maintenance the finish will ever need. Please do not use harsh or abrasive cleaners for polishing,
as they may cause damage to the finish. Periodic checks are recommended to make sure that all hardware is securely tightened.
C
STEP 2 - Figure 2
Next aach Side Panels (C) to Top Panel (A) using
2 Allen Bolts (2) per side.
2
A
A
C
FIGURE 2
C
C
B
C
D
2
2
2
STEP 3 - Figure 3
Line up holes of Boom Panel (D) with pegs in
Center Panel (B). Secure Boom Panel (D) to
Center Panel (B) using Allen Bolts (3). Secure
Boom Panel (D) to Side Panels (C) using 2 Allen
Bolts (2) per side.
3
FIGURE 3
Page 2 of 4
Wire Brush 52" Bridge With Side Panels

Page 3 of 4
CARE & MAINTENANCE : The touch ofa soft cloth is all the maintenance the finish will ever need. Please do not use harsh or abrasive cleaners for polishing,
as they may cause damage to the finish. Periodic checks are recommended to make sure that all hardware is securely tightened.
1
E
STEP 4 - Figure 4
Aach Back Panel (E) to assembly using 14 Wood
Screws (1). Tighten screws using Philips head
screwdriver (not included).
1
1
1
1
1
1
1
1
1
1
1
1
1
FIGURE 4
2
2
F
C
STEP 5 - Figure 5
Aach Side Boxes (F) to Side
Panels (C) using 4 Allen Bolts (2)
per box. Tighten all bolts using
Allen Wrench (4) provided.
FIGURE 5
A
F
F
C
C
A
Wire Brush 52" Bridge With Side Panels

CARE & MAINTENANCE : The touch ofa soft cloth is all the maintenance the finish will ever need. Please do not use harsh or abrasive cleaners for polishing,
as they may cause damage to the finish. Periodic checks are recommended to make sure that all hardware is securely tightened.
STEP 6 - Figure 6
Next secure the Bridges to the Piers with
Metal Brackets (6) using 4 Screws (5) per
bracket. Tighten screws with Philips head
screwdriver (not included).
5
5
5
5
FIGURE 6
6
Page 4 of 4
Wire Brush 52" Bridge With Side Panels