bObsweep bObi User manual

Quick Start
Quick Start Guide
Here’s What You’ll Need:
All parts are included in bObi’s box.
Philips Head
Screwdriver Battery Charging Station Charging Adapter
Step 1:
Install the Battery
Remove the battery cover. Plug the battery
in at the circuit junction. Tuck the wire into
the side of the compartment and slide the
battery in.
Step 2:
Charge bObi
Place bObi on her charging station with the
metal nodes on her front resting against
the plates on her station and allow her to
charge.
Step 3:
Let bObi Sweep!
Press the GO! button on bObi’s cover.
Before starting, remove the clear plastic on bObi’s power switch
and ip the power switch ON.
When Charging:
The center light will blink to
indicate that bObi is charging.
Cleaning can be overwhelming, so we kept things simple.
In just a few easy steps, bObi will be ready to work!
Important Note:
bObi automatically returns to her
charging station when low on
battery. If bObi is having trouble
nding her station, you will need
to sync it. Refer to the Charging
section of bObi’s manual.
When Fully Charged:
The center light will remain solid.

bObsweep
Loving the Pawduct?
Leave us a review! Rate us 5 stars and share your
feedback on the site where you purchased bObi.
Not Impurressed?
Let us help! Contact our support team at
[email protected] or 1-888-549-8847.
Our business hours are Monday – Friday,
9 a.m. – 5 p.m. Pacic Time.