bodhi Shelfmate Installation guide

M E E T T H E OT H E R M AT E S
shelf
1 pc
frame
1 pc
shelf adjuster
1 pc*
hex screws
2 pcs
screws
2 pcs
S H E L F M A T E
L E T ’ S G E T S TA RT E D !
A S S E M B L I N G I N S T R U C T I O N S
( check if all parts are in the box )
TOOLS YOU NEED TO PREPARE
*note : SHELFMATE A and C has 2 adjusters
B, D and E have only 1
d-Bodhi Pte Ltd - All rights reserved | d-Bodhi 315 Outram Road #03-02 / Singapore 169074
c
S H E L F M AT E :
Hi there! We are d-Bodhi, a furniture and lifestyle company that works mainly with
reclaimed and recycled materials. If you like SHELFMATE make sure to check out more
of our products on: d-Bodhi.com/shelfmate
a d-Bodhi product.
facebook.com/dbodhi
@dbodhi
pinterest.com/dbodhi
d-Bodhi.com
35x25.5x35 cm
B
50x25.5x35 cm
20x25.5x35 cm
E
25x25.5x75 cm
D
A
65x25.5x35 cm
allen key screwdriverdrill marker / pencil
(included)
wall plugs
printed on recycled paper, of course
C

Place the adjuster(s)
STEP 2
Attach screws to the wall. Hang the SHELFMATE
and fine tune with adjuster(s) (A)
STEP 3
Congratulations!
Your SHELFMATE is ready
STEP 4
A S S E M B L I N G & H A N G I N G
Screw the shelf in its frame as pictured
above, then tighten the screws (A)
STEP 1
A
H A N G I N G M U LT I P L E M A T E S
M A K E I T E A S Y, U S E T H E TO O L K I T
More hanging tips on our website:
www.d-bodhi.com/shelfmate
2. Pierce the drill marks, position the box
and transfer the marks to the wall
3. Drill holes at the marked spots
S PAC I N G
A
Use the Tee to position the SHELFMATE modules
towards each other horizontally and vertically
4. Screw the screw into the wall
(use plugs if necessary)
Pierce the centre of the cross marks to drill your holes in the right place.
T H A N K S
MAT E
for
cho osi ng
Use the tee to align the SHELFMATES
to each other horizontally and vertically.
1. Cut out the measurement Tee (A)
and use the inside of the box as
a drill hole template (B)
B
A
note: SHELFMATE B, D and E have only 1 adjuster